HVM12/1 [PHOENIX]
Modular Terminal Block;
| 型号： | HVM12/1 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Modular Terminal Block 端子和端子排 |
| 文件： | 总10页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
High Current Connectors, Connection method: Bolt connection, Cross section: 6 mm² - 120 mm²,
AWG: 10 - 250 kcmil, Width: 32 mm, Height: 73.5 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Why buy this product
Comprehensive, supplementary accessories
■
■
For connecting up to four conductors
Key Commercial Data
Packing unit
10 STK
GTIN
Weight per Piece (excluding packing)
Custom tariff number
98.27 g
85369010
Germany
Country of origin
Technical data
General
Number of levels
1
Number of connections
Nominal cross section
Color
1
120 mm²
gray
Insulating material
PA
Flammability rating according to UL 94
Rated surge voltage
Degree of pollution
V0
8 kV
3
Overvoltage category
Insulating material group
Connection in acc. with standard
Nominal current IN
III
I
IEC 60947-7-1
269 A
Maximum load current
Nominal voltage UN
269 A
1000 V
No
Open side panel
Result of surge voltage test
Test passed
08/11/2016 Page 1 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Technical data
General
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Power frequency withstand voltage setpoint
Test passed
2.2 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of tight fit on support
Tight fit on carrier
Test passed
NS 35
Setpoint
15 N
Result of voltage-drop test
Requirements, voltage drop
Result of temperature-rise test
Result of thermal test
Test passed
≤ 3.2 mV
Test passed
Test passed
Proof of thermal characteristics (needle flame) effective duration
Oscillation, broadband noise test result
Test specification, oscillation, broadband noise
Test spectrum
10 s
Test passed
DIN EN 50155 (VDE 0115-200):2008-03
Service life test category 1, class B, body mounted
f1 = 5 Hz to f2 = 150 Hz
Test frequency
ASD level
0.02 g²/Hz
Acceleration
0,8 g
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
Shock form
DIN EN 50155 (VDE 0115-200):2008-03
Half-sine
Acceleration
5 g
Shock duration
30 ms
Number of shocks per direction
Test directions
3
X-, Y- and Z-axis (pos. and neg.)
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
125 °C
Static insulating material application in cold
Behavior in fire for rail vehicles (DIN 5510-2)
Flame test method (DIN EN 60695-11-10)
Oxygen index (DIN EN ISO 4589-2)
-60 °C
Test passed
V0
>32 %
2
NF F16-101, NF F10-102 Class I
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Calorimetric heat release NFPA 130 (ASTM E 1354)
passed
passed
passed
27,5 MJ/kg
08/11/2016 Page 2 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
Dimensions
Length
67 mm
Width
32 mm
Height
73.5 mm
76 mm
Height NS 35/7,5
Height NS 35/15
Bolt length
83.5 mm
40.5 mm
Connection data
Conductor cross section solid min.
Conductor cross section solid max.
Conductor cross section flexible min.
Conductor cross section flexible max.
Conductor cross section AWG min.
Conductor cross section AWG max.
Cable lug connection according to standard
Min. cross section for cable lug connection
Max. cross section for cable lug connection
Bolt length
6 mm²
120 mm²
6 mm²
120 mm²
10
250 kcmil
DIN 46234
6 mm²
120 mm²
40.5 mm
12 mm
14 Nm
Bolt diameter
Tightening torque, min
Tightening torque max
31 Nm
Cable lug connection according to standard
Min. cross section for cable lug connection
Max. cross section for cable lug connection
Bolt length
DIN 46235
10 mm²
95 mm²
40.5 mm
12 mm
14 Nm
Bolt diameter
Tightening torque, min
Tightening torque max
31 Nm
Cable lug connection according to standard
Bolt length
DIN 46237
40.5 mm
12 mm
14 Nm
Bolt diameter
Tightening torque, min
Tightening torque max
31 Nm
Screw thread
M12
Tightening torque, min
14 Nm
Tightening torque max
31 Nm
08/11/2016 Page 3 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Technical data
Connection data
Connection method
Bolt connection
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
V0
Flammability rating according to UL 94
Classifications
eCl@ss
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27141120
27141120
27141120
27141120
27141120
27141120
27141120
27141120
ETIM
ETIM 2.0
ETIM 3.0
ETIM 4.0
ETIM 5.0
EC000897
EC000897
EC000897
EC000897
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
30211811
39121410
39121410
39121410
39121410
UNSPSC 12.01
UNSPSC 13.2
Approvals
Approvals
Approvals
CSA / CSAus / EAC / EAC / cCSAus
Ex Approvals
08/11/2016 Page 4 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Approvals
Approvals submitted
Approval details
CSA
mm²/AWG/kcmil
00
Nominal current IN
Nominal voltage UN
220 A
1000 V
CSAus
mm²/AWG/kcmil
00
Nominal current IN
Nominal voltage UN
220 A
1000 V
EAC
EAC
cCSAus
Accessories
Accessories
Bridge
Connection element - HV M12/1-VS 2 - 3049631
Connection element, Number of positions: 2, Color: silver
08/11/2016 Page 5 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Accessories
Connection element - HV M12/1-VS 3 - 3049644
Connection element, Number of positions: 3, Color: silver
Cover profile
Cover profile - HV M10/1-AP - 3049495
Cover profile, for single-bolt terminal block M10, Length: 156 mm, Width: 32 mm, Height: 6.5 mm, Color: gray
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
08/11/2016 Page 6 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Accessories
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
08/11/2016 Page 7 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
End block
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10
mm, color: aluminum
Labeled terminal marker
Warning label - WS-4K - 1004584
Adhesive warning plate, self-adhesive, black print: lightning flash with mixed verson - "Vorsicht Spannung - Attention
Danger" size of label: 13 x 23.5 mm
Warning label - WS-2K - 1004513
Adhesive warning plate, self-adhesive, black print: lightning flash with mixed verson - "Vorsicht Spannung - Attention
Danger" size of label: 32 x 26 mm
Zack marker strip - ZB 12 CUS - 0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
08/11/2016 Page 8 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Accessories
Marker for terminal blocks - ZB 12,LGS:L1-N,PE - 0812146
Marker for terminal blocks, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall
marker groove, for terminal block width: 12.2 mm, Lettering field: 10.5 x 12.15 mm
Marker for terminal blocks - UC-TM 12 CUS - 0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 CUS - 0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 10.8 x 9.6 mm
Partition plate
Separating plate - HV M12/2-TP - 3049709
Separating plate, Length: 156 mm, Width: 2 mm, Color: gray
Terminal marking
Zack marker strip - ZB 12:UNPRINTED - 0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 12.2 mm, Lettering field: 12 x 10.5 mm
08/11/2016 Page 9 / 10
https://www.phoenixcontact.com/in/products/3049505
High Current Connectors - HV M12/1 - 3049505
Accessories
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED,
Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 12 mm, Lettering field: 11.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for terminal block width: 12 mm,
Lettering field: 10.8 x 9.6 mm
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
08/11/2016 Page 10 / 10
相关型号：
©2020 ICPDF网 联系我们和版权申明