MSK198KRHL [MSK]
Operational Amplifier, 2 Func, 1100uV Offset-Max, CQCC16, HERMETIC SEALED, CERAMIC, LCC-16;
| 型号： | MSK198KRHL |
| 厂家： | 
M.S. KENNEDY CORPORATION |
| 描述： | Operational Amplifier, 2 Func, 1100uV Offset-Max, CQCC16, HERMETIC SEALED, CERAMIC, LCC-16 |
| 文件： | 总6页 (文件大小：682K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MIL-PRF-38534 CERTIFIED FACILITY
RAD HARD
DUAL PRECISION
OP-AMP
198RHL
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
(315) 701-6751
FEATURES:
Manufactured using
Space Qualified RH1498 Die
MIL-PRF-38534 Class K Processing & Screening
Total Dose Tested to TBD Krads(Si) (Method 1019.7 Condition A)
Rail - to - Rail Input and Output
800μV Max Vos from V+ to V-
Gain - Bandwidth Prduct: 10MHz
Slew Rate: 6V/uS Typical
Low Supply Current per Amplifier: 1.7mA
Stable for Capacitive Loads Up to 10,000pF
Large Output Drive Current: 30mA
Wide Supply Range: 4.5V to ±15V
Contact MSK for MIL-PRF-38534, Qualification and Radiation Status
DESCRIPTION:
The MSK 198RHL is a radiation hardened dual operational amplifier for use in space and severe military applications.
This device offers rail-to-rail input and output, 10MHz gain-bandwidth product and 6V/uS slew rate. With a wide supply
range of 4.5V to ±15V and drive current to 30mA, these op amps remain stable while driving capacitve loads up to
10,000pF. The MSK 198RHL is an ideal solution when multiple robust precision amplifiers are required and board space
is at a premium. The hermetically sealed MSK 198RHL is offered in a leadless ceramic chip carrier package for surface
mount applications.
PIN-OUT INFORMATION
EQUIVALENT SCHEMATIC
1 OUT A
2 NC
3 -IN A
4 NC
5 +IN A
6 NC
7 V-
8 NC
9 +IN B
10 NC
11 -IN B
12 NC
13 OUT B
14 NC
15 V+
16 NC
CASE=ISOLATED
TYPICAL APPLICATIONS
Battery Powered Precision Instrumentation
Driving A - to - D Converters
Rail - to - Rail Buffer Amplifiers
Low Voltage Signal Processing
Active Filters
1
8548-33 Rev. - 3/12
10
ABSOLUTE MAXIMUM RATINGS
Total Supply Voltage (V+ to V-)
Input Current
Output Short - Circuit Duration
36V TST
±10mA TLD
-65°C to +150°C
Storage Temperature Range
Lead Temperature Range
(10 Seconds)
Junction Temperature
Case Operating Temperature Range
MSK 198K/H RHL
Indefinite
300°C
150°C
TJ
TC
-55°C to+125°C
-40°C to +85°C
MSK 198RHL
ELECTRICAL SPECIFICATIONS
2
8548-33 Rev. - 3/12
ELECTRICAL SPECIFICATIONS CONT'D
NOTES:
1
2
3
4
5
Unless otherwise specified; VS=±15V, VCM=VOUT=0V
Matching parameters are the difference between amplifiers A and B.
Input Offset Voltage Match and Input Bias Current Match are not specified for post radiation.
Output Voltage swings are measured between the output and power supply rails.
Guaranteed by design but not tested. Typical parameters are representative of actual device
performance but are for reference only.
6
7
8
9
Industrial grade devices shall be tested to subgroup 1 and 4 unless otherwise specified.
Military grade devices shall be 100% tested to subgroups 1,2,3 and 4.
Subgroups 5 and 6 testing available upon request.
Subgroup 1, 4
Subgroup 2, 5
Subgroup 3, 6
TA=TC=+25°C
TA=TC=+125°C
TA=TC=-55°C
10
11
Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle.
Pre and Post irradiation limits at 25°C, to TBD TID, are identical unless otherwise specified.
3
8548-33 Rev. - 3/12
APPLICATION NOTES
4th ORDER BUTTERWORTH FILTER
SINGLE TO DIFFERENTIAL ADC DRIVER
The wide bandwidth of the MSK 198RHL is ideal for designing
multi-order filter circuits. The circuit in Figure 3 shows a design that
cascades two 2nd order filters as a 100KHz 4th order low pass filter.
The design operates from a single supply. The filter offers a good
compromise for low parts count and performance with minimal over-
shoot and ringing characteristics that a Butterworth filter offers.
The circuit shown in Figure 1 utilizes the MSK 198RHL to buffer
and convert a single analog signal into an ADC with differential in-
puts. Some ADC's require an op amp to provide the appropriate gain
and offset to match the signal to the input range of the ADC. An ADC
may generate transient currents at their input due to the internal con-
version circuit, and these currents need to be isolated from the signal
source. The circuit in Figure 1 will provide a low impedance drive and
absorb these currents. The first op amp offsets the input signal 1.25V
while operating in unity gain. The output of the first op amp goes into
the IN+ of the ADC and the inverting input of the second op amp. The
second op amp inverts the signal around the 1.25VDC level applied to
its non-inverting input and the output is connected to the IN- of the
ADC. Optional filtering can be added to reduce high frequency noise
from the ADC inputs if required.
FIGURE 3
TOTAL DOSE RADIATION TEST
PERFORMANCE
Radiation performance curves for TID testing will be generated for all
radiation testing performed by MS Kennedy. These curves show per-
formance trends throughout the TID test process and will be located
in the MSK 198RHL radiation test report. The complete radiation test
report will be available in the RAD HARD PRODUCTS section on the
MSK website.
ADDITIONAL APPLICATION INFORMATION
For additional applications information, please reference Linear Tech-
nology Corporation's® LT1498/1499 and RH1498 data sheets.
FIGURE 1
INSTRUMENTATION AMPLIFIER
DIE GLASSIVATION
A simple low cost, low power consumption instrumentation ampli-
fier can be designed with the MSK 198RHL. Figure 2 shows a design
that offers sensitivity trim for offset voltage, CMRR and gain. The
circuit is configured for a differential input gain of 100.
For enhanced radiation tolerance the die has a glassivation thickness
of 4KA and is not in accordance with MIL-PRF-38535.
FIGURE 2
8548-33 Rev. - 3/12
4
TYPICAL PERFORMANCE CURVES
8548-33 Rev. - 3/12
5
ESD TRIANGLE INDICATES PIN 1
WEIGHT=TBD
ORDERING INFORMATION
MSK198 K RH L
PACKAGE STYLE
L=LCCC PACKAGE
RADIATION HARDENED
SCREENING
BLANK= INDUSTRIAL
H=MIL-PRF-38534 CLASS H; K=MIL-PRF-38534 CLASS K
GENERAL PART NUMBER
The above example is a Class K Dual Operational Amplifier in an LCCC package.
M.S. Kennedy Corp.
4707 Dey Road, Liverpool, New York 13088
Phone (315) 701-6751
FAX (315) 701-6752
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
Contact MSK for MIL-PRF-38534 qualification and radiation status.
6
8548-33 Rev. - 3/12
©2020 ICPDF网 联系我们和版权申明