SIHFP240 [VISHAY]
Power MOSFET; 功率MOSFET
| 型号： | SIHFP240 |
| 厂家： | 
VISHAY |
| 描述： | Power MOSFET |
| 文件： | 总8页 (文件大小：1603K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IRFP240, SiHFP240
Vishay Siliconix
Power MOSFET
FEATURES
• Dynamic dV/dt Rating
PRODUCT SUMMARY
VDS (V)
200
• Repetitive Avalanche Rated
• Isolated Central Mounting Hole
• Fast Switching
Available
RDS(on) (Ω)
VGS = 10 V
0.18
RoHS*
Qg (Max.) (nC)
70
13
COMPLIANT
Q
Q
gs (nC)
gd (nC)
• Ease of Paralleling
39
• Simple Drive Requirements
• Lead (Pb)-free Available
Configuration
Single
D
DESCRIPTION
TO-247
Third generation Power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and
cost-effectiveness.
G
The TO-247 package is preferred for commercial-industrial
applications where higher power levels preclude the use of
TO-220 devices. The TO-247 is similar but superior to the
earlier TO-218 package because its isolated mounting hole.
It also provides greater creepage distances between pins to
meet the requirements of most safety specifications.
S
D
G
S
N-Channel MOSFET
ORDERING INFORMATION
Package
TO-247
IRFP240PbF
SiHFP240-E3
IRFP240
Lead (Pb)-free
SnPb
SiHFP240
ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted
PARAMETER
SYMBOL
LIMIT
UNIT
Drain-Source Voltage
Gate-Source Voltage
VDS
VGS
200
V
20
T
C = 25 °C
20
Continuous Drain Current
VGS at 10 V
ID
TC = 100 °C
12
A
Pulsed Drain Currenta
IDM
80
Linear Derating Factor
1.2
W/°C
mJ
A
Single Pulse Avalanche Energyb
Repetitive Avalanche Currenta
Repetitive Avalanche Energya
EAS
IAR
510
20
EAR
15
150
mJ
W
Maximum Power Dissipation
TC = 25 °C
PD
Peak Diode Recovery dV/dtc
dV/dt
TJ, Tstg
5.0
V/ns
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
- 55 to + 150
300d
°C
for 10 s
10
lbf · in
N · m
Mounting Torque
6-32 or M3 screw
1.1
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. VDD = 50 V, starting TJ = 25 °C, L = 1.9 mH, RG = 25 Ω, IAS = 20 A (see fig. 12).
c. ISD ≤ 18 A, dI/dt ≤ 150 A/µs, VDD ≤ VDS, TJ ≤ 150 °C.
d. 1.6 mm from case.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
www.vishay.com
1
WORK-IN-PROGRESS
IRFP240, SiHFP240
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYP.
MAX.
40
UNIT
Maximum Junction-to-Ambient
Case-to-Sink, Flat, Greased Surface
Maximum Junction-to-Case (Drain)
RthJA
RthCS
RthJC
-
0.24
-
-
°C/W
0.83
SPECIFICATIONS TJ = 25 °C, unless otherwise noted
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Static
Drain-Source Breakdown Voltage
VDS Temperature Coefficient
Gate-Source Threshold Voltage
Gate-Source Leakage
VDS
ΔVDS/TJ
VGS(th)
IGSS
VGS = 0 V, ID = 250 µA
Reference to 25 °C, ID = 1 mA
VDS = VGS, ID = 250 µA
200
-
-
-
V
V/°C
V
-
0.29
2.0
-
-
-
-
-
-
4.0
100
25
250
0.18
-
VGS
VDS = 200 V, VGS = 0 V
DS = 160 V, VGS = 0 V, TJ = 125 °C
VGS = 10 V
ID = 12 Ab
VDS = 50 V, ID = 12 Ab
=
20 V
-
nA
-
-
Zero Gate Voltage Drain Current
IDSS
µA
V
Drain-Source On-State Resistance
Forward Transconductance
Dynamic
RDS(on)
gfs
-
Ω
6.9
S
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Ciss
Coss
Crss
Qg
-
-
-
-
-
-
-
-
-
-
1300
400
130
-
-
-
VGS = 0 V,
V
DS = 25 V,
pF
f = 1.0 MHz, see fig. 5
-
70
13
39
-
ID = 18 A, VDS = 160 V,
see fig. 6 and 13b
Qgs
Qgd
td(on)
tr
VGS = 10 V
-
nC
-
14
51
45
36
-
V
R
DD = 100 V, ID = 18 A,
G = 9.1 Ω, RD = 5.4 Ω,
see fig. 10b
ns
Turn-Off Delay Time
Fall Time
td(off)
tf
-
-
D
Between lead,
Internal Drain Inductance
LD
LS
-
-
5.0
13
-
-
6 mm (0.25") from
package and center of
die contact
nH
G
Internal Source Inductance
S
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current
MOSFET symbol
showing the
integral reverse
p - n junction diode
D
IS
-
-
-
-
20
80
A
G
Pulsed Diode Forward Currenta
ISM
S
Body Diode Voltage
VSD
trr
TJ = 25 °C, IS = 20 A, VGS = 0 Vb
-
-
-
-
2.0
610
7.1
V
Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge
Forward Turn-On Time
300
3.4
ns
µC
TJ = 25 °C, IF = 18 A, dI/dt = 100 A/µsb
Qrr
ton
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. Pulse width ≤ 300 µs; duty cycle ≤ 2 %.
www.vishay.com
2
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
IRFP240, SiHFP240
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
Fig. 1 - Typical Output Characteristics, TC = 25 °C
Fig. 3 - Typical Transfer Characteristics
Fig. 4 - Normalized On-Resistance vs. Temperature
Fig. 2 - Typical Output Characteristics, TC = 150 °C
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
www.vishay.com
3
IRFP240, SiHFP240
Vishay Siliconix
Fig. 5 - Typical Capacitance vs. Drain-to-Source
Voltage
Fig. 7 - Typical Source-Drain Diode Forward Voltage
Fig. 8 - Maximum Safe Operating Area
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage
www.vishay.com
4
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
IRFP240, SiHFP240
Vishay Siliconix
RD
VDS
VGS
D.U.T.
RG
+
V
-
DD
10 V
Pulse width ≤ 1 µs
Duty factor ≤ 0.1 %
Fig. 10a - Switching Time Test Circuit
VDS
90 %
10 %
VGS
td(on) tr
td(off) tf
Fig. 9 - Maximum Drain Current vs. Case Temperature
Fig. 10b - Switching Time Waveforms
Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
www.vishay.com
5
IRFP240, SiHFP240
Vishay Siliconix
L
VDS
VDS
Vary tp to obtain
required IAS
tp
VDD
D.U.T
IAS
RG
+
-
VDD
VDS
10 V
0.01 Ω
tp
IAS
Fig. 12a - Unclamped Inductive Test Circuit
Fig. 12b - Unclamped Inductive Waveforms
Fig. 12c - Maximum Avalanche Energy vs. Drain Current
Current regulator
Same type as D.U.T.
50 kΩ
QG
10 V
12 V
0.2 µF
0.3 µF
QGS
QGD
+
-
VDS
D.U.T.
VG
VGS
3 mA
Charge
IG
ID
Current sampling resistors
Fig. 13b - Gate Charge Test Circuit
Fig. 13a - Basic Gate Charge Waveform
www.vishay.com
6
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
IRFP240, SiHFP240
Vishay Siliconix
Peak Diode Recovery dV/dt Test Circuit
+
Circuit layout considerations
• Low stray inductance
• Ground plane
D.U.T.
• Low leakage inductance
current transformer
-
+
-
-
+
RG
• dV/dt controlled by RG
+
-
• Driver same type as D.U.T.
• ISD controlled by duty factor "D"
• D.U.T. - device under test
VDD
Driver gate drive
P.W.
P.W.
Period
Period
D =
V
= 10 V*
GS
D.U.T. I waveform
SD
Reverse
recovery
current
Body diode forward
current
dI/dt
D.U.T. V waveform
DS
Diode recovery
dV/dt
V
DD
Re-applied
voltage
Body diode forward drop
Ripple ≤ 5 %
Inductor current
I
SD
* VGS = 5 V for logic level devices
Fig. 14 - For N-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see http://www.vishay.com/ppg?91210.
Document Number: 91210
S-Pending-Rev. A, 24-Jun-08
www.vishay.com
7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明