LM833L-S08-T [UTC]
DUAL OPERATIONAL AND LOW VOLTAGE NOISE AMPLIFIER;型号: | LM833L-S08-T |
厂家: | Unisonic Technologies |
描述: | DUAL OPERATIONAL AND LOW VOLTAGE NOISE AMPLIFIER 放大器 |
文件: | 总5页 (文件大小:149K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
LM833
Preliminary
CMOS IC
DUAL OPERATIONAL AND
LOW VOLTAGE NOISE
AMPLIFIER
DESCRIPTION
The UTC LM833 is integrated circuit amplifiers which combine
dual operational and low voltage noise (4.5nV/ Hz ). It is
particularly suited to audio applications.
It offers excellent phase/gain margins and a very low distortion
(0.002%).
In addition, the UTC LM833 has high frequency performances
(15 MHz gain bandwidth product, 7V/μs slew rate).
FEATURES
* High slew rate: 7V/μs
* High gain bandwidth product: 15MHz
* Excellent frequency stability
* Low distortion: 0.002%
* Low voltage noise: 4.5nV/√Hz
ORDERING INFORMATION
Ordering Number
Lead Free
Package
Packing
Halogen Free
LM833G-S08-T
LM833G-S08-R
LM833L-S08-T
SOP-8
SOP-8
Tube
LM833L-S08-R
Tape Reel
LM833L-S08-R
(1) T: Tube, R: Tape Reel
(2) S08: SOP-8
(1)Packing Type
(2)Package Type
(3)Lead Free
(3) L:Lead Free, G: Halogen Free
www.unisonic.com.tw
1 of 5
Copyright © 2013 Unisonic Technologies Co., Ltd
QW-R502-A09.a
LM833
Preliminary
CMOS IC
PIN CONFIGURATION
PIN DESCRIPTION
PIN NO.
PIN NAME
Output 1
DESCRIPTION
1
2
3
4
5
6
7
8
The output of channel 1
Inverting Input 1
Non-inverting Input 1
The inverting input of channel 1
The non-inverting input of channel 1
Power supply
VCC
-
Non-inverting Input 2
Inverting Input 2
Output 2
The non-inverting input of channel 2
The inverting input of channel 2
The output of channel 2
VCC+
Power supply
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
2 of 5
QW-R502-A09.a
www.unisonic.com.tw
LM833
Preliminary
CMOS IC
SCHEMATIC DIAGRAM
VCC
+
Output
Non-Inverting
Inverting
Input
Input
VCC
-
UNISONIC TECHNOLOGIES CO., LTD
3 of 5
QW-R502-A09.a
www.unisonic.com.tw
LM833
Preliminary
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
±18 or +36
±30
UNIT
V
Supply Voltage
VCC
VID
VIN
PD
Differential Input Voltage (Note 1)
Input Voltage (Note 1)
V
±15
V
Maximum Power Dissipation (Note 2)
Junction Temperature
500
mW
°C
°C
TJ
+150
Storage Temperature
TSTG
-65~150
Notes: 1. Either or both input voltages must not exceed the magnitude of VCC+ or VCC-.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
OPERATING CONDITIONS
PARAMETER
SYMBOL
VCC
VALUE
±2.5~±15
-40~105
UNIT
V
Supply Voltage
Operating Free-Air Temperature Range
TOPER
°C
ELECTRICAL CHARACTERISTICS
(VCC+=+15V, VCC-=-15V, TAMB=25°C(unless otherwise specified))
PARAMETER
Input Offset Voltage
SYMBOL
VIO
TEST CONDITIONS
MIN TYP MAX
UNIT
mV
μV/°C
nA
RS=10Ω, VO=0V, VIC=0V
0.3
2
5
Input Offset Voltage Drift
Input Offset Current
DVIO RS=10Ω, VO=0V, TMIN.≤TAMB≤TMAX.
IIO
IIB
VO=0V, VIC=0V
VO=0V, VIC=0V
25
200
Input Bias Current
500 1000
±14
nA
Input Common Mode Voltage Range
Large Signal Voltage Gain
VICM
AVD
±12
90
V
RL=2Ω, VO=±10V
100
dB
RL=2.0kΩ
RL=2.0kΩ
RL=10kΩ
RL=10kΩ
10
13.7
V
-14
-10
V
Output Voltage Swing
±VOPP VID=±1V
CMR VIC=±13V
12
13.9
V
-14.4 -12
100
V
Common-Mode Rejection Ratio
Supply Voltage Rejection Ratio
Supply Current
80
80
dB
SVR VCC+/ VCC-=+15V/-15V ~ +5V/-5V
105
dB
ICC
VO=0V, all amplifiers
4
7
8
mA
V/μs
MHZ
MHZ
Degrees
Slew Rate
SR
VI =-10V ~ +10V, RL=2kΩ, AV=+1
5
Gain Bandwidth Product
Unity Gain Bandwidth
Phase Margin
GBW RL=2kΩ, CL=100pF, f=100kHZ
10
15
9
B
open loop
φm
RL=2kΩ
60
Equivalent Input Noise Voltage
Equivalent Input Noise Current
eN
iN
RS=100Ω, f=1kHZ
4.5
0.5
nV/ Hz
pA/ Hz
f=1kHZ
RL=2kΩ,f=20HZ ~ f=20kHZ,
VO=3VRMS, AV=+1
Total Harmonic Distortion
THD
0.002
%
Channel Separation
Full Power Bandwidth
VO1/VO2 f=20HZ ~ f=20kHZ
120
120
dB
PBW VO=27VPP, RL=2 kΩ, THD≤1%
kHZ
UNISONIC TECHNOLOGIES CO., LTD
4 of 5
QW-R502-A09.a
www.unisonic.com.tw
LM833
Preliminary
CMOS IC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
5 of 5
QW-R502-A09.a
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明