PSMPS-45-24 [WALL]

Single Output Up to 48 Watts AC/DC Medical Power Supply; 单路输出高达48瓦AC / DC医疗电源
PSMPS-45-24
型号: PSMPS-45-24
厂家: WALL INDUSTRIES,INC.    WALL INDUSTRIES,INC.
描述:

Single Output Up to 48 Watts AC/DC Medical Power Supply
单路输出高达48瓦AC / DC医疗电源

医疗
文件: 总3页 (文件大小:157K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PSMPS45 Series  
Single Output  
Up to 48 Watts  
AC/DC Medical Power Supply  
FEATURES  
Medical Application  
Low Cost, High Reliability  
Compact Size, Light Weight  
100% Full Load Burn-In Test  
Universal AC Input / Full Range  
UL2601-1, EN60601-1 Approved  
Built-In EMI Filter, Low Ripple Noise  
High Efficiency, Low Working Temperature  
Protections: Short Circuit /Overload /Over Voltage  
SPECIFICATIONS: PSMPS45 Series  
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.  
We reserve the right to change specifications based on technological advances.  
INPUT SPECIFICATIONS  
Input Voltage  
Input Frequency  
90 – 264VAC (127 – 370VDC)  
47 to 440Hz  
AC Current (typical)  
Inrush Current  
Leakage Current  
1.2A @ 115VAC / 0.7A @ 230VAC  
15A @ 115VAC; 30A@230VAC cold start  
Less than 0.3mA @ 264VAC  
OUTPUT SPECIFICATIONS  
Output Voltage  
See Table  
Voltage Tolerance  
Output Adjustment Range  
Output Power  
±2.0% typical  
±10% rated output load  
52W with 18CFM min. forced air convection  
Line Regulation  
±1%  
Load Regulation  
±2% typ.  
Output Current  
See Table  
Ripple & Noise (20MHz BW)  
Setup, Rise Time  
See Table  
800ms and 30ms @ 230VAC and full load / 1200ms and 30ms @ 115VAC and full load  
50ms @ 230VAC and full load / 16ms @ 115VAC and full load.  
±0.04%/°C (0~50°C)  
Hold-Up Time  
Temperature Coefficient  
PROTECTION  
Over Voltage Protection  
Overload Protection  
GENERAL SPECIFICATIONS  
Switching Frequency (fixed)  
Efficiency  
CH.1: 115~135% rated output voltage  
53~75W hiccup mode, auto-recovery  
45KHz  
76% typical  
4000VAC for 1 min.  
1500VAC for 1 min.  
100M/ 500VDC  
Isolation Voltage (Input to Output)  
Isolation Voltage (Input to Field Ground)  
Isolation Resistance (Input to Output)  
ENVIRONMENTAL SPECIFICATIONS  
Operating Temperature  
Storage Temperature  
Operating Humidity (non-condensing)  
Vibration  
-10°C to +60°C (refer to derating curve)  
-20°C to +85°C  
20% to 90% RH  
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.  
366,100 hours min. (According to MIL-HDBK-217) at 25°C  
MTBF  
PHYSICAL SPECIFICATIONS  
Weight  
230g  
Dimensions  
127(L) x 76(W) x 28(H) mm  
SAFETY & EMC  
Safety Standards  
UL2601-1, TUV EN60601-1, IEC601-1 Approved  
EN55011 class B, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2,3, EN60601-1-2, ENV50204  
EMC Standards  
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833  
603-778-2300 www.wallindustries.com Fax 603-778-9797  
PSMPS45 Series  
Single Output  
Up to 48 Watts  
AC/DC Medical Power Supply  
OUTPUT VOLTAGE / CURRENT RATING CHART  
Output  
Voltage  
3.3 VDC  
5 VDC  
Output Current  
Output  
Current  
8A  
Model  
Input Voltage  
Ripple & Noise  
Output Power  
Range  
0 - 10.7A  
0 - 10.5A  
0 - 7A  
PSMPS-45-3.3  
PSMPS-45-5  
80mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
26.4W  
40W  
40.5W  
44.4W  
44.6W  
45W  
45.6W  
45.9W  
48W  
8A  
PSMPS-45-7.5  
PSMPS-45-12  
PSMPS-45-13.5  
PSMPS-45-15  
PSMPS-45-24  
PSMPS-45-27  
PSMPS-45-48  
7.5 VDC  
12 VDC  
13.5 VDC  
15 VDC  
24 VDC  
27 VDC  
48 VDC  
5.4A  
3.7A  
3.3A  
3A  
1.9A  
1.7A  
1A  
0 - 4.4A  
0 - 3.9A  
0 - 3.5A  
0 - 2.2A  
0 - 1.95A  
0 - 1.1A  
90~264 VAC  
(127~370 VDC)  
NOTES  
1. All parameters are specified at 230VAC input, rated load, 25°C ambient.  
2. Tolerances include set up tolerance, line regulation, load regulation.  
3. Line regulation is measured from low line to high line at rated load.  
4. Mounting holes M1 and M2 should be grounded for EMI purposes.  
5. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47uF capacitor.  
BLOCK DIAGRAM  
DERATING CURVE  
STATIC CHARACTERISTICS  
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833  
603-778-2300 www.wallindustries.com Fax 603-778-9797  
PSMPS45 Series  
Single Output  
Up to 48 Watts  
AC/DC Medical Power Supply  
MECHANICAL DRAWING  
Unit: mm (inches)  
AC Input Connector (CN1): Molex 5277-02 or equivalent  
DC Output Connector (CN2): Molex 5273-06 or equivalent  
Pin. No  
Assignment  
Mating Housing  
Terminal  
Pin No.  
Assignment  
Mating Housing  
Terminal  
1
2
AC/N  
1,2,3  
+V  
-V  
Molex 5195  
Molex 5194  
Molex 5195  
Molex 5194  
or equivalent  
or equivalent  
or equivalent  
or equivalent  
AC/L  
4,5,6  
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833  
603-778-2300 www.wallindustries.com Fax 603-778-9797  

相关型号:

PSMPS-45-27

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS-45-3.3

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS-45-48

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS-45-5

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS-45-7.5

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS30

Single Output Up to 30 Watts AC/DC Medical Power Supply
WALL

PSMPS45

Single Output Up to 48 Watts AC/DC Medical Power Supply
WALL

PSMPS65

Single Output Up to 65 Watts AC/DC Medical Power Supply
WALL

PSMPS65-12

Single Output Up to 65 Watts AC/DC Medical Power Supply
WALL

PSMPS65-13.5

Single Output Up to 65 Watts AC/DC Medical Power Supply
WALL

PSMPS65-15

Single Output Up to 65 Watts AC/DC Medical Power Supply
WALL

PSMPS65-24

Single Output Up to 65 Watts AC/DC Medical Power Supply
WALL