PSLS03-15B24SR2S [WALL]
PSLS03 SERIES;
| 型号： | PSLS03-15B24SR2S |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | PSLS03 SERIES |
| 文件： | 总6页 (文件大小：587K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
SIP
SIP with 90º Bend
FEATURES
• Ultra Wide Input Voltage Range • RoHS Compliant
of 85~264VAC/70~400VDC
• Low Power Consumption
• High Efficiency
• Over Current and Short Circuit Protection
• Industrial Grade
• Has IEC60950, EN60950, UL60950, UL
and CE Safety Approvals
• High Power Density
DESCRIPTION
This PSLS03 series of AC/DC converters offers up to 3 watts of output power
in either a SIP model or SIP model with a 90º bend. This series consists of
single output models with an ultra-wide input voltage range of 85-264VAC.
Each model in this series has low power consumption, high efficiency and high
power density, as well as over current and short circuit protection. This series
has IEC60950, EN60950, UL60950, UL and CE safety approvals.
Size: 1.38in x 0.66in x 0.43in
(35mm x 16.85mm x 11mm)
Size: 1.38in x 0.71in x 0.43in
(35mm x 18mm x 11mm)
MODEL SELECTION TABLE
Input Voltage
Nominal Output
Voltage
Model Number(1)
Output Current Ripple & Noise Output Power Maximum Capacitive Load Efficiency
Range
PSLS03-15B03SR2S(-F)
PSLS03-15B05SR2S(-F)
PSLS03-15B09SR2S(-F)
PSLS03-15B12SR2S(-F)
PSLS03-15B15SR2S(-F)
PSLS03-15B24SR2S(-F)
3.3V
5V
9V
12V
15V
24V
500mA
500mA
333mA
250mA
200mA
125mA
70mV
70mV
50mV
50mV
50mV
50mV
1.65W
2.5W
3W
3W
3W
470uF
470uF
150uF
100uF
100uF
100uF
63%
68%
75%
77%
78%
80%
85-264VAC
(70-400VDC)
3W
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, <75% Humidity and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC Input
DC Input
85
70
47
264
400
440
0.12
0.06
VAC
VDC
Hz
Input Voltage Range
Input Frequency
Input Current
@115VAC
@230VAC
@115VAC
@230VAC
A
A
13
23
Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage
See Table
3.3V Model
5-24V Models
Full Load
±8
±5
Voltage Accuracy(2)
%
Line Regulation
Load Regulation
Output Power
±1.5
±2.5
%
%
10%-100% Load
See Table
Output Current
Min. Load
See Table
10
%
Maximum Capacitive Load
See Table
3-5V Models
9-24V Models
70
50
150
150
0.5
Ripple & Noise(3)
20MHz bandwidth (peak to peak value)
mV
Stand-By Power
W
Temperature Coefficient
PROTECTION
±0.15
%/ºC
Short Circuit Protection
Over Current Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
Continuous, Self-Recovery
≥110% Io, Self-Recovery
-40
-40
+85
+105
85
ºC
ºC
%RH
-40~20ºC
+55~85ºC
MIL-HDBK-217F@25ºC
2
1.33
300,000
Power Derating
MTBF
%/ºC
Hours
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/10/2016
Page 1 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, <75% Humidity and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
TEST CONDITIONS
Min
Typ
See Table
60
0.21oz (6g)
Max
Unit
Isolation Voltage
Input-Output, 1 minute Test Time
3000
VAC
kHz
Switching Frequency
PHYSICAL SPECIFICATIONS
Weight
1.38in x 0.66in x 0.43in
(35mm x 16.85mm x 11mm)
1.38in x 0.71in x 0.43in
(35mm x 18mm x 11mm)
Free Convection
SIP Model
Dimensions (L x W x H)
SIP Model with 90º Bend
Cooling
SAFETY CHARACTERISTICS
Safety Regulated Certification
Safety Class
IEC60950, EN60950, UL60950, UL, CE
Class II
CISPR22/EN55022
CISPR22/EN55022
CISPR22/EN55022
CISPR22/EN55022
±4kV
10V/m
±2kV
±4kV
±1kV
Class A
Class B
Class A
Class B
CE
RE
EMI
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-5
IEC/EN61000-4-8
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
EFT
Surge
±1kV/2kV
10A/m
PFM
Voltage Dips, Short Interruptions and
Voltage Variations Immunity
IEC/EN61000-4-11
0-70%
Perf. Criteria B
NOTES
1. Add -F to model name to indicate 90º corner model.
2. When working in -20-40ºC and 55-85ºC temperature range output filter capacitor C2 needs 270µF/16V solid-state capacitor.
3. Ripple & Noise are measured by “parallel cable” method.
4. External electrolytic capacitors are required to use modules.
5. This part is open frame, at least 6.4mm safety distance between the primary and secondary external components of the module is needed to meet
safety requirement.
6. In order to increase the conversion efficiency of the product with light load in the design, the product will have audio noise when it is operating, but
it will not affect the product’s reliability and performance.
7. Module requires dispensing fixed after assembly.
8. It is recommended to place the insulation sheet between the bottom of the curved legs module and the PCB board. Recommended materials for
the FR700, thickness is more than 0.4mm.
9. Product customization available.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
11/10/2016
Fax 603-778-9797
Page 2 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
DERATING CURVES
Temperature Derating Curve
Input Voltage Derating Curve
Input voltage should be derated based on temperature derating when it is 85-110VAC/240~264VAC/70~100VDC/340~400VDC
This product is suitable for use in natureal air cooling environments, if in a closed environment, please contact factory.
EFFICIENCY GRAPHS
PSLS03-15BXXSR2S(-F) AC Input
Efficiency vs. Input Voltage (Full Load)
PSLS03-15B12SR2S(-F) AC Input
Efficiency vs. Output Load
PSLS03-15BXXSR2S(-F) DC Input
Efficiency vs. Input Voltage (Full Load)
PSLS03-15B12SR2S(-F) DC Input
Efficiency vs. Output Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/10/2016
Page 3 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
MECHANICAL DRAWINGS
SIP Package
Pin-Out
Pin
1
3
5
7
Function
AC (N)
AC (L)
+V (cap)
-V (cap)
-Vo
10
12
+Vo
1. It is necessary to add C1 between pin5 and pin 7
2. It is necessary to add pi-type filter circuit to the
output, such as the typical application in Fig 1.
3. It is necessary to have distance ≥6.4mm for safety
between external components in primary circuit and
secondary circuit.
Note:
Units in mm [inch]
Pin diameter tolerances: ±0.10[±0.004]
General Tolerances: ±0.50[±0.020]
SIP Package with 90ºC Bend
Note: Grid 2.54*2.54mm
Pin-Out
Pin
1
3
5
7
Function
AC (N)
AC (L)
+V (cap)
-V (cap)
-Vo
10
12
+Vo
1. It is necessary to add C1 between pin5 and pin 7
2. It is necessary to add pi-type filter circuit to the
output, such as the typical application in Fig.1.
Note:
Units in mm [inch]
Pin diameter tolerances: ±0.10[±0.004]
General Tolerances: ±0.50[±0.020]
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
11/10/2016
Page 4 of 6
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
DESIGN REFERENCE
1. Typical Application Circuit
Note: 1 is Pi filter circuit
FUSE
C1
C2
L1
C3
Model
L2
C4
CY0
TVS
(Required) (Required)
(Required) (Required) (Required)
PSLS03-15B03SR2S(-F)
PSLS03-15B05SR2S(-F)
PSLS03-15B09SR2S(-F)
PSLS03-15B12SR2S(-F)
PSLS03-15B15SR2S(-F)
PSLS03-15B24SR2S(-F)
120µF/25V
330µF
SMBJ7.0A
SMBJ12A
1A/250V
10µF/400V
4.7mH
2.2µGH
68µF/35V
0.1µF/50V 1nF/400VAC
150µF/35V
SMBJ20A
SMBJ30A
100µF/35V
Note:
C1: AC Input, C1 is input filer capacitor (required)
DC Input is a filtering capacitor in EMC filter, the value of C1 is 10µF/400V (when input voltage is above 370VDC, and the value of
C1 is 10µF/450V). C2 and C3 are output flier capacitors (required), C2, C3 and L1 form a pi-type filter circuit, they are recommended to
be high frequency and low impedance electrolytic capacitors. Capacitance and rated ripple current of capacitors refer to the data sheets
provided by factory. Voltage derating of capacitors should 80% or above. C4 is a ceramic capacitor, which is used to filter high frequency
noise. Current of L1 and L2 refer to the data sheets provided by factory. Current rating should be 80% or above. TVS is a recommended
component to protect post-circuit (if converter fails). External input NTC model is recommended to use 13D-5. External input MOV model
is recommended to us S14K320.
2. EMC Solution-Recommended Circuit
Suggestions for safety regulation and wiring width: wire width ≥3mm, distance between wires ≥6mm, and distance between wire and ground ≥6mm, A≥6.4mm
Components
Recommended Parameter
S14K320
MOV2
CY1
CY2
CX
LCM
1nF/400VAC
1nF/400VAC
0.1µF/275VAC
3.5mH
LDM
0.33mH
NTC
13D-5
FUSE (Required)
1A/250V, Slow Fusing
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/10/2016
Page 5 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03 SERIES
3 Watts
AC/DC Converter
Single Output
Rev B
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
11/10/2016
Page 6 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
©2020 ICPDF网 联系我们和版权申明