U74AC32_15 概述
QUADRUPLE 2-INPUT POSITIVE-OR GATE
U74AC32_15 数据手册
通过下载U74AC32_15数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载UNISONIC TECHNOLOGIES CO., LTD
U74AC32
CMOS IC
QUADRUPLE 2-INPUT
POSITIVE-OR GATE
DESCRIPTION
The U74AC32 is a quad 2-input positive-OR gate. The device
performs the Boolean function Y=A+B or Y A B in positive
logic.
FEATURES
* Operation Voltage Range: 2~6V
* Inputs Accept Voltages to 6V
* Max tpd of 7.5 ns at 5V
ORDERING INFORMATION
Ordering Number
U74AC32G-S14-R
U74AC32G-P14-R
Package
SOP-14
Packing
Tape Reel
Tape Reel
TSSOP-14
MARKING
SOP-14
TSSOP-14
14 13 12 11 10
8
9
Date Code
UTC
U74AC32G
Lot Code
4
2
5
6
7
1
3
www.unisonic.com.tw
1 of 5
Copyright © 2015 Unisonic Technologies Co., Ltd
QW-R502-988.B
U74AC32
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE(EACH GATE)
INPUTS
OUTPUT
A
H
X
L
B
X
H
L
Y
H
H
L
L: low voltage level; H: high voltage level; X: don’t care
LOGIC DIAGRAM,EACH GATE (POSITIVE LOGIC)
UNISONIC TECHNOLOGIES CO., LTD
2 of 5
QW-R502-988.B
www.unisonic.com.tw
U74AC32
CMOS IC
ABSOLUTE MAXIMUM RATING (unless otherwise specified) (Note 2)
PARAMETER
SYMBOL
VCC
RATINGS
-0.5~7.0
-0.5~Vcc+0.5
-0.5~VCC+0.5
±20
UNIT
V
Supply Voltage
Input Voltage
VIN
V
Output Voltage
VOUT
IIK
V
Input Clamp Current (VI<0 or VI>VCC
Output Clamp Current (VO<0 or VO>VCC
Output Current(VO=0 to VCC
)
mA
mA
mA
mA
°C
)
IOK
±20
)
IOUT
ICC
±50
Continuous current through VCC or GND
Storage Temperature
±200
TSTG
-65 ~ +150
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied
2. The input and output voltage ratings may be exceeded if the input and output current ratings are
observed.
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
86
UNIT
°С/W
°С/W
SOP-14
Junction to Ambient
θJA
TSSOP-14
113
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VCC
MIN
2
TYP
MAX
6
UNIT
V
Supply Voltage
Input Voltage
VIN
0
Vcc
Vcc
85
V
Output Voltage
VOUT
TA
0
V
Operating free-air temperature
Input Transition Rise or Fall Rate
-40
°C
∆t/∆v
8
ns/V
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
VCC=3V
MIN
2.1
TYP MAX UNIT
HIGH-level input voltage
LOW-lever output voltage
VIH
VCC=4.5V
VCC=5.5V
3.15
3.85
V
VCC=3V
0.9
VIL
VCC=4.5V
1.35
1.65
V
V
VCC=5.5V
VCC=3V, IOH=-50μA
VCC=4.5V, IOH=-50μA
VCC=5.5V, IOH=-50μA
VCC=3V, IOH=-12mA
VCC=4.5V, IOH=-24mA
VCC=5.5V, IOH=-24mA
VCC=3V, IOH=50μA
VCC=4.5V, IOH=50μA
VCC=5.5V, IOH=50μA
VCC=3V, IOH=12mA
VCC=4.5V, IOH=24mA
VCC=5.5V, IOH=24mA
VI=VCC or GND, VCC=5.5V
VI=GND or VCC, IO=0, VCC=5.5V
VI=VCC or GND, VCC=5V
2.9
4.4
5.4
High-Level Output Voltage
Low-Level Output Voltage
VOH
2.56
3.86
4.86
0.002
0.001
0.001
0.1
0.1
0.1
VOL
V
0.36
0.36
0.36
±0.1
2
Input Leakage Current
Quiescent Supply Current
Input Capacitance
II
μA
μA
pF
ICC
CI
2.6
UNISONIC TECHNOLOGIES CO., LTD
3 of 5
QW-R502-988.B
www.unisonic.com.tw
U74AC32
CMOS IC
DYNAMIC CHARACTERISTICS
(CL=50pF, RL=500Ω, TA=25°C, unless otherwise specified) (see Figure 1)
PARAMETER
SYMBOL
TEST CONDITIONS
CC=3.3V±0.3V
VCC=5V±0.5V
CC=3.3V±0.3V
VCC=5V±0.5V
MIN
1.5
1.5
1.5
1.5
TYP MAX UNIT
V
7
5.5
7
9
ns
ns
ns
ns
tPLH
7.5
8.5
7
Propagation delay from
Input(A or B) to Output(Y)
V
tPHL
5
OPERATING CHARACTERISTICS (VCC=5V,TA=25°C, unless otherwise specified)
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
TEST CONDITIONS
CL=50pF, f =1MHz
MIN
TYP MAX UNIT
40
pF
UNISONIC TECHNOLOGIES CO., LTD
4 of 5
QW-R502-988.B
www.unisonic.com.tw
U74AC32
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics:
PRR≤1MHZ, ZO=50Ω, tr≤2.5ns,tf≤2.5ns.
3. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
5 of 5
QW-R502-988.B
www.unisonic.com.tw
U74AC32_15 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
U74AC74 | UTC | POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET | 获取价格 | |
U74AC74G-S14-R | UTC | DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP | 获取价格 | |
U74AC74L-S14-R | UTC | DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP | 获取价格 | |
U74AC74_15 | UTC | DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP | 获取价格 | |
U74AC86 | UTC | -0.5 | 获取价格 | |
U74ACT00 | UTC | -0.5 | 获取价格 | |
U74ACT02 | UTC | -0.5 | 获取价格 | |
U74ACT04 | UTC | HEX INVERTERS | 获取价格 | |
U74ACT04G-D14-T | UTC | HEX INVERTERS | 获取价格 | |
U74ACT04G-P14-R | UTC | HEX INVERTERS | 获取价格 |
U74AC32_15 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6