PSLS03-15B24S(-F) [WALL]
Low Power Consumption, Green Power;
| 型号： | PSLS03-15B24S(-F) |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | Low Power Consumption, Green Power |
| 文件： | 总6页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
SIP
SIP with 90º Bend
FEATURES
• Ultra Wide Input Voltage Range of
85~305VAC/70~430VDC
• Low Power Consumption, Green Power
• High Efficiency & High Power Density
• Flexible Design of Peripheral Circuit
Reduces Layout Problems
• RoHS Compliant
• Over Current and Short Circuit
Protection
• Industrial Grade
• IEC60950, EN60950, UL60950, UL,
CE, and CB Approvals
DESCRIPTION
This PSLS03 series of AC/DC converters offers up to 3 watts of output power in
either a SIP model or SIP model with a 90º bend. This series consists of single
output models with an ultra-wide input voltage range of 85-305VAC. Each model in
this series has low power consumption, high efficiency and high power density, as
well as over current and short circuit protection. This series has IEC60950,
EN60950, UL60950, UL, CE, and CB approvals.
Size: 1.38in x 0.65in x 0.43in
(35mm x 16.45mm x 11mm)
Size: 1.38in x 0.71in x 0.43in
(35mm x 18mm x 11mm)
MODEL SELECTION TABLE
Nominal Output
Model Number(1)
Input Voltage Range
Output Current Ripple & Noise Output Power Maximum Capacitive Load Efficiency
Voltage
3.3V
5V
PSLS03-15B03S(-F)
PSLS03-15B05S(-F)
PSLS03-15B09S(-F)
PSLS03-15B12S(-F)
PSLS03-15B15S(-F)
PSLS03-15B24S(-F)
600mA
600mA
333mA
250mA
200mA
125mA
70mV
70mV
50mV
50mV
50mV
50mV
1.98W
3W
3W
3W
3W
820uF
680uF
470uF
470uF
330uF
100uF
65%
70%
73%
74%
75%
77%
85-305VAC
(70-430VDC)
9V
12V
15V
24V
3W
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage (115V and 230V), <75% Humidity and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC Input
DC Input
85
70
47
305
430
63
0.12
0.06
VAC
VDC
Hz
Input Voltage Range
Input Frequency
Input Current
@115VAC
@277VAC
@115VAC
@277VAC
A
A
13
23
Inrush Current
Recommended External Input Fuse
OUTPUT SPECIFICATIONS
Output Voltage
1A, slow fusing, necessary
See Table
±6
3.3V Model
5-24V Models
Voltage Accuracy(2)
%
±5
3.3V Model
5-24V Models
±2.5
±1.5
±2.5
Line Regulation
Full Load
%
%
Load Regulation
10%-100% Load
Output Power
Output Current
See Table
See Table
Min. Load
10
%
Maximum Capacitive Load
See Table
Ripple & Noise(3)
20MHz bandwidth (peak to peak value)
230VAC Input
80
150
mV
W
%/ºC
Stand-By Power Consumption
Temperature Coefficient
PROTECTION
0.15
±0.15
0.25
Short Circuit Protection
Over Current Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
Continuous, Self-Recovery
500
Self-Recovery
110
%Io
-40
-40
+85
+105
85
ºC
ºC
%RH
-40 ~ -20ºC (85-110VAC)
+70~85ºC
MIL-HDBK-217F@25ºC
2.0
2.67
300,000
Power Derating
MTBF
%/ºC
Hours
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 1 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage (115V and 230V), <75% Humidity and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
TEST CONDITIONS
Min
Typ
See Table
65
0.21oz (6g)
Max
Unit
Isolation Voltage
Input-Output, 1 minute Test Time
3000
VAC
kHz
Switching Frequency
PHYSICAL SPECIFICATIONS
Weight
1.38in x 0.65in x 0.43in
(35mm x 16.45mm x 11mm)
1.38in x 0.71in x 0.43in
(35mm x 18mm x 11mm)
Free Convection
SIP Model
Dimensions (L x W x H)
SIP Model with 90º Bend
Cooling
SAFETY CHARACTERISTICS
Safety Standards & Certifications
Safety Class
IEC60950, EN60950, UL60950
Class II
CISPR32/EN55032(4)
Class A
Class B
Class A
Class B
CE
RE
CISPR32/EN55032(5)
CISPR32/EN55032(4)
CISPR32/EN55032(5)
±4kV
EMI
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-5
IEC/EN61000-4-6
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
10V/m(5)
±2kV(4)
EFT
±4kV(5)
Line to line ±1kV(4)
Line to line ±1kV/line to ground ±2kV(5)
10Vr.m.s(5)
Surge
CS
Voltage Dips, Short Interruptions and
Voltage Variations Immunity
IEC/EN61000-4-11
0%, 70%(5)
Perf. Criteria B
NOTES
1. Add -F to model name to indicate 90º corner model.
2. When 3.3V/5V/9V/12V models are working in -20-40ºC temperature range output filter capacitor C2 needs 270µF/16V solid-state capacitor.
3. Ripple & Noise are measured by “parallel cable” method.
4. See Fig. 1 for typical application circuit.
5. See Fig. 2 for recommended circuit.
6. External electrolytic capacitors are required to use modules.
7. This part is open frame, at least 6.4mm safety distance between the primary and secondary external components of the module is needed to meet
safety requirement.
8. In order to increase the conversion efficiency of the product with light load in the design, the product will have audio noise when it is operating, but
it will not affect the product’s reliability and performance.
9. Module requires dispensing fixed after assembly.
10. Product customization available.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
1/9/2018
Fax 603-778-9797
Page 2 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
DERATING CURVES
Temperature Derating Curves
Input Voltage Derating Curve
1. Input voltage should be derated based on temperature derating when it is 85-110VAC/277~305VAC/70~130VDC/400~430VDC
2. This product is suitable for use in natureal air cooling environments, if in a closed environment, please contact factory.
EFFICIENCY GRAPHS
Efficiency vs. Input Voltage (Full Load)
Efficiency vs. Output Load (Vin=230VAC)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 3 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
MECHANICAL DRAWINGS
SIP Package
Pin-Out
Pin
1
3
5
7
Function
AC (N)
AC (L)
+V (cap)
-V (cap)
-Vo
10
12
+Vo
1. It is necessary to add C1 between pin5 and pin 7
2. It is necessary to add pi-type filter circuit to the output, such as
the typical application in Fig 1.
3. It is necessary to have distance ≥6.4mm for safety between
external components in primary circuit and secondary circuit.
Note:
Units in mm [inch]
Pin diameter tolerances: ±0.10[±0.004]
General Tolerances: ±0.50[±0.020]
The layout of the device is for reference only, please refer to the
actual product.
SIP Package with 90ºC Bend
Note: Grid 2.54*2.54mm
Pin-Out
Pin
1
3
5
7
Function
AC (N)
AC (L)
+V (cap)
-V (cap)
-Vo
10
12
+Vo
1. It is necessary to add C1 between pin5 and pin 7
2. It is necessary to add pi-type filter circuit to the output, such as
the typical application in Fig.1.
Note:
Units in mm [inch]
Pin diameter tolerances: ±0.10[±0.004]
General Tolerances: ±0.50[±0.020]
The layout of the device is for reference only, please refer to the
actual product.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
1/9/2018
Page 4 of 6
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
DESIGN REFERENCE
1. Typical Application Circuit
FUSE
(Necessary)
C1
C2
L1
C3
Model
L2
NTC
C4
CY0
TVS
(Necessary)
(Necessary) (Necessary)
(Necessary)
120µF/25V
PSLS03-15B03S(-F)
PSLS03-15B05S(-F)
PSLS03-15B09S(-F)
PSLS03-15B12S(-F)
PSLS03-15B15S(-F)
PSLS03-15B24S(-F)
SMBJ7.0A
SMBJ12A
SMBJ20A
SMBJ30A
270µF16V
(Solid
Capacitor)
10µF/400V
(-20 to +85ºC)
22µF/450V
68µF/35V
47µF/35V
0.1µF/ 1nF/400
50V
1A/300V
4.7mH 13D-5
4.7µH
VAC
(-40 to +85ºC)
470µF/35V
220µF/35V
Note:
C1: AC Input, C1 is input filer capacitor (required)
DC Input is a filtering capacitor in EMC filter (required)
R1: Limit current resistance, the value of R1 is 12Ω, 2W; if the capacitance value of C1≥22µF, you cannot take.
C2 and C3 are output flier capacitors (required), C2, C3 and L1 form a pi-type filter circuit, they are recommended to be high frequency
and low impedance electrolytic capacitors. Capacitance and rated ripple current of capacitors refer to the data sheets provided by factory.
Capacitor voltage reduced to at least 80%. C4 is a ceramic capacitor, which is used to filter high frequency noise. Current of L1 and L2
refer to the data sheets provided by factory. Current rating should be 80%. TVS is a recommended component to protect post-circuit (if
converter fails). External input NTC model is recommended to use 13D-5. External input MOV model is recommended to us S14K350.
2. EMC Solution-Recommended Circuit
Components
MOV2
Recommended Parameter
S14K350
CY1
CY2/CY3
CX
2.2nF/400VAC
1nF/400VAC
0.1µF/310VAC
3.5mH
LCM
LDM
0.33mH
R2/R3
12Ω/2W
FUSE (Required)
1A/300V, Slow Fusing
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 5 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev D
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/9/2018
Page 6 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
©2020 ICPDF网 联系我们和版权申明