OLH249 [SKYWORKS]

Transistor Output Optocoupler;
OLH249
型号: OLH249
厂家: SKYWORKS SOLUTIONS INC.    SKYWORKS SOLUTIONS INC.
描述:

Transistor Output Optocoupler

输出元件 光电
文件: 总6页 (文件大小:413K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DATA SHEET  
OLH249: Radiation-Tolerant, Phototransistor Hermetic  
Optocoupler  
Features  
Radiation-tolerant version of 4N49  
5
2
Current Transfer Ratio (CTR) guaranteed over –55 °C to  
+100 °C ambient temperature range  
Anode  
Base  
1000 VDC electrical isolation  
High CTR  
3
Collector  
Standard TO-5 hermetic package  
High reliability screening available  
1
7
Emitter  
Cathode  
202238-001  
Description  
The OLH249 is designed especially for high-reliability applications  
that require optical isolation in radiation environments, such as  
gamma, neutron, and proton radiation with high CTR and low  
saturation VCE. Each optocoupler consists of an LED and N-P-N  
silicon phototransistor electrically isolated, but optically coupled  
inside a hermetic TO-5 package. Electrical parameters are similar  
to the JEDEC registered 4N49 optocoupler, but have much better  
CTR degradation characteristics due to radiation exposure  
(contact IsoLink for more information). The OLH249 has 100  
percent high-reliability screened parts available.  
Figure 1. OLH249 Block Diagram  
Figure 1 shows the OLH249 functional block diagram. Table 1  
provides the OLH249 absolute maximum ratings. Table 2 provides  
the OLH249 electrical specifications.  
Figures 2 through 4 illustrate the OLH249 typical performance  
characteristics. Figure 5 shows the OLH249 switching test circuit.  
Figure 6 provides the OLH249 package dimensions.  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
202238F • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 13, 2017  
1
DATA SHEET • OLH249: RADIATION-TOLERANT, PHOTOTRANSISTOR HERMETIC OPTOCOUPLER  
Table 1. OLH249 Absolute Maximum Ratings  
Parameter  
Symbol  
Minimum  
Maximum  
Units  
Coupled  
1
Input to output isolation voltage  
Storage temperature range  
VDC  
TSTG  
TA  
–1000  
–65  
+1000  
+150  
+125  
+240  
V
C  
C  
C  
Operating temperature range  
–55  
Mounting temperature (10 seconds maximum)  
TMTG  
Input Diode  
Average input current  
IDD  
IF  
40  
1
mA  
A
2
Peak forward current  
Reverse voltage  
VR  
2
V
Output Detector  
Collector to emitter voltage  
Emitter to base voltage  
Collector to base voltage  
Continuous collector current  
VCE  
VEB  
VCB  
ICC  
40  
7
V
V
45  
50  
300  
V
mA  
mW  
3
Power dissipation  
PD  
1
2
3
Measured between pins 5, 6, and 7 shorted together, and pins 1, 2, and 3 shorted together. TA = 25 °C and duration = 1 second.  
Value applies for Pw ≤1 ms, PRR ≤300 pps.  
Derate linearly at 3.0 mW/°C above 25 °C.  
ESD HANDLING:Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.  
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce  
potentials of several kilovolts on the human body or equipment, which can discharge without detection.  
Industry-standard ESD handling precautions should be used at all times.  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
2
April 13, 2017 • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202238F  
DATA SHEET • OLH249: RADIATION-TOLERANT, PHOTOTRANSISTOR HERMETIC OPTOCOUPLER  
Table 2. OLH249 Electrical Specifications1  
(TA = 25 C, Unless Otherwise Noted)  
Parameter  
Symbol  
Test Condition  
IF = 1 mA, VCE = 5 V  
Minimum  
2.0  
Maximum  
Units  
mA  
mA  
mA  
µA  
On-state collector current  
ICC (ON)  
12.0  
IF = 2 mA, VCE = 5 V, TA = –55 °C  
IF = 2 mA, VCE = 5 V, TA = +125 °C  
IF = 10 mA, VCB = 5 V  
2.8  
2.0  
On-state collector base current  
Saturation voltage  
ICCB(ON)  
30  
VCE_SAT  
IF = 2 mA, ICC = 2 mA  
0.3  
V
Breakdown voltage:  
Collector to emitter  
Collector to base  
BVCEO  
BVCBO  
BVEBO  
ICE = 1 mA  
40  
45  
7
V
V
V
ICB = 100 μA  
IEB = 100 μA  
Emitter to base  
Off-state leakage current:  
Collector to emitter  
ICE(OFF)  
VCE = 20 V  
100  
100  
10  
nA  
μA  
VCE = 20 V, TA = 125 °C  
VCB = 20 V  
nA  
Collector to base  
ICB(OFF)  
VF  
Input forward voltage  
IF = 10 mA, TA = –55 °C  
IF = 10 mA  
1.4  
1.2  
1.1  
2.0  
1.8  
1.7  
100  
V
V
IF = 10 mA, TA = +125 °C  
VR = 2 V  
V
Input reverse current  
IR  
μA  
2
Input to output resistance  
RI_O  
CI_O  
tR  
VI_O = ±1000 VDC  
VI_O = 0 V, f = 1 MHz  
VCC = 10 V, RL = 100 Ω  
IF = 5 mA  
1011  
2
Input to output capacitance  
5
pF  
μs  
μs  
Rise time  
Fall time  
25  
25  
tF  
1
2
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to the device with only one parameter set at the limit and all other parameters set at  
or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.  
Measured between pins 5, 6, and 7 shorted together, and pins 1, 2, and 3 shorted together. TA = 25 °C and duration = 1 second.  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
202238F • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 13, 2017  
3
DATA SHEET • OLH249: RADIATION-TOLERANT, PHOTOTRANSISTOR HERMETIC OPTOCOUPLER  
Typical Performance Characteristics  
100.0  
10.0  
1.0  
9
8
7
6
5
4
3
2
1
0
Normalized to:  
I
F
= 10 mA  
VCE = 5 V  
TA  
= 25 °C  
+125 °C  
+25 °C  
–55 °C  
0.1  
0.9 1.1  
1.3  
1.5  
1.7  
1.9  
2.1  
10  
0
1
2
3
4
5
6
7
8
9
VF = Forward Voltage (V)  
IF = Forward Current (mA)  
Figure 3. Normalized Collector Current vs Forward Current  
Figure 2. Forward Current vs Diode Forward Voltage  
1.8  
Normalized to:  
V
CE = 5 V  
= 25 °C  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
T
A
IF  
= 1 mA  
–75 –50 –25  
0
+25 +50 +75 +100 +125 +150  
Ambient Temperature ( °C)  
Figure 4. Normalized CTRCE vs Temperature  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
4
April 13, 2017 • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202238F  
DATA SHEET • OLH249: RADIATION-TOLERANT, PHOTOTRANSISTOR HERMETIC OPTOCOUPLER  
V
CC  
Input I  
F
IF  
Pulse Width = 100 μs  
Duty Cycle = 1%  
0
90%  
V
0
OUT  
10%  
V
OUT  
tr  
tf  
100 Ω  
RL  
202238-005  
Figure 5. OLH249 Switching Test Circuit  
Ø
0.200” (5.08 mm) Max  
0.362” (9.195 mm)  
0.358” (9.093 mm)  
Ø
0.019” (0.48 mm)  
6 Leads (Gold Plated)  
0.028” (0.416 mm)  
0.100” (2.54 mm) Max  
0.016” (0.41 mm)  
5
6
0.335” (8.51 mm)  
0.305” (7.75 mm)  
0.045” (1.14 mm)  
7
3
0.029” (0.74 mm)  
0.034” (0.86 mm)  
0.028” (0.71 mm)  
2
1
0.560” (14.22 mm)  
0.302” (7.671 mm)  
0.298” (7.569 mm)  
0.185”  
0.500” (12.70 mm)  
45°  
3
45°  
(4.70 mm)  
Collector  
Anode  
5
Note: The LED is electrically isolated from the can.  
Bottom  
View  
Base  
2
6
N/C  
1
Cathode  
7
Emitter  
202238-006  
Figure 6. OLH249 Package Dimensions  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
202238F • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 13, 2017  
5
DATA SHEET • OLH249: RADIATION-TOLERANT, PHOTOTRANSISTOR HERMETIC OPTOCOUPLER  
Ordering Information  
Model Name  
Manufacturing Part Number  
OLH249: Radiation-Tolerant, Phototransistor Hermetic Optocoupler  
OLH249  
Copyright © 2012-2017 Isolink, Inc. All Rights Reserved.  
Information in this document is provided in connection with Isolink, Inc. (“Isolink”), a wholly-owned subsidiary of Skyworks Solutions, Inc. These materials, including the information contained  
herein, are provided by Isolink as a service to its customers and may be used for informational purposes only by the customer. Isolink assumes no responsibility for errors or omissions in these  
materials or the information contained herein. Isolink may change its documentation, products, services, specifications or product descriptions at any time, without notice. Isolink makes no  
commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.  
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Isolink assumes no liability for any materials, products or information  
provided hereunder, including the sale, distribution, reproduction or use of Isolink products, information or materials, except as may be provided in Isolink Terms and Conditions of Sale.  
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A  
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY  
DISCLAIMED. ISOLINK DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. ISOLINK SHALL  
NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST  
REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGE.  
Customers are responsible for their products and applications using Isolink products, which may deviate from published specifications as a result of design defects, errors, or operation of products  
outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Isolink assumes no liability for applications  
assistance, customer product design, or damage to any equipment resulting from the use of Isolink products outside of stated published specifications or parameters.  
Isolink is a trademark of Isolink Inc. in the United States and other countries. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United  
States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners.  
Phone [408] 946-1968 • Fax [408] 946-1960 • hirel.sales@skyworksinc.com • www.skyworksinc.com  
6
April 13, 2017 • Isolink Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202238F  

相关型号:

OLH300

High Speed Hermetic Optocoupler
ETC

OLH6000

LOGIC OUTPUT OPTOCOUPLER
SKYWORKS

OLH6001

LOGIC OUTPUT OPTOCOUPLER
SKYWORKS

OLI249

Radiation Tolerant Phototransistor Optocoupler For Hybrid Assembly
ETC

OLI400

Miniature Low Input-Current Optocoupler
ETC

OLM-018

Luftgekühlte LED Strahlungsquelle
OSA

OLM-018AIR

Luftgekühlte LED Strahlungsquelle
OSA

OLM-018B460Air

Luftgekühlte LED Strahlungsquelle
OSA

OLM-018UV365Air

Luftgekühlte LED Strahlungsquelle
OSA

OLM-018UV390Air

Luftgekühlte LED Strahlungsquelle
OSA

OLM-018UV420Air

Luftgekühlte LED Strahlungsquelle
OSA

OLM-034C

Luftgekühlte LED Strahlungsquelle
OSA