CLC034MAX [NSC]
IC,CABLE EQUALIZER,SOP,16PIN,PLASTIC;
| 型号： | CLC034MAX |
| 厂家： | 
National Semiconductor |
| 描述： | IC,CABLE EQUALIZER,SOP,16PIN,PLASTIC |
| 文件： | 总6页 (文件大小：462K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRELIMINARY
February 2005
CLC034
SMPTE 292M / 259M Adaptive Cable Equalizer
General Description
Features
n SMPTE 292M, SMPTE 344M and SMPTE 259M
compliant
The CLC034 SMPTE 292M / 259M adaptive cable equalizer
is a monolithic integrated circuit for equalizing data transmit-
ted over cable (or any media with similar dispersive loss
characteristics). The equalizer operates over a wide range of
data rates from 143 Mbps to 1.485 Gbps and supports
SMPTE 292M, SMPTE 344M and SMPTE 259M.
n Supports DVB-ASI at 270Mbps
n High data rates: 143 Mbps to 1.485 Gbps
n Equalizes up to 140 meters of Belden 1694A at 1.485
Gbps or up to 350 meters of Belden 1694A at 270 Mbps
n Manual bypass, cable length indicator, and output mute
with a programmable threshold
n Single-ended or differential input
n 50Ω differential outputs
The CLC034 implements DC restoration to correctly handle
pathological data conditions. DC restoration can be by-
passed for low data rate applications. The equalizer is flex-
ible in allowing either single-ended or differential input drive.
Additional features include a combined carrier detect and
output mute pin which mutes the output when no signal is
present. A programmable mute reference is used to mute the
output at a selectable level of signal degradation. A cable
length indicator is provided to determine the amount of cable
being equalized.
n Single 3.3V supply operation
n Replaces the GS1524
Applications
n SMPTE 292M, SMPTE 344M, and SMPTE 259M serial
digital interfaces
Typical Application
20085901
© 2005 National Semiconductor Corporation
DS200859
www.national.com
Absolute Maximum Ratings (Note 1)
Input Coupling Capacitance
1.0 µF
720 to 880 mVP-P
0˚C to +70˚C
Cable Input Voltage Swing (Note 5)
Operating Free Air Temperature (TA)
Supply Voltage
−0.5V to 3.6V
Input Voltage (all inputs)
ESD Rating (HBM)
−0.3V to VCC+0.3V
2kV
Recommended Operating
Conditions
Supply Voltage (VCC – VEE
)
3.3V 5%
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Notes 2, 3).
Symbol Parameter
Conditions
Reference
Min
Typ
Max
Units
VCMIN
VSDI
Input Common Mode Voltage
Input Voltage Swing
SDI, SDI
1.75
V
0m cable length, differential,
(Note 6)
720
800
950
mVP−P
V
VCMOUT Output Common Mode Voltage
SDO, SDO
VCC
VSDO/2
750
–
VSDO
Output Voltage Swing
CLI DC Voltage
50Ω load, differential
0m cable
mVP-P
CLI
2.5
V
V
no signal
1.9
MUTEREF DC Voltage (floating)
MUTEREF Range
MUTEREF
CD/MUTE
1.3
V
0.69
V
CD/MUTE Output Voltage
Carrier not present
Carrier present
2.6
3.0
V
1.2
V
CD/MUTE Input Voltage
Supply Current
Min to mute outputs
Max to force outputs active
V
2.0
90
V
ICC
80
mA
www.national.com
2
AC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3).
Symbol Parameter
BRSDI Input Data Rate
Conditions
Reference
Min
Typ
Max
Units
SDI, SDI
143
1485
Mbps
Maximum Equalized Cable
Length (with equalizer
pathological)
270Mbps, Belden 1694A,
0.2UI output jitter
350
280
140
m
m
m
m
270Mbps, Belden 8281,
0.2UI output jitter
1.485Gbps, Belden 1694A,
0.25UI output jitter
1.485Gbps, Belden 8281,
0.25UI output jitter
100
80
tr,tf
Output Rise Time, Fall Time
Mismatch in Rise/Fall Time
Output Overshoot
20% – 80%
SDO, SDO
SDI, SDI
220
30
ps
ps
%
tOS
Note 4
10
ROUT
RLIN
RIN
Output Resistance
single-ended
50
18-20
TBD
1
Ω
Input Return Loss
15
dB
kΩ
pF
Input Resistance
single-ended
single-ended
CIN
Input Capacitance
Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of
these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics"
specifies acceptable device operating conditions.
Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to V = 0 Volts.
EE
Note 3: Typical values are stated for V
= +3.3V and T = +25˚C.
A
CC
Note 4: Specification is guaranteed by design.
Note 5: These specifications assume and 800 mV
signal at the cable input. Levels above and below 800 mV are allowable, but performance may vary. The cable
P-P
will attenuate the signal prior to entering the equalizer.
Note 6: The maximum input voltage swing of 950 mV
assumes a nonstressing, DC-balance signal; specifically, the SMPTE-recommended color bar test signal.
P-P
Pathological or other stressing signals may not be used. This specification is for 0m cable only.
3
www.national.com
Connection Diagram
20085903
16-Pin SOIC
Order Number CLC034MA
See NS Package Number M16A
Pin Descriptions
Pin #
Name
Description
1
CLI
VCC
VEE
SDI
SDI
VEE
Cable length indicator. Provides a voltage proportional to the cable length being equalized.
Positive power supply (+3.3V).
2
3
Negative power supply (ground).
4
Serial data true input.
5
Serial data complement input.
6
Negative power supply (ground).
7
AEC+
AEC-
AEC loop filter external capacitor (1µF) positive connection.
AEC loop filter external capacitor (1µF) negative connection.
Bypasses equalization and DC restoration when high. No equalization occurs in this mode.
MUTE Reference. Determines the maximum cable to be equalized before muting.
Negative power supply (ground).
8
9
BYPASS
MUTEREF
VEE
10
11
12
13
14
15
16
SDO
Serial data complement output.
SDO
Serial data true output.
VEE
Negative power supply (ground).
VCC
Positive power supply (+3.3V).
CD/MUTE
Bi-directional carrier detect and output mute. CD/MUTE is high when no signal is present. If
unconnected, MUTE is controlled by the MUTEREF setting. To force MUTE on, tie to VCC. To
disable MUTE, tie to GND. CD/MUTE has no function in BYPASS mode.
www.national.com
4
Block Diagram
20085902
Mute is forced off if this pin is tied to ground, and the outputs
Device Operation
will always mute if this pin is tied to VCC
.
The loop response in the AEC block is controlled by an
external 1µF capacitor placed across the AEC+ and AEC-
pins.
BLOCK DESCRIPTION
The Equalizer block is a multi-stage adaptive filter. If Bypass
is high, the equalizer is disabled.
The DC Restore block receives the differential signals from
the equalizer filter block. This block incorporates a self-
biasing DC restore circuit to fully DC restore the signals. If
Bypass is high, this function is disabled.
INPUT INTERFACING
The CLC034 accepts either differential or single-ended in-
put. The input must be AC coupled. Transformer coupling is
not supported.
The Output block produces SDO and SDO.
The CLC034 correctly handles equalizer pathological signals
for standard definition and high definition serial digital video,
as described in SMPTE RP 178 and RP 198, respectively.
The Cable Length Indicator provides a voltage to indicate
the length of cable being equalized.
The Mute Reference determines the amount of cable to
equalize before muting the outputs. This is set by applying a
voltage proportional to the required length of cable. The
higher the voltage, the lower the mute threshold.
OUTPUT INTERFACING
The SDO and SDO outputs are internally loaded with 50Ω.
They produce
a 750 mVP-P differential output, or a
Carrier Detect / Mute is bi-directional, serving two pur-
poses. As an output, carrier detect monitors the signal power
out of the equalizing filter and compares it to the mute
reference to determine if a valid signal is present. Carrier
detect provides a high voltage when no signal is present.
Mute can be forced on or off by using this pin as an input.
375 mVP-P single-ended output.
REPLACING THE GENNUM GS1524
The CLC034 is form-fit-function compatible with the Gennum
GS1524.
5
www.national.com
Physical Dimensions inches (millimeters)
unless otherwise noted
16-Pin SOIC
Order Number CLC034MA
NS Package Number M16A
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
National Semiconductor
Americas Customer
Support Center
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
National Semiconductor
Asia Pacific Customer
Support Center
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: new.feedback@nsc.com
Tel: 1-800-272-9959
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
Email: ap.support@nsc.com
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
www.national.com
相关型号：
CLC035-093C1
This product (COB) is comprised of two different CCTs, and is to be driven using the 2 terminals which are shown in Page 5
CITIZEN
CLC035-093C1-313H3H3-185
This product (COB) is comprised of two different CCTs, and is to be driven using the 2 terminals which are shown in Page 5
CITIZEN
©2020 ICPDF网 联系我们和版权申明