U74AC32 [UTC]
QUADRUPLE 2-INPUT POSITIVE-OR GATE;型号: | U74AC32 |
厂家: | Unisonic Technologies |
描述: | QUADRUPLE 2-INPUT POSITIVE-OR GATE 输入元件 |
文件: | 总5页 (文件大小:169K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
U74AC32
CMOS IC
QUADRUPLE 2-INPUT
POSITIVE-OR GATE
DESCRIPTION
The U74AC32 is a quad 2-input positive-OR gate. The device
performs the Boolean function Y=A+B or Y A B in positive
logic.
SOP-14
FEATURES
* Operation Voltage Range: 2~6V
* Inputs Accept Voltages to 6V
* Max tpd of 7.5 ns at 5V
ORDERING INFORMATION
Ordering Number
Lead Free
Package
SOP-14
Packing
Halogen Free
U74AC32L-S14-R
U74AC32G-S14-R
Tape Reel
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-988.A
U74AC32
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE(EACH GATE)
INPUTS
OUTPUT
A
H
X
L
B
X
H
L
Y
H
H
L
L: low voltage level; H: high voltage level; X: don’t care
LOGIC DIAGRAM,EACH GATE (POSITIVE LOGIC)
UNISONIC TECHNOLOGIES CO., LTD
2 of 5
QW-R502-988.A
www.unisonic.com.tw
U74AC32
CMOS IC
ABSOLUTE MAXIMUM RATING (unless otherwise specified) (Note 2)
PARAMETER
SYMBOL
VCC
RATINGS
-0.5~7.0
-0.5~Vcc+0.5
-0.5~VCC+0.5
±20
UNIT
V
Supply Voltage
Input Voltage
VIN
V
Output Voltage
VOUT
IIK
V
Input Clamp Current (VI<0 or VI>VCC
Output Clamp Current (VO<0 or VO>VCC
Output Current(VO=0 to VCC
)
mA
mA
mA
mA
°C
)
IOK
±20
)
IOUT
ICC
±50
Continuous current through VCC or GND
Storage Temperature
±200
TSTG
-65 ~ +150
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are
observed.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VCC
MIN
2
TYP
MAX
6
UNIT
V
Supply Voltage
Input Voltage
Output Voltage
VIN
0
Vcc
Vcc
85
V
VOUT
TA
0
V
Operating free-air temperature
Input Transition Rise or Fall Rate
-40
°C
∆t/∆v
8
ns/V
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
2.1
VCC=3V
HIGH-level input voltage
LOW-lever output voltage
VIH
VCC=4.5V
3.15
3.85
V
VCC=5.5V
VCC=3V
0.9
VIL
VCC=4.5V
1.35
1.65
V
VCC=5.5V
VCC=3V, IOH=-50μA
VCC=4.5V, IOH=-50μA
VCC=5.5V, IOH=-50μA
VCC=3V, IOH=-12mA
VCC=4.5V, IOH=-24mA
VCC=5.5V, IOH=-24mA
VCC=3V, IOH=50μA
VCC=4.5V, IOH=50μA
VCC=5.5V, IOH=50μA
VCC=3V, IOH=12mA
VCC=4.5V, IOH=24mA
VCC=5.5V, IOH=24mA
VI=VCC or GND, VCC=5.5V
VI=GND or VCC, IO=0, VCC=5.5V
VI=VCC or GND, VCC=5V
2.9
4.4
5.4
High-Level Output Voltage
Low-Level Output Voltage
VOH
V
V
2.56
3.86
4.86
0.002 0.1
0.001 0.1
0.001 0.1
0.36
VOL
0.36
0.36
Input Leakage Current
Quiescent Supply Current
Input Capacitance
II
±0.1 μA
ICC
CI
2
μA
2.6
pF
UNISONIC TECHNOLOGIES CO., LTD
3 of 5
QW-R502-988.A
www.unisonic.com.tw
U74AC32
CMOS IC
DYNAMIC CHARACTERISTICS
(CL=50pF, RL=500Ω, TA=25°C, unless otherwise specified) (see Figure 1)
PARAMETER
SYMBOL
TEST CONDITIONS
CC=3.3V±0.3V
VCC=5V±0.5V
CC=3.3V±0.3V
VCC=5V±0.5V
MIN TYP MAX UNIT
V
1.5
1.5
1.5
1.5
7
5.5
7
9
ns
ns
ns
ns
tPLH
7.5
8.5
7
Propagation delay from
Input(A or B) to Output(Y)
V
tPHL
5
OPERATING CHARACTERISTICS (VCC=5V,TA=25°C, unless otherwise specified)
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
TEST CONDITIONS
CL=50pF, f =1MHz
MIN TYP MAX UNIT
40
pF
UNISONIC TECHNOLOGIES CO., LTD
4 of 5
QW-R502-988.A
www.unisonic.com.tw
U74AC32
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics:
PRR≤1MHZ, ZO=50Ω, tr≤2.5ns,tf≤2.5ns.
3. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
5 of 5
QW-R502-988.A
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明