ESH1DHE3_A/H [VISHAY]
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, DO-214AC, SMA, 2 PIN;型号: | ESH1DHE3_A/H |
厂家: | VISHAY |
描述: | Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, DO-214AC, SMA, 2 PIN 瞄准线 光电二极管 |
文件: | 总5页 (文件大小:88K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ESH1B, ESH1C, ESH1D
Vishay General Semiconductor
www.vishay.com
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated pellet chip junction
• Ultrafast recovery times for high efficiency
• Low forward voltage, low power loss
Available
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
SMA (DO-214AC)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for
ultrafast switching speeds AC/AC and DC/DC converters in
high temperature conditions for both consumer and
automotive applications.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
MECHANICAL DATA
VRRM
trr
100 V, 150 V, 200 V
25 ns
Case: SMA (DO-214AC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
VF at IF
0.90 V
TJ max.
175 °C
Package
Diode variations
SMA (DO-214AC)
Single
(“_X” denotes revision code e.g. A, B, .....)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
ESH1B
EHB
100
ESH1C
EHC
150
ESH1D
EHD
200
UNIT
Device marking code
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
V
V
V
A
70
105
140
Maximum DC blocking voltage
Maximum average forward rectified current at TL = 150 °C
100
150
200
IF(AV)
1.0
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC® method)
IFSM
50
A
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
°C
Revision: 21-Jul-17
Document Number: 88890
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ESH1B, ESH1C, ESH1D
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
VALUE
0.87
0.90
1.0
25
UNIT
(1)
IF = 0.7 A
IF = 1 A
VF
Maximum instantaneous forward voltage
V
VF
IR
TA = 25 °C
Maximum DC reverse current at rated DC
blocking voltage
μA
TA = 125 °C
Maximum reverse current
VR = 20 V, TJ = 150 °C
IR
trr
50
μA
ns
Maximum reverse recovery time
IF = 0.5 A, IR = 1 A, Irr = 0.25 A
25
TJ = 25 °C
TJ = 100 °C
TJ = 25 °C
TJ = 100 °C
25
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
Typical reverse recovery time
trr
ns
35
10
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
Typical stored charge
Qrr
CJ
nC
pF
15
Typical junction capacitance
4.0 V, 1 MHz
25
Note
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
ESH1B
ESH1C
85
ESH1D
UNIT
(1)
RθJA
Typical thermal resistance
°C/W
(1)
RθJL
30
Note
(1)
Units mounted on PCB with 5.0 mm x 5.0 mm (0.013 mm thick) land areas
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
ESH1D-E3/61T
0.064
61T
5AT
H
1800
7500
1800
7500
1800
7500
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
ESH1D-E3/5AT
0.064
ESH1DHE3_A/H (1)
ESH1DHE3_A/I (1)
ESH1D-M3/61T
ESH1D-M3/5AT
ESH1DHM3_A/H (1)
ESH1DHM3_A/I (1)
0.064
0.064
I
0.064
61T
5AT
H
0.064
0.064
0.064
I
Note
(1)
AEC-Q101 qualified
Revision: 21-Jul-17
Document Number: 88890
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ESH1B, ESH1C, ESH1D
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
1.2
1.0
0.8
0.6
0.4
0.2
0
100
10
TJ = 125 °C
TJ = 150 °C
TJ = 175 °C
1
TJ = 25 °C
TL Measured
at the Cathode Band Terminal
0.1
0.01
95
105
115
125
135
145
155
165
175
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Lead Temperature (°C)
Instantaneous Forward Voltage (V)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Instantaneous Forward Characteristics
50
100
40
30
20
10
0
10
1
1
10
100
0.1
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
100
100
10
1
TJ = 175 °C
TJ = 150 °C
10
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 25 °C
0.01
0.001
20
40
60
80
100
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 3 - Typical Reverse Leakage Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 21-Jul-17
Document Number: 88890
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ESH1B, ESH1C, ESH1D
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMA (DO-214AC)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 21-Jul-17
Document Number: 88890
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
ESH1PB-E3/84A
Rectifier Diode, 1 Element, 1A, 100V V(RRM), Silicon, DO-220AA, ROHS COMPLIANT, PLASTIC, SMP, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明