BCM8702 [BOARDCOM]

10-GbE XAUI TRANSCEIVER WITH HIGH-SPEED REDUNDANCY; 随着高速冗余万兆以太网XAUI收发器
BCM8702
型号: BCM8702
厂家: Broadcom Corporation.    Broadcom Corporation.
描述:

10-GbE XAUI TRANSCEIVER WITH HIGH-SPEED REDUNDANCY
随着高速冗余万兆以太网XAUI收发器

以太网
文件: 总2页 (文件大小:152K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
BCM8021  
®
10-GbE XAUITRANSCEIVER WITH HIGH-SPEED REDUNDANCY  
S U M M A R Y O F B E N E F I T S  
F E A T U R E S  
10-GbE transceiver supporting various operating modes  
Advanced 0.13µ CMOS process technology provides  
unparalleled performance while achieving the lowest possible  
power consumption  
IEEE 802.3™ae-compliant XAUI™ to XGMII transceiver  
XAUI-to-XAUI retiming  
Low power dissipation  
Less than 300 mW per transceiver channel including I/O  
SONET/SDH-quality jitter performance  
IEEE 802.3ae 10-GbE physical coding sublayer (PCS) has a  
selectable 8B/10B encoding/decoding block on-chip that can  
be configured to support the 10-Gbps attachment unit  
interface (XAUI)  
Less than three picoseconds rms jitter generation  
Exceeds SONET jitter tolerance mask  
Superior jitter characteristics enable the serializing/  
deserializing (SerDes) of data signals transmitted through  
front panel or backplane networking equipment supporting  
both primary and protection circuits  
High performance programmable receive equalization and  
transmit pre-emphasis  
Transmit pre-emphasis for interoperability with CML SerDes  
Receive equalization for copper interconnects  
Drive PMD devices or backplane directly with no external  
clean-up circuit required  
Enhanced test capability  
Full loopback and on-chip PRBS generator/checker  
IEEE (1149.1) JTAG  
Simplifies manufacturability with integrated built-in self-test  
(BIST), high-speed and low-speed loopbacks, and  
programmable PRBS generator/checker  
Compact 21-mm × 21-mm BGA package  
No requirement for heat sink or airflow  
Decreases complexity and reduces board space on  
multichannel linecard designs  
A P P L I C A T I O N S  
1-GbE and 10-GbE LAN, MAN, WAN switches and routers  
Advanced test equipment (ATE)  
XAUI SerDes Application Diagram  
O V E R V I E W  
BCM8021 Block Diagram  
The BCM8021 device integrates XAUI serializer/deserializer (SerDes)  
On the serial side of the device, transmitters and receivers support XAUI  
serial transmission rates. An on-chip phase lock loop (PLL) synthesizes  
the supplied reference clock to support the desired transmit rate, while  
vlock and data recovery (CDR) units recover the receive rate clock for  
timing.  
channels leveraging Broadcom’s high-performance mixed-signal design  
experience along with advanced 0.13µ CMOS process technology. This,  
combined this with a robust architecture offering the highest degree of  
flexibility, results is a highly programmable, lowest power SerDes  
solution for network line-card and backplane applications.  
For high-speed serial copper connections, the device incorporates both  
transmit pre-emphasis on the transmit channels and receive equalization  
on the receive channels. Transmit pre-emphasis is programmable to  
improve the overall cable reach and compensate for electrical  
imperfections associated with traces and connectors. Receive  
equalization provides optimal performance over a variety of receive  
interfaces.  
An internal MUX connects the parallel and serial ports to enable fully  
redundant operation. The MUX enables an active serial link to be  
switched to the parallel interface, while a protection serial link can be  
continuously monitored to insure its condition. If the active link fails, the  
protection link can be muxed over through external control to the parallel  
interface.  
On the parallel side of the device, transmitters and receivers interface  
with a 32-bit wide data (XGMII) along with the clock and control  
signals. The low-speed I/O supports HSTL (1.5V or 1.8V) or SSTL_2  
(2.5V) interfaces.  
Highly programmable test capabilities exist within the device to support  
high-speed and low-speed loopback using generators/checkers that  
support PRBS 27 to 231 patterns along with IEEE802.3ae-defined test  
patterns. A complete evaluation kit, including an evaluation board,  
related software, and documentation is available upon request.  
Broadcom®, the pulse logo, Connecting everything®, and the Connecting everything logo are among  
the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries  
and/or the EU. Any other trademarks or trade names mentioned are the property of their respective  
owners.  
®
BROADCOM CORPORATION  
16215 Alton Parkway, P.O. Box 57013  
Irvine, California 92619-7013  
Phone: 949-450-8700  
Fax: 949-450-8710  
E-mail: info@broadcom.com  
Web: www.broadcom.com  
© 2006 by BROADCOM CORPORATION. All rights reserved.  
8021-PB04-R  
04/14/06  

相关型号:

BCM8703

MULTILAYER 12-PORT GIGABIT ETHERNET STACKABLE SWITCH
BOARDCOM

BCM8704

QUAD XAUI/CX4/LX4 1.0-3.2-GBPS RETIMER/SWITCH
BOARDCOM

BCM8705

SERIAL 10-GBE/FIBRE CHANNEL TRANSCEIVER WITH WIS LAYER AND
BOARDCOM

BCM8705BIFBG

SERIAL 10-GBE/FIBRE CHANNEL TRANSCEIVER WITH WIS LAYER AND
BOARDCOM

BCM8705LAKFBG

SERIAL 10-GBE/FIBRE CHANNEL TRANSCEIVER WITH WIS LAYER AND XAUI™ INTERFACE
BOARDCOM

BCM8706

XAUI TO SERIAL 10G BASE-LRM TRANSCEIVER
BOARDCOM

BCM8706BIFBG

XAUI TO SERIAL 10G BASE-LRM TRANSCEIVER
BOARDCOM

BCM8727

DUAL-CHANNEL 10-GBE SFI-TO-XAUI™ TRANSCEIVER WITH EDC
BOARDCOM

BCM8727BIFBG

DUAL-CHANNEL 10-GBE SFI-TO-XAUI™ TRANSCEIVER WITH EDC
BOARDCOM

BCM88335

Single-Chip 5G Wi-Fi IEEE 802.11ac MAC/Baseband/ Radio with Integrated Bluetooth 4.1 for Automotive Applications
CYPRESS

BCM88335L2CUBG

Telecom Circuit, 1-Func, PBGA145, WLBGA-145
CYPRESS

BCM88335L2CUBGT

Single-Chip 5G Wi-Fi IEEE 802.11ac MAC/Baseband/ Radio with Integrated Bluetooth 4.1 for Automotive Applications
CYPRESS