SN74LVC1G06DBVT [TI]
SINGLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT; 单个逆变器缓冲器/驱动器,具有漏极开路输出型号: | SN74LVC1G06DBVT |
厂家: | TEXAS INSTRUMENTS |
描述: | SINGLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT |
文件: | 总12页 (文件大小:306K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74LVC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES295N – JUNE 2000 – REVISED SEPTEMBER 2003
DBV OR DCK PACKAGE
(TOP VIEW)
Available in the Texas Instruments
NanoStar and NanoFree Packages
Supports 5-V V
Operation
CC
1
2
3
5
4
NC
A
GND
V
Y
CC
Input and Open-Drain Output Accept
Voltages Up To 5.5 V
Max t of 4 ns at 3.3 V
pd
Low Power Consumption, 10-µA Max I
NC – No internal connection
CC
YEA, YEP, YZA, OR YZP PACKAGE
(BOTTOM VIEW)
24-mA Output Drive at 3.3 V
I
Supports Partial-Power-Down Mode
off
Operation
3 4
2
GND
A
DNU
Y
V
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
1 5
CC
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
DNU – Do not use
– 1000-V Charged-Device Model (C101)
description/ordering information
This single inverter buffer/driver is designed for 1.65-V to 5.5-V V
operation.
CC
NanoStar and NanoFree package technology is a major breakthrough in IC packaging concepts, using the
die as the package.
The output of the SN74LVC1G06 device is open drain and can be connected to other open-drain outputs to
implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
T
A
PACKAGE
‡
NanoStar – WCSP (DSBGA)
0.17-mm Small Bump – YEA
SN74LVC1G06YEAR
SN74LVC1G06YZAR
SN74LVC1G06YEPR
SN74LVC1G06YZPR
NanoFree – WCSP (DSBGA)
0.17-mm Small Bump – YZA (Pb-free)
Reel of 3000
_ _ _CT_
NanoStar – WCSP (DSBGA)
0.23-mm Large Bump – YEP
–40°C to 85°C
NanoFree – WCSP (DSBGA)
0.23-mm Large Bump – YZP (Pb-free)
Reel of 3000
Reel of 250
Reel of 3000
SN74LVC1G06DBVR
SN74LVC1G06DBVT
SN74LVC1G06DCKR
SOT (SOT-23) – DBV
SOT (SC-70) – DCK
C06_
CT_
Reel of 250
SN74LVC1G06DCKT
†
‡
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YEA/YZA, YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code,
and one following character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition
(1 = SnPb, • = Pb-free).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar and NanoFree are trademarks of Texas Instruments.
Copyright 2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74LVC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES295N – JUNE 2000 – REVISED SEPTEMBER 2003
description/ordering information (continued)
This device is fully specified for partial-power-down applications using I .The I circuitry disables the outputs,
off
off
preventing damaging current backflow through the device when it is powered down.
FUNCTION TABLE
INPUT
A
OUTPUT
Y
H
L
L
H
logic diagram (positive logic)
2
4
A
Y
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6.5 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6.5 V
I
Voltage range applied to any output in the high-impedance or power-off state, V
O
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6.5 V
Voltage range applied to any output in the high or low state, V
O
(see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6.5 V
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
IK
OK
I
Output clamp current, I
(V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
O
Continuous output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Continuous current through V
O
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
CC
Package thermal impedance, θ (see Note 3): DBV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W
JA
DCK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252°C/W
YEA/YZA package . . . . . . . . . . . . . . . . . . . . . . . . . . . 154°C/W
YEP/YZP package . . . . . . . . . . . . . . . . . . . . . . . . . . . 132°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The value of V is provided in the recommended operating conditions table.
CC
3. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74LVC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES295N – JUNE 2000 – REVISED SEPTEMBER 2003
recommended operating conditions (see Note 4)
MIN
1.65
MAX
UNIT
Operating
5.5
V
Supply voltage
V
CC
IH
Data retention only
1.5
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 1.65 V to 1.95 V
= 2.3 V to 2.7 V
= 3 V to 3.6 V
0.65 × V
1.7
CC
V
High-level input voltage
V
V
2
= 4.5 V to 5.5 V
= 1.65 V to 1.95 V
= 2.3 V to 2.7 V
= 3 V to 3.6 V
0.7 × V
CC
0.35 × V
0.7
0.8
0.3 × V
5.5
5.5
4
CC
V
IL
Low-level input voltage
= 4.5 V to 5.5 V
CC
V
V
Input voltage
0
0
V
V
I
Output voltage
O
V
V
= 1.65 V
= 2.3 V
CC
8
CC
I
Low-level output current
16
mA
OL
V
CC
= 3 V
24
V
CC
V
CC
V
CC
V
CC
= 4.5 V
32
= 1.8 V 0.15 V, 2.5 V 0.2 V
= 3.3 V 0.3 V
= 5 V 0.5 V
20
∆t/∆v Input transition rise or fall rate
10
ns/V
5
T
A
Operating free-air temperature
–40
85
°C
NOTE 4: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
†
PARAMETER
TEST CONDITIONS
V
MIN
MAX
0.1
0.45
0.3
0.4
0.55
0.55
5
UNIT
TYP
CC
I
I
I
I
I
I
= 100
A
1.65 V to 5.5 V
1.65 V
OL
OL
OL
OL
OL
OL
= 4 mA
= 8 mA
2.3 V
V
V
OL
= 16 mA
= 24 mA
= 32 mA
3 V
4.5 V
0 to 5.5 V
0
I
I
I
A input
V = 5.5 V or GND
A
A
I
I
V or V = 5.5 V
10
off
I
O
V = 5.5 V or GND,
I = 0
O
1.65 V to 5.5 V
3 V to 5.5 V
3.3 V
10
A
CC
I
∆I
CC
One input at V
CC
– 0.6 V,
Other inputs at V
or GND
500
A
CC
C
C
V = V
or GND
4
5
pF
pF
i
I
CC
= V
V
or GND
3.3 V
o
O
CC
= 3.3 V, T = 25°C.
†
All typical values are at V
CC
A
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74LVC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES295N – JUNE 2000 – REVISED SEPTEMBER 2003
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figure 1)
V
= 1.8 V
V
= 2.5 V
V
= 3.3 V
V
= 5 V
CC
0.15 V
CC
0.2 V
CC
0.3 V
CC
0.5 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
2.2
MAX
MIN
1.1
MAX
MIN
1.2
MAX
MIN
MAX
t
pd
A
Y
6.5
4
4
1
3
ns
operating characteristics, T = 25°C
A
V
CC
= 1.8 V
V
= 2.5 V
V
CC
= 3.3 V
V
= 5 V
CC
TYP
CC
TYP
PARAMETER
TEST CONDITIONS
f = 10 MHz
UNIT
TYP
TYP
C
Power dissipation capacitance
3
3
4
6
pF
pd
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74LVC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES295N – JUNE 2000 – REVISED SEPTEMBER 2003
PARAMETER MEASUREMENT INFORMATION
(OPEN DRAIN)
V
LOAD
Open
S1
R
L
TEST
S1
From Output
Under Test
GND
t
(see Notes E and F)
(see Notes E and G)
V
V
V
PZL
LOAD
LOAD
LOAD
R
L
C
t
L
PLZ
(see Note A)
t
/t
PHZ PZH
LOAD CIRCUIT
INPUT
V
M
V
C
V
R
V
CC
LOAD
L
∆
L
V
I
t /t
r f
1.8 V 0.15 V
2.5 V 0.2 V
3.3 V 0.3 V
5 V 0.5 V
V
V
V
/2
/2
2 × V
2 × V
6 V
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
≤ 2 ns
≤ 2 ns
≤ 2.5 ns
≤ 2.5 ns
30 pF
30 pF
50 pF
50 pF
CC
CC
CC
CC
V
CC
CC
3 V
1.5 V
/2
V
CC
V
CC
2 × V
CC
0.3 V
V
I
Timing Input
Data Input
V
M
0 V
t
w
t
t
su
h
V
I
V
I
V
M
V
M
Input
V
M
V
M
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
I
I
Output
Control
V
M
V
M
V
M
V
M
Input
0 V
0 V
t
t
t
t
t
PHL
PZL
PLZ
+ V
PLH
PHL
Output
Waveform 1
V
V
/2
/2
LOAD
V
V
OH
V
V
V
V
V
M
M
Output
M
V
V
S1 at V
(see Note B)
OL
∆
LOAD
OL
OL
t
t
t
PHZ
PLH
PZH
Output
Waveform 2
S1 at V
LOAD
(see Note B)
V
∆
V
V
LOAD
OH
– V
LOAD/2
V
M
M
M
Output
≈0 V
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω.
O
D. The outputs are measured one at a time with one transition per measurement.
E. Since this device has open-drain outputs, t
and t
are the same as t
.
pd
PLZ
PZL
F.
G.
t
t
is measured at V
is measured at V
.
M
OL
PZL
PLZ
+ V .
∆
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDS025C – FEBRUARY 1997 – REVISED FEBRUARY 2002
DCK (R-PDSO-G5)
PLASTIC SMALL-OUTLINE PACKAGE
0,30
0,15
M
0,10
0,65
5
4
0,13 NOM
1,40 2,40
1,10 1,80
1
3
Gage Plane
2,15
1,85
0,15
0°–8°
0,46
0,26
Seating Plane
0,10
1,10
0,80
0,10
0,00
4093553-2/D 01/02
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-203
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, maskworkright, orotherTIintellectualpropertyrightrelatingtoanycombination, machine, orprocess
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明