UT213L-R28-R [UTC]

Line Driver/Receiver,;
UT213L-R28-R
型号: UT213L-R28-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

Line Driver/Receiver,

文件: 总8页 (文件大小:313K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
UT213  
CMOS IC  
+5.0V POWER SUPPLY, 120KBPS,  
MULTICHANNAEL RS-232 LINE  
DRIVERS/RECEIVERS  
SOP-28  
DESCRIPTION  
The UTC UT213 consists of 4 drivers and 5 receivers. It meets  
ElA/TIA-232 and V.28/V.24 specifications, it intended for notebook  
computer applications. A high-efficiency, dual charge-pumps power supply  
and a low-dropout transmitter combine to deliver true RS-232 performance  
from a single +4.5V~+5.5V power supply. A guaranteed data rate of  
120kbps provides compatibility with popular software for communicating  
with PCs.  
SSOP-28  
The UTC UT213 has an active-low shutdown and an active-high  
receiver enable control.  
FEATURES  
* Operates With 4.5V~5.5V Power Supply  
* Four Drivers and Five Receivers  
* Designed to Transmit at a Data Rate of 120 kbps  
* Low Standby Current (15µA Typical)  
* Serial-Mouse Drivability  
* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins  
ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Lead Free  
Halogen Free  
UT213L-S28-R  
UT213L-R28-R  
UT213G-S28-R  
UT213G-R28-R  
SOP-28  
Tape Reel  
Tape Reel  
SSOP-28  
UT213G-S28-R  
(1) R: Tape Reel  
(2) S28: SOP-28, R28: SSOP-28  
(3) G: Halogen Free and Lead Free, L: Lead Free  
(1)Packing Type  
(2)Package Type  
(3)Green Package  
MARKING  
23  
15  
16  
17  
24  
25  
22 21 20 19 18  
28 27  
26  
Date Code  
UTC  
U T 2 1  
L: Lead Free  
G: Halogen Free  
3
Lot Code  
1
2
4
6
7
8
9
10  
12 13 14  
11  
3
5
www.unisonic.com.tw  
Copyright © 2020 Unisonic Technologies Co., Ltd  
1 of 8  
QW-R103-144.D  
UT213  
CMOS IC  
PIN CONFIGURATION  
T3OUT  
T1OUT  
T2OUT  
1
2
28  
27  
26  
T4OUT  
R3IN  
3
R3OUT  
4
R2IN  
R2OUT  
T2IN  
25 SHDN  
24 EN  
5
6
23  
22  
21  
20  
R4IN  
T1IN  
7
R4OUT  
T4IN  
UTC  
UT213  
R1OUT  
R1IN  
8
9
T3IN  
10  
11  
12  
13  
14  
GND  
VCC  
C1+  
V+  
19 R5OUT  
R5IN  
V-  
18  
17  
16  
15  
C2-  
C2+  
C1-  
PIN DESCRIPTION  
PIN NO.  
1, 2, 3, 28  
4, 9, 27  
5, 8, 26  
6, 7, 20, 21  
10  
PIN NAME  
TXOUT  
DESCRIPTION  
RS-232 Transmitter Outputs  
RS-232 Receiver Inputs  
TTL/CMOS Receiver Outputs  
TTL/CMOS Transmitter Inputs  
Ground  
R1IN ~ R3IN  
R1OUT ~ R3OUT  
TXIN  
GND  
11  
VCC  
+4.5V ~ +5.5V Supply Voltage  
12  
C1+  
Positive terminal of the voltage doubler charge-pump capacitor  
+5.5V generated by the charge pump  
13  
V+  
14  
C1-  
Negative terminal of the voltage doubler charge-pump capacitor  
Positive terminal of inverting charge-pump capacitor  
Negative terminal of inverting charge-pump capacitor  
-5.5V generated by the charge pump  
15  
C2+  
16  
C2-  
17  
V-  
18, 23  
19, 22  
24  
R4IN ~ R5IN  
R4OUT ~ R5OUT  
EN  
RS-232 Receiver Inputs (Active in shutdown)  
TTL/CMOS Receiver Outputs (Active in shutdown)  
Active high enable control  
25  
Active low shutdown control  
SHDN  
UNISONICTECHNOLOGIESCO.,LTD  
2 of 8  
QW-R103-144.D  
www.unisonic.com.tw  
UT213  
CMOS IC  
BLOCK DIAGRAM  
VCC  
400kΩ  
VCC  
400kΩ  
VCC  
400kΩ  
VCC  
400kΩ  
T1IN  
T2IN  
T3IN  
T4IN  
T1OUT  
T2OUT  
T3OUT  
T4OUT  
T1  
T2  
T3  
T4  
SHDN  
EN  
SHUTDOWN  
R1OUT  
R2OUT  
R3OUT  
R4OUT  
R5OUT  
R1IN  
R2IN  
R2IN  
R4IN  
R5IN  
R1  
R2  
R3  
R4  
R5  
5kΩ  
5kΩ  
5kΩ  
5kΩ  
5kΩ  
UNISONICTECHNOLOGIESCO.,LTD  
3 of 8  
QW-R103-144.D  
www.unisonic.com.tw  
UT213  
CMOS IC  
ABSOLUTE MAXIMUM RATING  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
+6.0  
UNIT  
VCC  
V
V
V
V
V+ (Note 2)  
V- (Note 2)  
V+ +|V-| (Note 2)  
V+  
+7.0  
V-  
-7.0  
VPUMP  
+13  
-0.3 ~ +6.0  
V
T_IN, SHDN, EN  
Input Voltages  
VIN  
R_IN  
±25  
±13.2  
V
V
V
T_OUT  
R_OUT,  
T_OUT  
Output Voltages  
VOUT  
-0.3 ~ (VCC+0.3)  
Continuous  
870  
Short-Circuit Duration  
Power Dissipation(TA=25°C)  
Operating Temperature  
Storage Temperature  
SC  
PD  
mW  
°C  
TOPR  
TSTG  
-40 ~ +85  
-65 ~ +150  
°C  
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
2. V+ and V- can have maximum magnitudes of 7.0V, but their absolute difference cannot exceed 13V.  
ELECTRICAL CHARACTERISTICS  
(VCC=+5V, C1~C4=0.1µF, TA = TMIN to TMAX, unless otherwise specified)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN TYP MAX UNIT  
DC CHARACTERISTICS  
Supply Current, Shutdown  
ISHDN  
ICC  
15  
11  
50  
20  
µA  
SHDN=0V, EN=0V or VCC  
SHDN=VCC, EN=0V or VCC  
TA= 25°C  
VCC Supply Current  
mA  
LOGIC INPUTS  
Low  
Input Logic Threshold  
High  
VLGL  
0.8  
V
T_IN, SHDN, EN  
VLGH  
IPullup  
2.4  
3.5  
V
T_IN, SHDN, EN, VCC=5V  
T_IN=0V  
Logic Pullup Current  
RECEIVER OUTPUTS  
Output Leakage Current  
15  
200  
µA  
EN=0V,0VROUTVCC  
IROUT(LK)  
0.05 ±10  
0.4  
µA  
V
Low  
Output Voltage  
High  
VROUTL IOUT = 1.6mA  
VROUTH IOUT = -1.0mA  
V
RECEIVER INPUTS  
Input Voltage Range  
VRR  
-30  
0.8  
30  
V
V
Active mode  
Shutdown mode  
R4, R5  
1.2  
Input Threshold Low  
Input Threshold High  
VRINL  
TA=25°C  
TA=25°C  
0.6  
1.5  
Active mode  
Shutdown mode  
R4, R5  
1.7  
1.5  
2.4  
2.4  
VRINH  
V
Input Hysteresis  
VRINHYS no Hysteresis in shutdown  
VRINRES TA=25°C  
0.2  
3
0.5  
5
1.0  
7
V
Input Resistance  
kΩ  
TRANSMITTER OUTPUTS  
All transmitter outputs loaded with 3kΩ to  
ground  
Output Voltage Swing  
VTOUTSW  
±5.0 ±5.4  
300 10M  
V
VCC= V+=V-=0V,  
Transmitter output=±2V  
Output Resistance  
VTOUTRES  
ITSC  
Output Short-Circuit Current  
Output Leakage Current  
±10 ±60 mA  
±25 µA  
VCC=5.0V, VOUT=±12V,  
Transmitters disabled  
ITOUT(L)  
UNISONICTECHNOLOGIESCO.,LTD  
4 of 8  
QW-R103-144.D  
www.unisonic.com.tw  
UT213  
CMOS IC  
ELECTRICAL CHARACTERISTICS (Cont.)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN TYP MAX UNIT  
TIMING CHARACTERISTICS  
RL=3kΩ to 7kΩ  
Maximum Data Rate  
DR  
CL=50pf to 1000pF  
one transmitter switching  
120  
kbps  
µs  
TDR1  
TDR2  
4
40  
10  
SHDN=0V, R4,R5  
SHDN=VCC  
Receiver Propagation Delay  
0.5  
Enable  
Receiver Output Time  
Disable  
tR(EN)  
tR(DIS)  
tTS  
600  
200  
300  
ns  
ns  
ns  
Normal operation  
Transmitter Skew  
|tPHL tPLH|  
TA=25°C,  
RL=3kΩ~7kΩ,  
measured from +3V ~  
-3V or -3V~+3V  
Transition-Region Slew Rate  
SR  
CL=50pF~2500pF  
15  
V/µs  
Note: Typical values are at TA=25°C.  
UNISONICTECHNOLOGIESCO.,LTD  
www.unisonic.com.tw  
5 of 8  
QW-R103-144.D  
UT213  
CMOS IC  
DETAILED DESCRIPTION  
Charge-Pump Voltage Converter  
The UTC UT213 consists of a regulated dual charge pumps that provide output voltages of +5.5V and -5.5V,  
regardless of the input voltage (VCC) changing from +4.5V to +5.5V.  
The charge pumps operate in a discontinuous mode: if the output voltages are less than 5.5V, the charge pumps  
are enabled; if the output voltages exceed 5.5V, the charge pumps are disabled.  
Each charge pump requires a flying capacitor (C1, C2) and a reservoir capacitor (C3, C4) to generate the V+ and  
V- supplies, refer to application circuit.  
RS-232 Transmitters  
UTC UT213’s transmitters are inverting level translators that convert CMOS-logic levels to 5.0V EIA/TIA-232 levels.  
They guarantee a 120kbps data rate when VCC=5V with worst-case loads of 3kΩ in parallel with 1000pF, providing  
compatibility with PC-to-PC communication software.  
Input thresholds are both CMOS and TTL compatible. The inputs of unused drivers can be left unconnected since  
400kΩ pullup resistors to VCC are included on-chip. Since all drivers invert, the pullup resistors force the outputs of  
unused drivers low. The input pullup resistors typically source 15μA; therefore, the driver inputs should be driven  
high or open circuited to minimize power-supply current in shutdown mode.  
RS-232 Receivers  
The UTC UT213’s receivers convert RS-232 signals to CMOS logic output levels. Receiver outputs are inverting,  
maintaining compatibility with driver outputs. The guaranteed receiver input thresholds of +0.8V and +2.4V are  
significantly tighter than the Q3.0V threshold required by the EIA/TIA-232E specification. This allows receiver inputs  
to respond to TTL/CMOS logic levels and improves noise margin for RS-232 levels.  
Receiver inputs have approximately +0.5V hysteresis. This provides clean output transitions, even with slow rise  
and fall time input signals with moderate amounts of noise and ringing. In shutdown, the UTC UT213’s receivers R4  
and R5 have no hysteresis.  
During normal operation, the UTC UT213’s receiver propagation delay is typically 1us. When entering shutdown  
with receivers active, R4 and R5 are not valid until 80Fs after SHDN is driven low. In shutdown mode, propagation  
delays increase to 4us for a high-to-low or a low-to-high transition.  
Shutdown Function  
In shutdown mode, the UTC UT213’s charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to  
ground, and the transmitter outputs are disabled. This reduces supply current typically to 15μA. The time required to  
exit shutdown is 1ms, All receivers except R4 and R5 on the UTC UT213 are put into a high-impedance state in  
shutdown mode. The UTC UT213’s R4 and R5 receivers still function in shutdown mode. These two receivers are  
useful for monitoring external activity while maintaining minimal power consumption.  
The enable control is used to put the receiver outputs into a high-impedance state, so that the receivers can be  
connected directly to a three-state bus. It has no effect on the RS-232 drivers or on the charge pumps.  
Table 1. Shutdown Logic Control Truth Table  
EN  
OPERATION STATUS  
Shutdown  
TRANSMITTERS T1T4  
R1, R2, R3  
R4, R5  
SHDN  
0
0
1
1
0
1
0
1
High-Z  
High-Z  
Active  
Active  
High-Z  
High-Z  
High-Z  
Active  
High-Z  
Active*  
High-Z  
Active  
Shutdown  
Normal operation  
Normal operation  
* Active with reduced performance.  
UNISONICTECHNOLOGIESCO.,LTD  
www.unisonic.com.tw  
6 of 8  
QW-R103-144.D  
UT213  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
5V  
CBYPASS  
VCC  
C1+  
V+  
V-  
C1  
C3  
C4  
C1-  
C2+  
UTC  
UT213  
C2  
C2-  
VCC  
VCC  
VCC  
VCC  
400kΩ  
400kΩ  
400kΩ  
400kΩ  
T1IN  
T2IN  
T3IN  
T4IN  
T1OUT  
T2OUT  
T3OUT  
T4OUT  
T1  
T2  
T3  
T4  
SHDN  
SHUTDOWN  
EN  
R1  
R2  
R3  
R4  
R5  
R1OUT  
R2OUT  
R3OUT  
R4OUT  
R5OUT  
R1IN  
R2IN  
R2IN  
R4IN  
R5IN  
5kΩ  
5kΩ  
5kΩ  
5kΩ  
5kΩ  
GND  
Table 2. Required Capacitor Value  
VCC (V)  
4.5~5.5  
C1, C2, C3, C4 (µF)  
0.1  
CBYPASS (µF)  
0.047  
UNISONICTECHNOLOGIESCO.,LTD  
7 of 8  
QW-R103-144.D  
www.unisonic.com.tw  
UT213  
CMOS IC  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to  
make changes to information published in this document, including without limitation specifications and  
product descriptions, at any time and without notice. This document supersedes and replaces all  
information supplied prior to the publication hereof.  
UNISONICTECHNOLOGIESCO.,LTD  
8 of 8  
QW-R103-144.D  
www.unisonic.com.tw  

相关型号:

UT213L-S28-R

Line Driver/Receiver,
UTC
MARKTECH
MARKTECH

UT2274

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274G-T60-K

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274G-T92-B

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274G-T92-K

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274G-TM3-T

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274L-T60-K

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274L-T92-B

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274L-T92-K

SWITCHING REGULATOR APPLICATIONS
UTC

UT2274L-TM3-T

SWITCHING REGULATOR APPLICATIONS
UTC