BAS16WS-V [VISHAY]
Small Signal Fast Switching Diode; 小信号的快速开关二极管
| 型号： | BAS16WS-V |
| 厂家： | 
VISHAY |
| 描述： | Small Signal Fast Switching Diode |
| 文件： | 总5页 (文件大小：136K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BAS16WS-V
Vishay Semiconductors
Small Signal Fast Switching Diode
Features
• Silicon epitaxial planar diode
• Fast switching diode
e3
• Also available in case SOT23 with
designation BAS16
• Lead (Pb)-free component
20145
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Mechanical Data
Case: SOD323 plastic case
Weight: approx. 4.3 mg
Packaging codes/options:
GS18/10 k per 13" reel (8 mm tape), 10 k/box
GS08/3 k per 7" reel (8 mm tape), 15 k/box
Parts Table
Part
Ordering code
Marking
A6
Remarks
BAS16WS-V
BAS16WS-V-GS18 or BAS16WS-V-GS08
Tape and Reel
Absolute Maximum Ratings
T
= 25 °C, unless otherwise specified
amb
Parameter
Test condition
Symbol
VR
Value
75
Unit
V
Reverse voltage
VRM
IF
Peak reverse voltage
Forward current (continuous)
100
250
2.0
V
mA
A
IFSM
IFSM
IFSM
Ptot
t = 1 µs
t = 1 ms
t = 1 s
Non-repetitive peak forward
current
1.0
A
0.5
A
Power dissipation
200
mW
Thermal Characteristics
T
= 25 °C, unless otherwise specified
amb
Parameter
Test condition
Symbol
RthJA
Value
650
Unit
K/W
°C
Thermal resistance junction to ambient air
Maximum junction temperature
Storage temperature
Tj
150
Tstg
- 65 to + 150
°C
Document Number 85752
Rev. 1.7, 30-Apr-08
www.vishay.com
For technical support, please contact: Diodes-SSP@vishay.com
1
BAS16WS-V
Vishay Semiconductors
Electrical Characteristics
T
= 25 °C, unless otherwise specified
amb
Parameter
Test condition
Symbol
VF
Min.
Typ.
Max.
715
855
1000
1250
30
Unit
mV
mV
mV
mV
µA
IF = 1 mA
IF = 10 mA
VF
VF
VF
IR
Forward voltage
Leakage current
IF = 50 mA
IF = 150 mA
VR = 25 V, TJ = 150 °C
VR = 75 V
IR
1
µA
VR = 75 V, TJ = 150 °C
VR = 0; f = 1 MHz
IR
50
µA
CD
Diode capacitance
2
pF
IF = 10 mA to IR = 10 mA,
trr
Reverse recovery time
6
ns
IR = 1 mA, RL = 100 Ω
Typical Characteristics
T
= 25 °C, unless otherwise specified
amb
103
500
400
300
102
10
Tj = 100 °C
Tj = 25 °C
200
100
0
1
10- 1
10- 2
0
1
2
0
100
Tamb (°C)
200
18185
18105
VF (V)
Figure 1. Forward Characteristics
Figure 3. Admissible Power Dissipation vs. Ambient Temperature
104
5
Tj = 25 °C
f = 1 kHz
Tj = 25 °C
1.1
f = 1 MHz
2
103
1.0
5
2
102
5
0.9
0.8
0.7
2
10
5
2
10-2
10-1
1
10
102
0
2
4
6
8
10
17440
17438
VR (V)
IF (mA)
Figure 2. Dynamic Forward Resistance vs. Forward Current
Figure 4. Relative Capacitance vs. Reverse Voltage
www.vishay.com
2
Document Number 85752
Rev. 1.7, 30-Apr-08
For technical support, please contact: Diodes-SSP@vishay.com
BAS16WS-V
Vishay Semiconductors
104
5
2
103
5
2
102
5
2
10
5
VR = 20 V
2
1
0
100
Tj (°C)
200
17441
Figure 5. Leakage Current vs. Junction Temperature
Package Dimensions in millimeters (inches): SOD323
17443
Document Number 85752
Rev. 1.7, 30-Apr-08
www.vishay.com
3
For technical support, please contact: Diodes-SSP@vishay.com
BAS16WS-V
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as
their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA.
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com
4
Document Number 85752
Rev. 1.7, 30-Apr-08
For technical support, please contact: Diodes-SSP@vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
BAS16WT-TP
Rectifier Diode, 1 Element, 0.15A, 75V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-3
MCC
©2020 ICPDF网 联系我们和版权申明