PSLS03-16B03SS [WALL]
Cooling by Free Air Convection;
| 型号： | PSLS03-16B03SS |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | Cooling by Free Air Convection |
| 文件： | 总6页 (文件大小：743K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
FEATURES
• Ultra Wide Input Voltage Range:
90~528VAC/100~745VDC
• Compact Size
• Cooling by Free Air Convection
• Short Circuit and Over Current
Protection
• High Power Density
• Isolation Voltage: 4K VAC
• AC and DC Dual Use (Input from same
Terminal)
• Useful in Electrical and Instrumentation
Industries
• UL60950, EN60950, and FCC Part 15
Standards
DESCRIPTION
The PSLS03-16 series of AC/DC converters offers 3 watts of output power in a
compact 1.75” x 0.94” x 0.51” package. This series consists of single output models
with an ultra-wide input voltage range of 90~528VAC/100~745VDC. Each model in
this series high power density, AC and DC dual use, and short circuit and over
current protection. This series meets UL60950, EN60950, and FCC Part 15 safety
standards.
Size: 1.75in x 0.94in x 0.51in (44.50mm x 24mm x 13mm)
MODEL SELECTION TABLE
Input Voltage
Line
Regulation
Maximum
Capacitive Load
Model Number(1)
Output Voltage Output Current
Ripple & Noise Output Power
Efficiency
Range
PSLS03-16B03SS
PSLS03-16B05SS
PSLS03-16B09SS
PSLS03-16B12SS
PSLS03-16B15SS
PSLS03-16B24SS
3.3V
5V
500mA
500mA
333mA
250mA
200mA
125mA
±2.5%
±1.5%
±1.5%
±1.5%
±1.5%
±1.5%
180mV
180mV
180mV
180mV
180mV
180mV
1.65W
2.5W
3W
2200µF
1100µF
680µF
680µF
560µF
470µF
63%
67%
70%
76%
76%
76%
9V
90-528VAC
(100-745VDC)
12V
15V
24V
3W
3W
3W
SPECIFICATIONS
All specifications are based on 25°C, Typical Application Circuit, Humidity <75%, Nominal Input Voltage and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC Input
DC Input
90
100
47
528
745
63
VAC
VDC
Hz
Input Voltage Range
Input Frequency
115VAC
230VAC
480VAC
115VAC
230VAC
480VAC
0.12
0.06
0.04
Input Current
Inrush Current
A
A
9
15
27
Leakage Current
Recommended External Input Fuse
Hot Plug
0.25mA RMS typ. 230VAC/50Hz
2.0A, Slow Fusing, Necessary
Unavailable
OUTPUT SPECIFICATIONS
Output Voltage
See Table
±6
±5
3.3V Output
Others
%
%
Voltage Accuracy
Line Regulation
Load Regulation
Output Power
Output Current
Minimum Load
@Full Load
10%-100% Load
See Table
±2.5
See Table
See Table
%
%
10
Maximum Capacitive Load
See Table
Ripple & Noise(2)
20MHz bandwidth, Peak to Peak Value
230VAC Input
528VAC Input
180
mV
W
0.3
0.5
Stand-By Power Consumption
Hold-Up Time
230VAC Input
40
mS
Temperature Coefficient
±0.15
%/ºC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
5/8/2018
Page 1 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
SPECIFICATIONS
All specifications are based on 25°C, Typical Application Circuit, Humidity <75%, Nominal Input Voltage and Rated Output Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PROTECTION
Short Circuit Protection
Over Current Protection
Hiccup, Continuous, Self-Recovery
300
Self-Recovery
150
%Io
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
Work in power drop curve range
-40
-40
+85
+105
85
ºC
ºC
%RH
Wave-Soldering
Manual-Welding
+55ºC to +85ºC
-40ºC to -20ºC
260±5ºC, Time:5~10s
360±10ºC, Time: 3~5s
Welding Temperature
Power Derating
2.0
3.0
%/ºC
MTBF
MIL-HDBK-217F @25ºC
≥300,000
See Table
70
Hours
GENERAL SPECIFICATIONS
Typ. Efficiency
Isolation Voltage
Switching Frequency
PHYSICAL SPECIFICATIONS
Weight
@230VAC
Input-Output, Test Time: 1 Minute
4000
VAC
kHz
0.28oz (8.0g) Typ.
Dimensions (L x W x H)
Cooling Method
1.75in x 0.94in x 0.51in (44.50mm x 24mm x 13mm)
Free Air Convection
SAFETY CHARACTERISTICS
Safety Standards
Safety Certifications
Safety Class
IEC60950, EN60950, UL60950
IEC60950, EN60950, UL60950
Class II
Class A(3)
CISPR22/EN55022/FCC Part 15
CE
RE
CISPR22/EN55022/FCC Part 15
CISPR22/EN55022/FCC Part 15
CISPR22/EN55022/FCC Part 15
Class B(4)
EMI(4)
Class A(3)
Class B(4)
ESD
RS
IEC/EN 61000-4-2 Contact ±4kV
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
IEC/EN61000-4-3
10V/m(4)
±2kV(3)
EFT
IEC/EN61000-4-4
±4KV(4)
Line to Line ±1kV(3)
Surge
IEC/EN61000-4-5
IEC/EN61000-4-6
Line to Line ±2kV/Line to Ground ±4kV(4)
3Vr.m.s(4)
CS
Voltage Dips, Short Interruptions,
Voltage Variations Immunity
IEC/EN61000-4-11 0%, 70%(4)
Perf. Criteria B
NOTES
1. 90 degree pins are available for this series. Add “-F” to end of model number to indicate 90 degree pin package.
2. Parallel line test method is adopted to test the ripple and noise. Contact factory for more details.
3. See Fig. 1 for typical application circuit.
4. See Fig. 2 for typical application circuit.
5. This device compiles with part 15 of the FCC rules. Operation is subject to the following two conditions:
-This device may not cause harmful interference
-This device must accept any interference received, including interference that may cause undesired operation.
6. If product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the
datasheet.
7. This is an open frame part. At least 10mm safety distance between primary and secondary external components of the module is needed to meet
the safety requirement.
8. In order to increase the conversion efficiency of the input with light load in the design, the product will have audio noise when it is operating, but it
does not affect the product’s reliability and performance.
9. Module requires dispensing fixed after assembled.
10. Customization services available
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
5/8/2018
Fax 603-778-9797
Page 2 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
CHARACTERISTIC CURVES
Temperature Derating Curve
Temperature Derating Curve
Input Voltage Derating Curve
Note:
1. When input 90~110VAC/480~528VAC/100~155VDC/675~745VDC, it needs to be voltage derated on basis of temperature derating
Refer to typical application circuit.
2. If the product is working at full load at ambient temperature of -40ºC to -20ºC. See Fig. 2 for typical application circuit.
3. This product is suitable for use in natural air cooling environments. If in a closed environment, please contact factory.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
5/8/2018
Fax 603-778-9797
Page 3 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
APPLICATION CIRCUITS
1. Typical Application Circuit
Part No.
MOV1
C1/C2*
L2
R1/R2*
C3*
L1*
C4*
C5
CY1
FUSE*
2.0A
NTC*
5D-9
R3*
TVS
PSLS03-16B03SS
PSLS03-16B05SS
PSLS03-16B09SS
PSLS03-16B12SS
PSLS03-16B15SS
PSLS03-16B24SS
SMBJ7.0A
SMBJ7.0A
SMBJ12A
SMBJ20A
SMBJ20A
SMBJ30A
270µF/16V
(Solid Capacitor)
100µF/
35V
0.1µF/
50V
470pF/
500VAC
7.5Ω/
1W
S14K550
22µF/450V
1.2mH
3MΩ
4.7µH
470µF/35V
*Necessary
Note:
1. C1/C2: filtering electrolytic capacitor (which is required), recommended the same brand, the same model, the same batch of electrolytic capacitors;
Such as the use of -25 C to +85 C environment, can use the recommended value of 10uF/450V capacitor;
2. R1/R2: max operation voltage of R1/R2 should be above 450V. While using chip resistors, it is recommended to use several chip resistors in series to
meet operation voltage;
3. R3(which is required): winding resistance;
4. C3 and C4 are output filer capacitors (which is required), they are recommended to be high frequency and low impedance electrolytic capacitors.
Capacitance and rated ripple current of capacitors refer to the datasheets provided by the manufactures. Capacitor voltage reduced to at least 80%. C5 is
a ceramic capacitor, which is used to filter high frequency noise. C3, C4 and L1 form a pi-type filter circuit. Current of L1 and L2 refer to the datasheets
provided by the manufactures, current derating to at least 80%. TVS is a recommended component to protect post-circuits (If converter fails);
5. When working at full load at ambient temperature of -40℃ to -20℃, following circuit parameters values are recommended: C1/C2 (necessary):
33µF/450V; R1/R2 (necessary): 1 MΩ; R3(necessary): 12Ω/2W; NTC(necessary): 10D-10.
3. EMC Solution-Recommended Circuit
Element Model
MOV1
MOV2, MOV3
CY2, CY3
CX
Recommended Value
S14K550
S07K300
470pF/500VAC
0.1µF/530VAC
4.5mH
LCM
L2
1.2mH
NTC
10D-10
R3
12Ω/3W
FUSE
2.0A, Slow Fusing, Necessary
*Note: the recommended value of other components refers to typ. application circuit
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
5/8/2018
Page 4 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
MECHANICAL DRAWINGS
Standard
Pin-Out
Pin
1
3
5
7
Function
AC(N)
AC(L)
+V(cap)
-V(cap)
-Vo
14
16
+Vo
Note:
Unit: mm [inch]
1. It is necessary to add C1, C2, and R1, R2 between pin 5
and pin 7
2. It is necessary to ad pi-type filter circuit to the output,
such as the typical application of Figure 1.
Pin section tolerances: ±0.10 [±0.004]
General Tolerances: ±0.50 [±0.020]
The layout of this device is for reference only, please refer to actual product.
90 Degree Pins (“-F” Suffix)
Note: Grid 2.54*2.54mm
Pin Out
Pin
1
3
5
7
Function
AC(N)
AC(L)
+V(cap)
-V(cap)
-Vo
14
16
+Vo
Note:
Unit: mm [inch]
1. It is necessary to add C1, C2, and R1, R2 between pin5
and pin 7
2. It is necessary to add pi-type filter circuit to the output,
such as the typical application circuit in Figure 1.
Pin section tolerances: ±0.10 [±0.004]
General tolerances: ±0.50 [±0.020]
The layout of the devices is for reference only, please refer to actual product.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5/8/2018
Page 5 of 6
PSLS03-16 SERIES
3 Watts
Rev B
Single Output
AC/DC Converter
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
5/8/2018
Page 6 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明