RSB12JS2FH [ROHM]
暂无描述;
ROHM 
RSB12JS2
Diodes
Bi Direction ESD Protection Diode
(Silicon Epitaxial Planer)
RSB12JS2
zApplication
ESD Protection
zFeatures
1) Low capacitance
2) Bi direction
3) Ultra small mold type (EMD6)
zAbsolute maximum ratings (Ta=25°C)
Power dissipation
Pd
Tj
150 mW/Total
Junction temperature
Storage temperature
150 °C
−55 to 150 °C
Tstg
zElectrical characteristics (Ta=25°C) (∗Rating of per diode)
Standard
MAX.
Characteristic
Symbol
Test Condition
MIN.
Zener Voltage
Reverse current
Vz
IR
Iz=
VR=
5 mA
9 V
9.6 V
14.4 V
0.1µA
-
f=
VR=
1MHz
0 V
ꢀ
Junction capacitance
Ct
1 pF
TYP.
Please pay attention to static electricity when handling.
Zener voltage (Vz) shall be measured at 40ms after loading current.
∗
∗
1/3
RSB12JS2
Diodes
zExternal dimensions (Unit : mm)
1.0 ± 0.1
0.5 ± 0.05
0.5
0.5
(3)
(4)
(2)
(1)
(3)
(4)
(2)
(5)
(1)
(6)
0 to 0.1
(5)
(6)
(3)…N/C
(6)…N/C
0.22 0.05
±
0.13 ± 0.05
1.6 ± 0.1
zOthers
Characteristic
IEC-61000-4-2
Charge discharge Capacitance
Discharge resistance
Repeat by 10 times
No erroneous operation
Contact
150 pF
：ꢀ
Equipment Composition
330
：
Ω
Criterion
± 8 kV
± 15 kV
：
：
In air
2/3
RSB12JS2
Diodes
zRecommended mounting pad layout sizes
OPEN
(3)
(2)
(1)
0.5
0.15
0.5
0.25
0.3
(5)
0.4
(4)
(6)
OPEN
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号：
©2020 ICPDF网 联系我们和版权申明