MAAD-009260-0001TB [TE]
Constant Phase Digital Attenuator 32 dB, 2-Bit, TTL Driver, DC-3.0 GHz; 恒定的相位数字衰减器32分贝, 2位, TTL驱动器, DC- 3.0 GHz的型号: | MAAD-009260-0001TB |
厂家: | TE CONNECTIVITY |
描述: | Constant Phase Digital Attenuator 32 dB, 2-Bit, TTL Driver, DC-3.0 GHz |
文件: | 总6页 (文件大小:173K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Features
Functional Schematic
• Attenuation: Two 16 dB bits
• Minimal Phase Variation over Attenuation Range
•
•
•
•
•
•
Low DC Power Consumption
Hermetic Surface Mount Package
Integral TTL Driver
50 Ohm Nominal Impedance
260°C Reflow Compatible
RoHS* Compliant
Description
M/A-COM’s MAAD-009260-000100 is a GaAs FET
2-bit digital attenuator with two 16 dB steps and 32
dB total attenuation. The design has been optimized
to minimize phase variation over the attenuation
range. This attenuator and integral TTL driver is in a
hermetically sealed ceramic 16-lead surface mount
package.
The MAAD-009260-000100 is ideally
suited for use where accuracy, fast switching, very
low power consumption and low intermodulation
products are required. Typical applications include
dynamic range setting in precision receiver circuits
and other gain/leveling control circuits. Environ-
mental screening is available. Contact the factory
for information.
Pin Configuration 1
Pin No.
Function
RF1
Pin No.
Function
1
2
3
4
5
6
7
8
9
GND
+5V
-5V
GND
10
11
12
13
14
15
16
GND
GND
GND
C2
GND
GND
C1
GND
GND
GND
Ordering Information
RF2
1. The metal bottom of the case must be connected to RF
and DC ground.
Part Number
Package
MAAD-009260-000100
Bulk Packaging
MAAD-009260-0001TB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, Z0 = 50Ω, VCC = +5.0V, VEE = -5.0V
Parameter
Operating Power 2
Test Conditions
Frequency
Units
Min
Typ
Max
—
—
—
dBm
—
—
+20
Reference Insertion Loss
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
dB
dB
dB
—
—
—
—
—
—
1.9
2.1
2.7
Attenuation Accuracy
16 dB Bit (C1 Control)
16 dB Bit (C1 Control)
16 dB Bit (C1 Control)
32 dB Attenuation
32 dB Attenuation
32 dB Attenuation
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
dB
dB
dB
dB
dB
dB
15.5
15.4
15.4
30.8
30.8
30.8
—
—
—
—
—
—
16.7
16.8
16.8
33.5
34.2
35.0
Phase Accuracy
Relative to Reference Loss State
16 dB Bit (C1 Control)
16 dB Bit (C1 Control)
32 dB Attenuation
DC - 2.0 GHz
2.0 - 3.0 GHz
DC - 3.0 GHz
deg
deg
deg
-3
-4
-7
—
—
—
+3
+4
+7
VSWR
Reference Loss,
16 dB Bit (C1 Control),
or 32 dB Attenuation
DC - 2.0 GHz
2.0 - 3.0 GHz
Ratio
Ratio
—
—
—
—
1.6:1
2.2:1
Switching Speed
Ton
Toff
Trise
Tfall
1.3 V Cntl to 90% RF
1.3 V Cntl to 10% RF
10% RF to 90% RF
90% RF to 10% RF
—
—
__
__
ns
ns
ns
ns
—
—
—
—
42
30
19
16
—
—
—
—
1 dB Compression 3
Reference State
Reference State
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
>+26
>+26
—
—
Input IP3
For two-tone Input Power
up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+42
+42
—
—
Input IP2
For two-tone Input Power
up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+55
+77
—
—
Vcc
Vee
—
—
—
—
V
V
4.5
-8.0
5.0
-5.0
5.5
-4.5
VIL
VIH
LOW-level input voltage
HIGH-level input voltage
—
—
V
V
0.0
2.0
0.0
5.0
0.8
5.0
lin (Input Leakage Current)
Vin = VCC or GND
—
—
uA
uA
-1
—
1
Icc
Vcntrl = VCC or GND
—
250
400
(Quiescent Supply Current)
ΔIcc
VCC = Max
—
mA
—
—
1.5
(Additional Supply Current Per
TTL Input Pin)
Vcntrl = VCC - 2.1 V
Iee
VEE min to max
Vin = VIL or VIH
—
—
mA
-1.0
—
-0.2
50
—
—
Thermal Resistance θjc
—
°C/W
2. Maximum input power is specified with power applied to RF1. Note that C1 is the control for the 16 dB bit.
3. 1 dB Compression was measured up to +26 dBm, which is the absolute maximum rating for this device.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Absolute Maximum Ratings 4,5
Recommended PCB Configuration
Parameter
Absolute Maximum
Max Input Power 6
DC - 3.0 GHz
+26 dBm
VCC
VEE
-0.5V ≤ VCC ≤ +7.0V
-8.5V ≤ VEE ≤ +0.5V
-0.5V ≤ VCC - VEE ≤ 14.5V
-0.5V ≤ Vin ≤ VCC + 0.5V
-55°C to +125°C
VCC - VEE
Vin 7
Operating Temperature
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
6. Maximum input power is specified with power applied to
RF1.
7. Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
Truth Table (Digital Attenuator) 8
Handling Procedures
Please observe the following precautions to avoid
damage:
C2
0
C1
0
Attenuation
Loss, Reference
16.0 dB
0
1
Static Sensitivity
1
1
32.0 dB
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
0 = TTL Low; 1 = TTL High
8. C1 is specified as the control for the 16 dB bit. We show
data for the performance with the C2 control - note that the
power handling is reduced if C2 is used for the 16 dB bit.
The electrical performance of the 16 dB bit controlled by
C2 is not specified.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Typical Performance Curves
Attenuation - 16 dB Bit (C1) vs. Frequency
Reference Loss vs. Frequency
3.0
17.0
25ºC
25ºC
85ºC
2.5
16.7
16.4
16.1
15.8
15.5
85ºC
2.0
1.5
-40ºC
-40ºC
1.0
0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
Attenuation - 16 dB Bit (C2) vs. Frequency
Attenuation - 32 dB Attenuation vs. Frequency
17.0
35.0
25ºC
25ºC
85ºC
85ºC
16.7
16.4
16.1
15.8
15.5
34.0
33.0
-40ºC
-40ºC
32.0
31.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
Phase - 16 dB Bit (C1) vs. Frequency
Relative to Reference Loss State
Phase - 16 dB Bit (C2) vs. Frequency
Relative to Reference Loss State
5.0
2.0
1.0
-40ºC
-40ºC
3.0
25ºC
1.0
-1.0
-3.0
0.0
-1.0
-2.0
25ºC
85ºC
85ºC
-5.0
-7.0
-3.0
-4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Typical Performance Curves
Phase - 32 dB Attenuation vs. Frequency
Relative to Reference Loss State
VSWR vs. Frequency
Reference Loss State
2.0
1.8
1.6
1.4
1.2
20.0
15.0
-40ºC
10.0
5.0
85ºC
RF1
0.0
-5.0
RF2
25ºC
1.0
-10.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
VSWR - 16 dB Bit (C1) vs. Frequency
VSWR - 16 dB Bit (C2) vs. Frequency
2.0
1.8
2.0
1.8
1.6
RF2
1.6
1.4
1.2
1.0
RF2
RF1
RF1
1.4
1.2
1.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
VSWR - 32 dB Attenuation vs. Frequency
2.0
1.8
1.6
RF1
1.4
1.2
RF2
1.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009260-000100
Constant Phase Digital Attenuator
32 dB, 2-Bit, TTL Driver, DC-3.0 GHz
Rev. V1
Typical Input IP2 and IP3 at Room Temperature 9
IP2
IP3
Attenuation
Units
500
MHz
500
MHz
50 MHz
2 GHz 50 MHz
2 GHz
Reference State
16 dB (C1)
16 dB (C2)
32 dB
55
62
57
65
77
78
78
80
75
87
77
90
42
41
41
43
42
41
41
43
43
44
44
53
dBm
dBm
dBm
dBm
9. IP2 and IP3 are measured with two-tone inputs F1 and F2 up to +5 dBm with 1 MHz spacing.
Lead-Free, CR-12 Ceramic Package†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明