ISL21007BFB825ZT [RENESAS]
1-OUTPUT THREE TERM VOLTAGE REFERENCE, 2.5V, PDSO8, ROHS COMPLIANT, MS-012AA, SOIC-8;型号: | ISL21007BFB825ZT |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 2.5V, PDSO8, ROHS COMPLIANT, MS-012AA, SOIC-8 光电二极管 输出元件 |
文件: | 总20页 (文件大小:1119K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Precision, Low Noise FGA™ Voltage References
ISL21007
Features
The ISL21007 FGA™ voltage references are extremely low
power, high precision, and low noise voltage references
fabricated on Intersil’s proprietary Floating Gate Analog
technology. The ISL21007 features very low noise (4.5µVP-P for
0.1Hz to 10Hz) and very low operating current (150µA, Max). In
addition, the ISL21007 family features guaranteed initial
accuracy as low as ±0.5mV.
• Reference Output Voltage . . . .1.250V, 2.048V, 2.500V,3.000V
• Initial Accuracy. . . . . . . . . . . . . . . . . . . . . . . ±0.5mV (B grade)
• Input Voltage Range
ISL21007-12, 20, 25. . . . . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V
ISL21007-30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2V to 5.5V
• Low Output Voltage Noise. . . . . . . . 4.5µVP-P (0.1Hz to 10Hz)
• Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 150µA (Max)
• Temperature Coefficient . . . . . . . . . . . . . . 3ppm/°C (B grade)
• Operating Temperature Range. . . . . . . . . . .-40°C to +125°C
• Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ld SOIC
• Pb-Free (RoHS Compliant)
This combination of high initial accuracy, low drift, and low
output noise performance of the ISL21007 enables versatile
high performance control and data acquisition applications
with low power consumption.
Available Options
Applications
• High Resolution A/Ds and D/As
• Digital Meters
VOUT
OPTION
(V)
INITIAL
ACCURACY
(mV)
PART
NUMBER
TEMPCO.
(ppm/°C)
ISL21007BFB812Z
(Note 1)
1.250
±0.5
3
• Bar Code Scanners
• Basestations
ISL21007CFB812Z
ISL21007DFB812Z
1.250
1.250
2.048
±1.0
±2.0
±0.5
5
10
3
• Battery Management/Monitoring
• Industrial/Instrumentation Equipment
ISL21007BFB820Z
(Note 2)
Related Literature
• AN1533, “X-Ray Effects on Intersil FGA References”
ISL21007CFB820Z
ISL21007DFB820Z
2.048
2.048
2.500
±1.0
±2.0
±0.5
5
10
3
• AN1494, “Reflow and PC Board Assembly Effects on Intersil
FGA References”
ISL21007BFB825Z
(Note 1)
Pin Configuration
ISL21007CFB825Z
ISL21007DFB825Z
2.500
2.500
3.000
±1.0
±2.0
±0.5
5
10
3
ISL21007
(8 LD SOIC)
TOP VIEW
ISL21007BFB830Z
(Note 3)
GND or NC
VIN
1
2
3
4
8
7
6
5
DNC
ISL21007CFB830Z
ISL21007DFB830Z
NOTES:
3.000
3.000
±1.0
±2.0
5
DNC
10
DNC
VOUT
TRIM
GND
1. Not recommended for new designs. Recommended replacement
part ISL21009.
2. Not recommended for new designs. Recommended replacement
part ISL21007CFB820Z.
3. Not recommended for new designs. Recommended replacement
part ISL21007CFB830Z.
March 27, 2012
FN6326.10
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2007, 2011, 2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1
ISL21007
Ordering Information
PART NUMBER
(Notes 4, 5, 6)
PART
MARKING
VOUT OPTION
(V)
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
GRADE
PKG. DWG. #
M8.15
ISL21007BFB812Z
(Note 7)
21007BF Z12
1.250
±0.5mV, 3ppm/°C
-40 to +125
8 Ld SOIC
ISL21007CFB812Z
ISL21007DFB812Z
21007CF Z12
21007DF Z12
21007BF Z20
1.250
1.250
2.048
±1.0mV, 5ppm/°C
±2.0mV, 10ppm/°C
±0.5mV, 3ppm/°C
-40 to +125
-40 to +125
-40 to +125
8 Ld SOIC
8 Ld SOIC
8 Ld SOIC
M8.15
M8.15
M8.15
ISL21007BFB820Z
(Note 8)
ISL21007CFB820Z
ISL21007DFB820Z
21007CF Z20
21007DF Z20
21007BF Z25
2.048
2.048
2.500
±1.0mV, 5ppm/°C
±2.0mV, 10ppm/°C
±0.5mV, 3ppm/°C
-40 to +125
-40 to +125
-40 to +125
8 Ld SOIC
8 Ld SOIC
8 Ld SOIC
M8.15
M8.15
M8.15
ISL21007BFB825Z
(Note 7)
ISL21007CFB825Z
ISL21007DFB825Z
21007CF Z25
21007DF Z25
21007BF Z30
2.500
2.500
3.000
±1.0mV, 5ppm/°C
±2.0mV, 10ppm/°C
±0.5mV, 3ppm/°C
-40 to +125
-40 to +125
-40 to +125
8 Ld SOIC
8 Ld SOIC
8 Ld SOIC
M8.15
M8.15
M8.15
ISL21007BFB830Z
(Note 9)
ISL21007CFB830Z
ISL21007DFB830Z
NOTES:
21007CF Z30
21007DF Z30
3.000
3.000
±1.0mV, 5ppm/°C
±2.0mV, 10ppm/°C
-40 to +125
-40 to +125
8 Ld SOIC
8 Ld SOIC
M8.15
M8.15
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin
plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
5. Add “-T*” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
6. For Moisture Sensitivity Level (MSL), please see device information page for ISL21007. For more information on MSL please see techbrief TB363.
7. Not recommended for new designs. Recommended replacement part ISL21009.
8. Not recommended for new designs. Recommended replacement part ISL21007CFB820Z.
9. Not recommended for new designs. Recommended replacement part ISL21007CFB830Z.
FN6326.10
March 27, 2012
2
ISL21007
Pin Descriptions
PIN NUMBER
PIN NAME
GND or NC
VIN
DESCRIPTION
1
Ground or No Connection
Power Supply Input Connection
Ground
2
4
5
GND
TRIM
Allows user trim VOUT ±2.5%
6
VOUT
Voltage Reference Output Connection
3, 7, 8
DNC
Do Not Connect; Internal Connection - Must Be Left Floating
Typical Application Circuit
8
1
GND
NC
+3V
7
6
5
VIN
NC
2
3
4
NC
VOUT
C1
10µF
GND
TRIM
ISL21007-12, 20, 25, 30
SPI BUS
X79000
1
2
20
CS
SCK
A0
19
18
17
16
15
14
13
12
11
CLR
VCC
VH
3
A1
4
A2
5
SI
VL
C1
0.001µF
6
SO
VREF
VSS
VOUT
VBUF
VFB
7
RDY
UP
8
LOW NOISE DAC OUTPUT
9
DOWN
OE
10
FIGURE 1. TYPICAL APPLICATION PRECISION 12-BIT SUBRANGING DAC
FN6326.10
March 27, 2012
3
ISL21007
Absolute Voltage Ratings
Thermal Information
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V
Max Voltage VOUT to GND (10s). . . . . . . . . . . . . . . . . . . . . . -0.5V to VOUT + 1
Voltage on “DNC” pins . . . . . . . . . No connections permitted to these pins.
ESD Rating
Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6kV
Machine Model (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V
Charged Device Model (CDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Thermal Resistance (Typical, Note 11)
θ
JA (°C/W)
113.12
8 Ld SOIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous Power Dissipation (Note 11). . . . . . . . . . . . . . . . . . .TA = +70°C
8 Ld SOIC Derate 5.88mW/°C above +70°C. . . . . . . . . . . . . . . . . .471mW
Pb-Free Reflow Profile (Note 12) . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature Range (Full Range Industrial) . . . . . . . . . . .-40°C to +125°C
Environmental Operating Conditions
X-Ray Exposure (Note 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mRem
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted,
all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
NOTES:
10. Measured with no filtering, distance of 10” from source, intensity set to 55kV and 70mA current, 30s duration. Other exposure levels should be
analyzed for Output Voltage drift effects. See “Applications Information” on page 16.
11. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
12. Post-reflow drift for the ISL21007 devices will range from 100µV to 1.0mV based on experimental results with devices on FR4 double sided boards.
The design engineer must take this into account when considering the reference voltage after assembly.
Common Electrical Specifications (ISL21007-12, -20, -25, -30) TA = -40°C to +125°C, unless otherwise
specified. Boldface limits apply over the operating temperature range, -40°C to +125°C.
MIN
MAX
PARAMETER
VOA
DESCRIPTION
CONDITIONS
(Note 16) TYP (Note 16)
UNIT
mV
VOUT Accuracy @ TA = +25°C
ISL21007B
ISL21007C
ISL21007D
ISL21007B
ISL21007C
ISL21007D
-0.5
-1.0
-2.0
+0.5
+1.0
+2.0
3
mV
mV
TC VOUT
Output Voltage Temperature
Coefficient (Note NOTES:)
ppm/°C
ppm/°C
ppm/°C
µA
5
10
IIN
Supply Current
75
±2.5
120
60
150
Trim Range
±2.0
%
tR
Turn-on Settling Time
Ripple Rejection
Output Voltage Noise
Broadband Voltage Noise
Noise Density
VOUT = ±0.1%
f = 10kHz
µs
dB
eN
VN
0.1Hz ≤ f ≤ 10Hz
10Hz ≤ f ≤ 1kHz
f = 1kHz
4.5
2.2
60
µVP-P
µVRMS
nV/√Hz
Electrical Specifications (ISL21007-12, V
= 1.250V) VIN = 3.0V, TA = -40°C to +125°C, unless otherwise
OUT
specified. Boldface limits apply over the operating temperature range, -40°C to +125°C.
MIN
MAX
PARAMETER
VIN
DESCRIPTION
Input Voltage Range
CONDITIONS
(Note 16)
TYP
(Note 16)
UNIT
V
2.7
5.5
VOUT
Output Voltage
Line Regulation
1.250
100
V
ΔVOUT /ΔVIN
2.7V < VIN < 5.5V
700
µV/V
FN6326.10
March 27, 2012
4
ISL21007
Electrical Specifications (ISL21007-12, V
= 1.250V) VIN = 3.0V, TA = -40°C to +125°C, unless otherwise
OUT
specified. Boldface limits apply over the operating temperature range, -40°C to +125°C. (Continued)
MIN
(Note 16)
MAX
(Note 16)
PARAMETER
DESCRIPTION
Load Regulation
CONDITIONS
Sourcing: 0mA ≤ IOUT ≤ 7mA
Sinking: -7mA ≤ IOUT ≤ 0mA
TA = +25°C, VOUT tied to GND
ΔTA = +165°C
TYP
10
UNIT
µV/mA
µV/mA
mA
ΔVOUT/ΔIOUT
100
150
20
ISC
Short Circuit Current
40
ΔVOUT/ΔTA
ΔVOUT/Δt
Thermal Hysteresis (Note 14)
Long Term Stability (Note 15)
50
ppm
TA = +25°C
100
ppm
Electrical Specifications (ISL21007-20, V
= 2.048V) VIN = 3.0V, TA = -40°C to +125°C, unless otherwise specified.
OUT
Boldface limits apply over the operating temperature range, -40°C to +125°C.
MIN
MAX
PARAMETER
VIN
DESCRIPTION
Input Voltage Range
CONDITIONS
(Note 16)
TYP
(Note 16)
UNIT
V
2.7
5.5
VOUT
Output Voltage
Line Regulation
Load Regulation
2.048
50
V
ΔVOUT /ΔVIN
ΔVOUT/ΔIOUT
2.7V < VIN < 5.5V
200
100
150
µV/V
µV/mA
µV/mA
mA
Sourcing: 0mA ≤ IOUT ≤ 7mA
Sinking: -7mA ≤ IOUT ≤ 0mA
TA = +25°C, VOUT tied to GND
ΔTA = +165°C
10
20
ISC
Short Circuit Current
50
ΔVOUT/ΔTA
ΔVOUT/Δt
Thermal Hysteresis (Note 14)
Long Term Stability (Note 15)
50
ppm
ppm
TA = +25°C
75
Electrical Specifications (ISL21007-25, V
= 2.500V) VIN = 3.0V, TA = -40°C to +125°C, unless otherwise specified.
OUT
Boldface limits apply over the operating temperature range, -40°C to +125°C.
MIN
MAX
PARAMETER
VIN
DESCRIPTION
Input Voltage Range
CONDITIONS
(Note 16)
TYP
(Note 16)
UNIT
V
2.7
5.5
VOUT
Output Voltage
Line Regulation
Load Regulation
2.500
50
V
ΔVOUT /ΔVIN
ΔVOUT/ΔIOUT
2.7V < VIN < 5.5V
200
100
150
µV/V
µV/mA
µV/mA
mA
Sourcing: 0mA ≤ IOUT ≤ 5mA
Sinking: -5mA ≤ IOUT ≤ 0mA
TA = +25°C, VOUT tied to GND
ΔTA = +165°C
10
20
ISC
Short Circuit Current
50
ΔVOUT/ΔTA
ΔVOUT/Δt
Thermal Hysteresis (Note 14)
Long Term Stability (Note 15)
50
ppm
ppm
TA = +25°C
50
Electrical Specifications (ISL21007-30, V
= 3.000V) VIN = 5.0V, TA = -40°C to +125°C, unless otherwise specified.
OUT
Boldface limits apply over the operating temperature range, -40°C to +125°C.
MIN
MAX
PARAMETER
VIN
DESCRIPTION
Input Voltage Range
CONDITIONS
(Note 16)
TYP
(Note 16)
UNIT
V
3.2
5.5
VOUT
Output Voltage
Line Regulation
Load Regulation
3.000
50
V
ΔVOUT /ΔVIN
ΔVOUT/ΔIOUT
3.2V < VIN < 5.5V
200
100
150
µV/V
µV/mA
µV/mA
Sourcing: 0mA ≤ IOUT ≤ 7mA
Sinking: -7mA ≤ IOUT ≤ 0mA
10
20
FN6326.10
March 27, 2012
5
ISL21007
Electrical Specifications (ISL21007-30, V
= 3.000V) VIN = 5.0V, TA = -40°C to +125°C, unless otherwise specified.
OUT
Boldface limits apply over the operating temperature range, -40°C to +125°C. (Continued)
MIN
MAX
PARAMETER
ISC
DESCRIPTION
Short Circuit Current
CONDITIONS
TA = +25°C, VOUT tied to GND
ΔTA = +165°C
(Note 16)
TYP
50
(Note 16)
UNIT
mA
ΔVOUT/ΔTA
ΔVOUT/Δt
NOTES:
Thermal Hysteresis (Note 14)
Long Term Stability (Note 15)
50
ppm
ppm
TA = +25°C
50
13. Over the specified temperature range. Temperature coefficient is measured by the box method whereby the change in VOUT is divided by the
temperature range; in this case, -40°C to +125°C = +165°C.
14. Thermal Hysteresis is the change of VOUT measured at TA = +25°C after temperature cycling over a specified range, ΔTA. VOUT is read initially at
TA = +25°C for the device under test. The device is temperature cycled and a second VOUT measurement is taken at +25°C. The difference between
the initial VOUT reading and the second VOUT reading is then expressed in ppm. For Δ TA = +165°C, the device under test is cycled from +25°C to
+125°C to -40°C to +25°C.
15. Long term drift is logarithmic in nature and diminishes over time. Drift after the first 1000 hours will be approximately 10ppm/√(1kHrs).
16. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
FN6326.10
March 27, 2012
6
ISL21007
Typical Performance Curves (ISL21007-12) (REXT = 100kΩ)
95
90
85
80
75
70
65
60
120
100
80
60
40
20
0
UNIT 3
+125°C
UNIT 2
UNIT 1
+25°C
-40°C
2.5
3.0
3.5
4.0
4.5
(V)
5.0
5.5
6.0
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
V
V
IN
IN
FIGURE 2. IIN vs VIN (3 UNITS)
FIGURE 3. IIN vs VIN OVER TEMPERATURE
1.25015
1.25010
1.25005
1.25000
1.24995
1.24990
1.24985
1.24980
150
100
50
+125°C
UNIT 3
0
+25°C
-40°C
-50
UNIT 2
-100
-150
-200
-250
-300
UNIT 1
2.5
3.0
3.5
4.0
4.5
(V)
5.0
5.5
6.0
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
V
V
IN
IN
FIGURE 5. LINE REGULATION OVER TEMPERATURE
FIGURE 4. LINE REGULATION (3 UNITS)
0.15
1.25010
+125°C
+25°C
UNIT 1
1.25005
1.25000
1.24995
1.24990
1.24985
1.24980
1.24975
0.10
0.05
UNIT 2
0.00
-40°C
-0.05
-0.10
-0.15
UNIT 3
-40
-20
0
20
40
60
80
100 120 140
-7 -6 -5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
SINKING OUTPUT CURRENT (mA)
SOURCING
TEMPERATURE (°C)
FIGURE 6. LOAD REGULATION OVER TEMPERATURE
FIGURE 7. VOUT vs TEMPERATURE (3 UNITS)
FN6326.10
March 27, 2012
7
ISL21007
Typical Performance Curves (ISL21007-12) (REXT = 100kΩ) (Continued)
X: 200mV/DIV
Y: 10µs/DIV
0
10nF LOAD
100nF LOAD
-20
ΔV = +0.3V
IN
-40
-60
ΔV = -0.3V
1µF LOAD
1nF LOAD
NO LOAD
1.00E+02
IN
-80
-100
1.00E+00
1.00E+04
1.00E+0
FREQUENCY (Hz)
FIGURE 9. LINE TRANSIENT RESPONSE, NO CAPACITIVE LOAD
FIGURE 8. PSRR vs CAPACITIVE LOADS
X: 20µs/DIV
Y: 1V/DIV
X: 200mV/DIV
Y: 10µs/DIV
ΔV = +0.3V
IN
V
IN
V
= 1.25V
OUT
ΔV = -0.3V
IN
FIGURE 11. TURN-ON TIME
FIGURE 10. LINE TRANSIENT RESPONSE, 0.001µF LOAD
CAPACITANCE
GAIN IS x1000,
NOISE IS 4.5µV
P-P
140
1nF
10nF
NO LOAD
120
100
80
60
40
20
0
100nF
1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 1.00E+06
FREQUENCY (Hz)
FIGURE 12.
Z
OUT vs FREQUENCY
FIGURE 13. VOUT NOISE, 0.1Hz TO 10Hz
FN6326.10
March 27, 2012
8
ISL21007
Typical Performance Curves (ISL21007-12) (REXT = 100kΩ) (Continued)
NO OUTPUT CAPACITANCE
X: 50µs/DIV
Y: 1V/DIV
+7mA
-7mA
FIGURE 14. LOAD TRANSIENT RESPONSE
Typical Performance Curves (ISL21007-20) (REXT = 100kΩ)
95
90
85
80
75
70
65
95
90
85
80
75
70
65
60
55
50
UNIT 2
+125°C
-40°C
UNIT 1
+25°C
UNIT 3
3.5
2.7
3.1
3.5
3.9
V
4.3
(V)
4.7
5.1
5.5
2.7
3.1
3.9
4.3
(V)
4.7
5.1
5.5
V
IN
IN
FIGURE 15. IIN vs VIN (3 UNITS)
FIGURE 16. IIN vs VIN OVER TEMPERATURE
2.04815
2.04810
2.04805
2.04800
2.04795
2.04790
2.04815
-40°C
UNIT 2
2.04810
2.04805
2.04800
2.04795
+125°C
UNIT 1
+25°C
UNIT 3
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
V
V
IN
IN
FIGURE 17. LINE REGULATION (3 UNITS)
FIGURE 18. LINE REGULATION OVER TEMPERATURE
FN6326.10
March 27, 2012
9
ISL21007
Typical Performance Curves (ISL21007-20) (REXT = 100kΩ) (Continued)
2.0496
2.0492
2.0488
2.0484
2.0480
2.0476
2.0472
1.6
1.2
+125°C
0.0
0.4
UNIT 2
UNIT 1
-40°C
0.0
-0.4
-0.8
-1.2
+25°C
UNIT 3
-7 -6 -5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
-40 -25 -10
5
20 35 50 65 80 95 110 125
TEMPERATURE (°C)
SINKING OUTPUT CURRENT (mA)
SOURCING
FIGURE 19. LOAD REGULATION OVER TEMPERATURE
FIGURE 20. VOUT vs TEMPERATURE (3 UNITS)
X: 200mV/DIV
Y: 10µs/DIV
0
10nF LOAD
100nF LOAD
-20
ΔV = +0.3V
IN
-40
1µF LOAD
-60
ΔV = -0.3V
IN
-80
NO LOAD
-100
1.0E+01
1.0E+03
1.0E+05
FREQUENCY (Hz)
FIGURE 21. PSRR vs CAPACITIVE LOADS
FIGURE 22. LINE TRANSIENT RESPONSE, NO CAPACITIVE LOAD
X: 200mV/DIV
Y: 10µs/DIV
X: 100µs/DIV
Y: 2V/DIV
ΔV = +0.3V
IN
V
IN
V
= 2.048V
OUT
ΔV = -0.3V
IN
FIGURE 23. LINE TRANSIENT RESPONSE, 0.001µF LOAD
CAPACITANCE
FIGURE 24. TURN-ON TIME
FN6326.10
March 27, 2012
10
ISL21007
Typical Performance Curves (ISL21007-20) (REXT = 100kΩ) (Continued)
GAIN IS x1000,
NOISE IS 4.5µV
P-P
140
120
100
80
1nF
10nF
NO LOAD
100nF
60
40
20
0
1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 1.00E+06
FREQUENCY (Hz)
FIGURE 25. ZOUT VS FREQUENCY
FIGURE 26. VOUT NOISE, 0.1Hz TO 10Hz
X: 20µs/DIV
Y: 200mV/DIV
+7mA
X: 20µs/DIV
Y: 200mV/DIV
+7mA
-7mA
-7mA
FIGURE 27. LOAD TRANSIENT RESPONSE, 0.001µF LOAD
CAPACITANCE
FIGURE 28. LOAD TRANSIENT RESPONSE, NO CAPACITIVE LOAD
Typical Performance Curves (ISL21007-25) (REXT = 100kΩ)
100
95
90
85
80
75
70
65
60
120
100
80
60
40
20
0
UNIT 3
+125°C
UNIT 2
UNIT 1
+25°C
-40°C
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
V
V
(V)
IN
IN
FIGURE 29. IIN vs VIN (3 UNITS)
FIGURE 30. IIN vs VIN OVER TEMPERATURE
FN6326.10
March 27, 2012
11
ISL21007
Typical Performance Curves (ISL21007-25) (REXT = 100kΩ) (Continued)
2.5002
2.5001
2.5000
2.4999
2.4998
2.4997
2.4996
100
50
UNIT 1
0
-50
+25°C
UNIT 2
-100
-150
-200
-250
-300
-350
-400
+125°C
UNIT 3
-40°C
2.5
3.0
3.5
4.0
(V)
4.5
5.0
5.5
2.5
3.0
3.5
4.0
4.5
(V)
5.0
5.5
6.0
V
V
IN
IN
FIGURE 31. LINE REGULATION (3 UNITS)
FIGURE 32. LINE REGULATION OVER TEMPERATURE
2.5003
0.6
0.4
0.2
0
UNIT 2
+125°C
2.5002
2.5001
2.5000
2.4999
2.4998
2.4997
2.4996
2.4995
2.4994
2.4993
-40°C
UNIT 1
+25°C
-0.2
-0.4
-0.6
-0.8
-1.0
UNIT 3
80
-40
-20
0
20
40
60
100 120 140
-7 -6 -5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
TEMPERATURE (°C)
SINKING OUTPUT CURRENT (mA)
SOURCING
FIGURE 33. LOAD REGULATION OVER TEMPERATURE
FIGURE 34. VOUT vs TEMPERATURE (3 UNITS)
X: 200mV/DIV
Y: 10µs/DIV
10
NO LOAD
1nF
0
ΔV = +0.3V
IN
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
10nF
100nF
1µF
ΔV = -0.3V
IN
1.E+00
1.E+02
1.E+04
1.E+06
FREQUENCY (Hz)
FIGURE 35. PSRR vs CAPACITIVE LOADS
FIGURE 36. LINE TRANSIENT RESPONSE, NO CAPACITIVE LOAD
FN6326.10
March 27, 2012
12
ISL21007
Typical Performance Curves (ISL21007-25) (REXT = 100kΩ) (Continued)
X: 200mV/DIV
Y: 10µs/DIV
X: 20µs/DIV
Y: 1V/DIV
ΔV = +0.3V
IN
V
IN
V
= 2.5V
ΔV = -0.3V
OUT
IN
FIGURE 37. LINE TRANSIENT RESPONSE, 0.001µF LOAD
CAPACITANCE
FIGURE 38. TURN-ON TIME
GAIN IS x1000,
NOISE IS 4.5µV
P-P
140
1nF
10nF
NO LOAD
120
100
80
60
40
20
0
100nF
1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 1.00E+06
FREQUENCY (Hz)
FIGURE 39. Z
vs FREQUENCY
FIGURE 40. VOUT NOISE, 0.1Hz TO 10Hz
OUT
NO OUTPUT CAPACITANCE
X: 50µs/DIV
Y: 500mV/DIV
+5mA
-5mA
FIGURE 41. LOAD TRANSIENT RESPONSE
FN6326.10
March 27, 2012
13
ISL21007
Typical Performance Curves (ISL21007-30) (REXT = 100kΩ)
120
100
80
60
40
20
0
120
100
80
60
40
20
0
UNIT 2
+125°C
UNIT 3
UNIT 1
+25°C
-40°C
3.2
3.7
4.2
V
4.7
5.2
3.2
3.7
4.2
V
4.7
5.2
(V)
(V)
IN
IN
FIGURE 42. IIN vs VIN (3 UNITS)
FIGURE 43. IIN vs VIN OVER TEMPERATURE
3.0005
2.9995
2.9985
2.9975
2.9965
2.9955
3.001
UNIT 1
3.000
2.999
2.998
2.997
2.996
2.995
2.994
UNIT 2
UNIT 3
+125°C
+25°C
-40°C
3.2
3.6
4.0
4.4
(V)
4.8
5.2
5.6
3.2
3.6
4.0
4.4
4.8
5.2
5.6
V
V
(V)
IN
IN
FIGURE 44. LINE REGULATION (3 UNITS)
FIGURE 45. LINE REGULATION OVER TEMPERATURE
0.10
3.0006
3.0004
0.05
0.00
-40°C
+25°C
3.0002
UNIT 3
3.0000
-0.05
-0.10
-0.15
-0.20
-0.25
UNIT 2
2.9998
+125°C
2.9996
UNIT 1
2.9994
2.9992
2.9990
-7 -6 -5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
-40 -25 -10
5
20 35 50 65 80 95 110 125
TEMPERATURE (°C)
SINKING
LOAD (mA)
SOURCING
FIGURE 46. LOAD REGULATION OVER TEMPERATURE
FIGURE 47. VOUT vs TEMPERATURE (3 UNITS)
FN6326.10
March 27, 2012
14
ISL21007
Typical Performance Curves (ISL21007-30) (REXT = 100kΩ) (Continued)
X: 200mV/DIV
Y: 10µs/DIV
10
NO LOAD
V
V
(DC) = 5.0V
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
ΔV = +0.5V
IN
IN
IN
1nF
10nF
100nF
(AC) = 50mV
P-P
1µF
ΔV = -0.5V
IN
1.E+00
1.E+02
1.E+04
1.E+06
FREQUENCY (Hz)
FIGURE 48. PSRR vs CAPACITIVE LOADS
FIGURE 49. LINE TRANSIENT RESPONSE, NO CAPACITIVE LOAD
X: 200mV/DIV
Y: 10µs/DIV
V
= 5.0V
IN
ΔV = +0.5V
IN
V
= 3.0V
OUT
ΔV = -0.5V
IN
20µs/DIV
FIGURE 51. TURN-ON TIME
FIGURE 50. LINE TRANSIENT RESPONSE, 0.001µF LOAD
CAPACITANCE
GAIN IS x1000,
NOISE IS 4.5µV
P-P
140
1nF
10nF
NO LOAD
120
100
80
60
40
20
0
100nF
1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 1.00E+06
FREQUENCY (Hz)
FIGURE 52. Z
vs FREQUENCY
FIGURE 53. VOUT NOISE, 0.1Hz TO 10Hz
OUT
FN6326.10
March 27, 2012
15
ISL21007
Typical Performance Curves (ISL21007-30) (REXT = 100kΩ) (Continued)
+7mA
-7mA
100µs/DIV
FIGURE 54. LOAD TRANSIENT RESPONSE
max temperature profile should not be exceeded. Expect up to
1mV drift from the solder reflow process.
Applications Information
FGA Technology
FGA references are susceptible to excessive X-radiation like that
used in PC board manufacturing. Initial accuracy can change
10mV or more under extreme radiation. If an assembled board
needs to be X-rayed, care should be taken to shield the FGA
reference device.
The ISL21007 voltage reference uses floating gate technology to
create references with very low drift and supply current.
Essentially, the charge stored on a floating gate cell is set
precisely in manufacturing. The reference voltage output itself is
a buffered version of the floating gate voltage. The resulting
reference device has excellent characteristics which are unique
in the industry: very low temperature drift, high initial accuracy,
and almost zero supply current. Also, the reference voltage itself
is not limited by voltage bandgaps or zener settings, so a wide
range of reference voltages can be programmed (standard
voltage settings are provided, but customer-specific voltages are
available).
Board Mounting Considerations
For applications requiring the highest accuracy, board mounting
location should be reviewed. Placing the device in areas subject to
slight twisting can cause degradation of the accuracy of the
reference voltage due to die stresses. It is normally best to place the
device near the edge of a board, or the shortest side, as the axis of
bending is most limited at that location. Obviously, mounting the
device on flexprint or extremely thin PC material will likewise cause
loss of reference accuracy.
The process used for these reference devices is a floating gate
CMOS process, and the amplifier circuitry uses CMOS transistors
for amplifier and output transistor circuitry. While providing
excellent accuracy, there are limitations in output noise level and
load regulation due to the MOS device characteristics. These
limitations are addressed with circuit techniques discussed in
other sections.
Board Assembly Considerations
FGA references provide high accuracy and low temperature drift
but some PC board assembly precautions are necessary. Normal
Output voltage shifts of 100µV to 1mV can be expected with
Pb-free reflow profiles or wave solder on multi-layer FR4 PC
boards. Precautions should be taken to avoid excessive heat or
extended exposure to high reflow or wave solder temperatures,
this may reduce device initial accuracy.
Micropower Operation
The ISL21007 consumes extremely low supply current due to the
proprietary FGA technology. Low noise performance is achieved
using optimized biasing techniques. Supply current is typically
75µA and noise is 4.5µVP-P benefitting precision, low noise
portable applications such as handheld meters and instruments.
Post-assembly x-ray inspection may also lead to permanent
changes in device output voltage and should be minimized or
avoided. If x-ray inspection is required, it is advisable to monitor
the reference output voltage to verify excessive shift has not
occurred. If large amounts of shift are observed, it is best to add
an X-ray shield consisting of thin zinc (300µm) sheeting to allow
clear imaging, yet block x-ray energy that affects the FGA
reference.
Data Converters in particular can utilize the ISL21007 as an
external voltage reference. Low power DAC and ADC circuits will
realize maximum resolution with lowest noise.
Handling and Board Mounting
FGA references provide excellent initial accuracy and low
temperature drift at the expense of very little power drain. There
are some precautions to take to insure this accuracy is not
compromised. Excessive heat during solder reflow can cause
excessive initial accuracy drift, so the recommended +260°C
Special Applications Considerations
In addition to post-assembly examination, there are also other X-
ray sources that may affect the FGA reference long term
accuracy. Airport screening machines contain X-rays and will
FN6326.10
March 27, 2012
16
ISL21007
have a cumulative effect on the voltage reference output
Turn-On Time
accuracy. Carry-on luggage screening uses low level X-rays and is
not a major source of output voltage shift, however, if a product is
expected to pass through that type of screening over 100 times,
it may need to consider shielding with copper or aluminum.
Checked luggage X-rays are higher intensity and can cause
output voltage shift in much fewer passes, thus devices expected
to go through those machines should definitely consider
The ISL21007 devices have low supply current and thus the time
to bias up internal circuitry to final values will be longer than with
higher power references. Normal turn-on time is typically 120µs.
This is shown in Figure 10. Circuit design must take this into
account when looking at power-up delays or sequencing.
Temperature Coefficient
shielding. Note that just two layers of 1/2 ounce copper planes
will reduce the received dose by over 90%. The leadframe for the
device which is on the bottom also provides similar shielding.
The limits stated for temperature coefficient (tempco) are governed
by the method of measurement. The overwhelming standard for
specifying the temperature drift of a reference is to measure the
reference voltage at two temperatures, take the total variation,
(VHIGH – VLOW), and divide by the temperature extremes of
measurement (THIGH – TLOW). The result is divided by the nominal
reference voltage (at T = +25°C) and multiplied by 106 to yield
ppm/°C. This is the “Box” method for specifying temperature
coefficient.
If a device is expected to pass through luggage X-ray machines
numerous times, it is advised to mount a 2-layer (minimum) PC
board on the top, along with a ground plane underneath, which will
effectively shield it from 50 to 100 passes through the machine.
Since these machines vary in X-ray dose delivered, it is difficult to
produce an accurate maximum pass recommendation.
Noise Performance and Reduction
Output Voltage Adjustment
The output noise voltage in a 0.1Hz to 10Hz bandwidth is typically
4.5µVP-P. The noise measurement is made with a bandpass filter
made of a 1-pole high-pass filter with a corner frequency at 0.1Hz
and a 2-pole low-pass filter with a corner frequency at 12.6Hz to
create a filter with a 9.9Hz bandwidth. Noise in the 10kHz to 1MHz
bandwidth is approximately 40µVP-P with no capacitance on the
output. This noise measurement is made with a 2 decade
bandpass filter made of a 1-pole high-pass filter with a corner
frequency at 1/10 of the center frequency and 1-pole low-pass
filter with a corner frequency at 10 times the center frequency.
Load capacitance up to 1000pF can be added but will result in
only marginal improvements in output noise and transient
response. The output stage of the ISL21007 is not designed to
drive heavily capacitive loads, so for load capacitances above
0.001µF, the noise reduction network shown in Figure 55 is
recommended. This network reduces noise significantly over the
full bandwidth. Noise is reduced to less than 20µVP-P from 1Hz to
1MHz using this network with a 0.01µF capacitor and a 2kΩ
resistor in series with a 10µF capacitor. Also, transient response is
improved with higher value output capacitor. The 0.01µF value can
be increased for better load transient response with little sacrifice
in output stability.
The output voltage can be adjusted up or down by 2.5% by placing a
potentiometer from VOUT to ground, and connecting the wiper to the
TRIM pin. The TRIM input is high impedance, so no series resistance
is needed. The resistor in the potentiometer should be a low tempco
(<50ppm/°C) and the resulting voltage divider should have very low
tempco <5ppm/°C. A digital potentiometer such as the ISL95810
provides a low tempco resistance and excellent resistor and tempco
matching for trim applications. See Figure 59 and TB473 for further
information.
V
= 5.0V
IN
V
10µF
IN
V
O
0.1µF
ISL21007
GND
2kΩ
0.01µF
10µF
FIGURE 55. HANDLING HIGH LOAD CAPACITANCE
FN6326.10
March 27, 2012
17
ISL21007
Typical Application Circuits
V
= +5.0V
IN
R = 200Ω
2N2905
V
IN
V
2.5V/50mA
OUT
ISL21007
V
= 2.500V
OUT
0.001µF
GND
FIGURE 56. PRECISION 2.500V 50mA REFERENCE
+2.7 TO 5.5V
0.1µF
10µF
V
IN
V
OUT
ISL21007-25
V
= 2.500V
OUT
GND
0.001µF
V
R
CC
V
H
OUT
X9119
SDA
SCL
(UNBUFFERED)
+
–
2-WIRE BUS
EL8178
V
OUT
(BUFFERED)
V
R
L
SS
FIGURE 57. 2.500V FULL SCALE LOW-DRIFT, LOW NOISE, 10-BIT ADJUSTABLE VOLTAGE SOURCE
+2.7 TO 5.5V
0.1µF
10µF
V
IN
EL8178
+
–
V
SENSE
OUT
V
OUT
ISL21007-12
GND
LOAD
FIGURE 58. KELVIN SENSED LOAD
FN6326.10
March 27, 2012
18
ISL21007
Typical Application Circuits(Continued)
10µF
+2.7 TO 5.5V
0.1µF
V
2.5V ±2.5%
IN
V
OUT
ISL21007-12
TRIM
GND
R
V
H
CC
SDA
SCL
I2C BUS
ISL95810
R
L
V
SS
FIGURE 59. OUTPUT ADJUSTMENT USING THE TRIM PIN
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6326.10
March 27, 2012
19
ISL21007
Package Outline Drawing
M8.15
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
Rev 4, 1/12
DETAIL "A"
1.27 (0.050)
0.40 (0.016)
INDEX
AREA
6.20 (0.244)
5.80 (0.228)
0.50 (0.20)
x 45°
0.25 (0.01)
4.00 (0.157)
3.80 (0.150)
8°
0°
1
2
3
0.25 (0.010)
0.19 (0.008)
SIDE VIEW “B”
TOP VIEW
2.20 (0.087)
1
8
SEATING PLANE
0.60 (0.023)
1.27 (0.050)
1.75 (0.069)
5.00 (0.197)
4.80 (0.189)
2
3
7
6
1.35 (0.053)
-C-
4
5
0.25(0.010)
0.10(0.004)
1.27 (0.050)
0.51(0.020)
0.33(0.013)
5.20(0.205)
SIDE VIEW “A
TYPICAL RECOMMENDED LAND PATTERN
NOTES:
1. Dimensioning and tolerancing per ANSI Y14.5M-1994.
2. Package length does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
3. Package width does not include interlead flash or protrusions. Interlead
flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.
4. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
5. Terminal numbers are shown for reference only.
6. The lead width as measured 0.36mm (0.014 inch) or greater above the
seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch).
7. Controlling dimension: MILLIMETER. Converted inch dimensions are not
necessarily exact.
8. This outline conforms to JEDEC publication MS-012-AA ISSUE C.
FN6326.10
March 27, 2012
20
相关型号:
ISL21007BFB830Z-TK
1-OUTPUT THREE TERM VOLTAGE REFERENCE, 3V, PDSO8, ROHS COMPLIANT, PLASTIC, MS-012AA, SOIC-8
RENESAS
ISL21007BFB830ZT
1-OUTPUT THREE TERM VOLTAGE REFERENCE, 3V, PDSO8, ROHS COMPLIANT, MS-012AA, SOIC-8
RENESAS
ISL21007CFB812Z
Precision, Low Noise FGA™ Voltage References; SOIC8; Temp Range: -40° to 125°C
RENESAS
ISL21007CFB820Z-TK
Precision, Low Noise FGA™ Voltage References; SOIC8; Temp Range: -40° to 125°C
RENESAS
©2020 ICPDF网 联系我们和版权申明