MAAD-011021-000DIE [TE]
Digital Attenuator, 6-Bit, 0.5 dB LSB step;型号: | MAAD-011021-000DIE |
厂家: | TE CONNECTIVITY |
描述: | Digital Attenuator, 6-Bit, 0.5 dB LSB step |
文件: | 总8页 (文件大小:945K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Features
Functional Schematic
6-bit, 0.5 dB LSB, 31.5 dB range
DC to 40 GHz operation
Integrated TTL 0/+5V control
+/- 0.5 dB typical bit error
Low RMS phase 4.3° @ 20 GHz
Die size: 1.55 x 0.95 x 0.1 mm
ESD protection for all controls and bias
100% On-wafer DC & RF Tested
GND
10
GND
GND
8
9
RFOUT
GND
RFIN
0.5
dB
1
dB
2
dB
4
dB
16
dB
8
dB
GND
7
VCC
Description
1
2
3
4
5
6
The MAAD-011021 is a wide band 6-bit digital
attenuator covering DC to 40 GHz. The attenuation
bit-values are 0.5 dB LSB (least significant bit), 1, 2,
4, 8, and 16 dB for a total attenuation of 31.5 dB.
Attenuation error is typically less than +/- 0.5 dB,
RMS phase error is less than 5 degrees at 20 GHz,
and typical insertion loss is 7.1 dB at 15 GHz.
Return loss is typically 12 dB across all frequencies
and attenuation states.
V1
V2
V3
V4
V5
V6
Pad Configuration
Pad No.
Pad Name
Function
1
2
3
4
V1
V2
V3
V4
0.5 dB bit control
1 dB bit control
2 dB bit control
4 dB bit control
The attenuator integrates an inverter to allow a
single control for series/shunt attenuation. Inverter
requires a -5 V supply (VCC) and 17 mA typical, logic
is 0 V / +5 V.
The device is also available in a lead-free 3 mm
16-lead PQFN plastic package; order part number
MAAD-011021-TR0500.
5
6
7
V5
V6
8 dB bit control
16 dB bit control
-5 V Bias
VCC
8
9
RFIN
RFOUT
GND
Pad2
RF Input
RF Output
Ordering Information
10
11
RF and DC Ground
Back of die
Part Number
Package
Bulk Die
MAAD-011021-000DIE
MAAD-011021-0GPDIE
MAAD-011021-DIESMB
2. The pad on the backside of the die must be connected to RF,
Die in Gel Pack
Die on Sample Board
DC and thermal ground.
1. All sample boards include 3 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Electrical Specifications: TA = +25°C, VCC = -5 V, Z0 = 50 Ω (unless otherwise specified)
Parameter
Insertion Loss
Return Loss
Test Conditions
Units
Min.
Typ.
Max.
DC - 20 GHz
20 - 40 GHz
10 GHz
6.4
8.8
6.0
7.0
8.0
—
—
7.0
8.0
9.0
dB
—
20 GHz
30 GHz
DC - 40 GHz
dB
—
15
—
20 GHz
LSB: 0.5 dB
Bit 2: 1 dB
Bit 3: 2 dB
Bit 4: 4 dB
Bit 5: 8 dB
Bit 6: 16 dB
0.3
0.7
1.7
3.6
7.0
0.4
0.9
1.8
3.8
8.0
0.5
1.0
1.9
4.0
9.0
Attenuation Bits
dB
16.0
17.4
19.0
DC - 20 GHz
20 - 40 GHz
0.3
1.2
Attenuation Error RMS
Phase Error RMS
dB
—
—
—
—
DC - 20 GHz
20 - 40 GHz
2.6
7.2
deg
Input P0.1dB
Input IP3
DC - 40 GHz
DC - 40 GHz
dBm
dBm
ns
—
—
—
—
—
—
24
38
—
—
—
—
—
45
Switching Time
Control Logic
Control Current
Supply Current
DC - 40 GHz
45
DC - 40 GHz
V
0/+5
6
each control bit @ +5 V
DC - 40 GHz
mA
mA
17
Absolute Maximum Ratings3,4
Handling Procedures
Please observe the following precautions to avoid
damage:
Parameter
Input Power
Absolute Maximum
+35 dBm
Operating Voltage
Control Voltage
-5 V
Static Sensitivity
0 / +5 V
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1A devices.
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. MACOM does not recommend sustained operation near
these survivability limits.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Truth Table5,6
V1
0.5 dB
V2
1 dB
V3
2 dB
V4
4 dB
V5
8 dB
V6
16 dB
State
low
high
low
low
low
low
low
high
low
low
high
low
low
low
low
high
low
low
low
high
low
low
low
high
low
low
low
low
high
low
low
high
low
low
low
low
low
high
low
high
low
low
low
low
low
low
high
high
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
5. high = +5 V @ 5.7 mA, low = 0 V @ 1.0 mA.
6. Any combination of the above states will provide attenuation approximately equal to the sum of the bits selected.
Die Layout
Bond Pad Opening Detail
Size (x)
µm
Size (y)
µm
Pad
A - F
G, N
H, M
I, L
J
64
64
64
64
89
69
64
59
139
87
57
K
69
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Typical Performance Curves
Insertion Loss
P0.1dB Compression
0
30
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
28
26
24
22
20
-4
-8
-12
-16
0
10
20
30
40
50
0
10
20
30
40
50
Frequency (GHz)
Frequency (GHz)
Maximum Output Return Loss (all states)
Maximum Input Return Loss (all states)
0
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-4
-8
-4
-8
-12
-16
-12
-16
0
10
20
30
40
50
0
10
20
30
40
50
Frequency (GHz)
Frequency (GHz)
Input IP3 (reference states)
Noise Figure (reference states)
60
12
10
8
+25°C
-40°C
+85°C
50
40
30
20
10
6
4
2
0
0
10
20
30
40
50
0
5
10
15
20
25
30
35
40
Frequency (GHz)
Frequency (GHz)
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Typical Performance Curves
Attenuation
Relative Attenuation
0
0
-5
-10
-15
-20
-25
-4
-8
REF
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
-12
REF
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
-16
-20
-30
-35
0
10
20
30
40
40
40
50
50
50
0
10
20
30
40
40
40
50
50
50
Frequency (GHz)
Frequency (GHz)
RMS Phase Error
RMS Attenuation Error
5
25
4
3
2
1
0
20
15
10
5
0
0
10
20
30
0
10
20
30
Frequency (GHz)
Frequency (GHz)
Relative Phase Error
Relative Attenuation Error
2
40
REF
Bit 1
Bit 2
Bit 4
Bit 5
Bit 6
1
0
20
Bit 3
-1
-2
0
-20
-40
REF
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
-3
-4
0
10
20
30
0
10
20
30
Frequency (GHz)
Frequency (GHz)
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Typical Performance Curves
Relative Attenuation Error (Bit 1, 2)
Relative Phase Error (Bit 1, 2)
2
40
30
1
0
Bit 1
Bit 2
20
10
0
-1
-10
-20
-30
-40
Bit 1
Bit 2
-2
-3
-4
0
10
20
30
40
40
40
50
50
50
0
10
20
30
40
40
40
50
50
50
Frequency (GHz)
Frequency (GHz)
Relative Phase Error (Bit 3, 4)
Relative Attenuation Error (Bit 3, 4)
2
40
30
1
0
Bit 3
Bit 4
20
10
-1
0
-10
-20
-30
-40
Bit 3
Bit 4
-2
-3
-4
0
10
20
30
0
10
20
30
Frequency (GHz)
Frequency (GHz)
Relative Phase Error (Bit 5, 6)
Relative Attenuation Error (Bit 5, 6)
2
40
30
1
0
Bit 5
Bit 6
20
10
0
-1
-10
-20
-30
-40
-2
Bit 5
Bit 6
-3
-4
0
10
20
30
0
10
20
30
Frequency (GHz)
Frequency (GHz)
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Typical Performance Curves
Step Error Between Successive States
Switching Time
7
6
0
3
5 GHz
10 GHz
20 GHz
30 GHz
-5
2
5
4
3
2
1
0
-10
-15
-20
-25
-30
-35
-40
1
0
Control Voltage (L)
S21 (R)
-1
-2
-3
-1
-100 -50
0
50
100 150 200 250 300
0
5
10
15
20
25
30
35
Time (ns)
Attenuation State (dB)
Phase Error over Attenuation States
20
15
10
5
0
-5
1 GHz
3 GHz
5 GHz
10 GHz
20 GHz
-10
-15
-20
0
5
10
15
20
25
30
35
Attenuation State (dB)
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
MAAD-011021-000DIE
Digital Attenuator, 6-Bit, 0.5 dB LSB step
DC - 40 GHz
Rev. V1
Applications Section
Application Information
Mounting and Bonding Techniques
The MAAD-011021 is designed for extremely wide
band and robust attenuation applications. It uses a
combination of series and shunt cold channel,
multiple-gate FETs to achieve high linearity and
accurate attenuation repeatability. We recommend
using double bonds at both RF input and output, as
well as keeping bondwires as short as possible to
ensure higher frequency operation. This part is the
most accurate for X-band applications.
The Monolithic Circuit is designed for robust and
reliable usage. The die features complete
passivation on all critical areas as well as a
protective BCB die coat.
The die should be attached directly to the ground
plane with silver conductive epoxy for best results.
A true 50 Ω microstrip or co-planar waveguide is
recommended for bringing RF to and from the die
as shown in the demonstration board below. This
board uses 0.200 mm (8 mils) Rogers 4350 as the
top dielectric layer.
The MAAD-011021 has a built in inverter function
which allows a single +5 V / 0 V single control for
each bit. This is useful if you require very fast
switching times and have +5 V / 0 V available.
Alternatively one can mount the die directly to the
ground plane and launch with microstrip substrates
in either alumina or Rogers to the same level as
the top of the die, allowing for shorter bond wires.
The MAAD-011021 is DC-coupled at both RFIN and
RFOUT. If operation at DC is desired, 0 Ω jumpers
(or continuous 50 Ω RF lines) should be used in
series with RFIN and RFOUT. Customer should take
extra care to ensure that the voltage at both RFIN
and RFOUT are 0 V; excess voltage can damage the
part. If operation at DC is not required, simply use
series blocking capacitors.
The RF input and output pads are DC coupled.
Blocking capacitors are required if there is a DC
potential on either port.
PCB Layout
Sample board size above is 28 x 25 mm
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport
相关型号:
©2020 ICPDF网 联系我们和版权申明