PSMPD65 [WALL]
Dual Output Up to 65 Watts AC/DC Medical Power Supply; 双输出高达65瓦AC / DC医疗电源型号: | PSMPD65 |
厂家: | WALL INDUSTRIES,INC. |
描述: | Dual Output Up to 65 Watts AC/DC Medical Power Supply |
文件: | 总3页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSMPD65 Series
Dual Output
Up to 65 Watts
FEATURES
• Medical Application
• Compact Size, Light Weight
• 100% Full Load Burn-In Test
• Universal AC Input/ Full Range
• UL2601-1, EN60601-1 Approved
• Built-In EMI Filter, Low Ripple Noise
• High Efficiency, Low Working Temperature
• Soft-Start Circuit, Limiting AC Surge Current
• Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: PSMPD65 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
90 – 264VAC (127 – 370VDC)
47 to 440Hz
AC Current (typical)
Inrush Current
Leakage Current
1.6A @ 115VAC / 1A @ 230VAC
20A @ 115VAC cold start / 40A @ 230VAC cold start.
Less than 0.3mA @ 264VAC
OUTPUT SPECIFICATIONS
Output Voltage
Output Voltage Tolerance
Output Adjustment Range
Output Power (max)
Line Regulation
Load Regulation
Output Current
Ripple & Noise (20MHz BW)
Setup, Rise Time
Hold-Up Time
See Table
±4.0% (CH.1) and ±7.0% (CH.2)
CH1: ±10% rated output voltage.
72 Watts with 18CFM min. forced air.
±1% (CH.1) and ±2% (CH.2)
±3% (CH.1) and ±4% (CH.2)
See Table
See Table
800ms and 20ms at full load and 230VAC.
80ms at full load and 230VAC.
±0.04%/°C (0~50°C) on +5V output.
Temperature Coefficient
PROTECTION
Over Voltage Protection
Overload Protection
GENERAL SPECIFICATIONS
Switching Frequency (fixed)
Efficiency
CH.1 115~135% rated output voltage.
73~105W hiccup mode, auto-recovery.
45KHz
PSMPD-65A: 75% PSMPD-65B: 78%
4000VAC for 1 min.
Isolation Voltage (input to output)
Isolation Voltage (input to field ground)
Isolation Resistance
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity (non-condensing)
Vibration
1500VAC for 1min.
100M/500VDC ohms
-10°C to +55°C (refer to derating curve)
-20°C to +85°C (10%~95% RH)
20% to 90% RH
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.
291,300 hours min.
MTBF
MIL-HDBK-217 (25°C)
PHYSICAL SPECIFICATIONS
Weight
Dimensions
280g
127(L) x 76(W) x 42(H) mm
SAFETY & EMC
Agency Approvals
UL/ CUL/ TUV/ CB/ CE
UL2601-1, TUV EN60601-1, IEC601-1 Approved
EN55011 class B, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2,3, EN60601-1-2, ENV50204
Safety Standards
EMC Standards
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSMPD65 Series
Dual Output
Up to 65 Watts
OUTPUT VOLTAGE / CURRENT RATING CHART
Input
Output
Voltage
5 VDC
Output Current
Range
Output
Current
5.5A
Ripple &
Noise
Output
Power
61W
Model
Voltage
Channel 1
0.4 ~ 7.0A
0.2 ~ 3.2A
0.4 ~ 6A
60mVp-p
150mVp-p
60mVp-p
150mVp-p
PSMPD65A
PSMPD65B
90~264VAC
127~370VDC
Channel 2
Channel 1
Channel 2
12 VDC
5 VDC
24 VDC
2.8A
3.5A
2A
66W
0.2 ~ 2.6A
NOTES
1. All parameters are specified at 230VAC input, rated load, 25°C ambient.
2. Tolerances include set up tolerance, line regulation, load regulation.
3. Line regulation is measured from low line to high line at rated load.
4. Mounting holes M1 and M2 should be grounded for EMI purposes.
5. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47uF capacitor.
BLOCK DIAGRAM
DERATING CURVE
STATIC CHARACTERISTICS
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSMPD65 Series
Dual Output
Up to 65 Watts
MECHANICAL DRAWING
Unit: mm
AC Input Connector (CN1): Molex 5277-02 or equivalent
DC Output Connector (CN2): Molex 5273-06 or equivalent
Pin. No
Assignment
Mating Housing
Terminal
Pin No.
Assignment
Mating Housing
Terminal
1
2
AC/N
1
+V
+5V
COM
NC
Molex 5195
Molex 5194
or equivalent
or equivalent
AC/L
2,3
4,5
6
Molex 5195
Molex 5194
or equivalent
or equivalent
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
©2020 ICPDF网 联系我们和版权申明