XP1065-QJ-0G00 [MIMIX]
Amplifier,;型号: | XP1065-QJ-0G00 |
厂家: | MIMIX BROADBAND |
描述: | Amplifier, |
文件: | 总5页 (文件大小:294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.3-2.7 GHz HFET
3W Linear Power Amplifier
May 2008 - Rev 15-May-08
P1065-QJ
Features
P1dB, 3W
Power Gain, 17.0 dB
Positive Voltage Supply, +5V to +8V
Output and Input Pre-Matched Internally
Thermally Efficient for Higher MTTF
RoHS Compliant 6X6mm QFN
Ideal for WiMAX Applications (802.16)
General Description
The XP1065-QJ is a high linearity single stage power
amplifier capable of 17.0 dB of gain, 3 Watt of power at 1 dB
compression and is housed in a 6X6mm QFN package.
Absolute Maximum Ratings
Voltage Supply (Vdd)
Current (Idd)
Dissipated Power (Pdiss)
Input Power (Pin)
Storage Temperature (Tstg)
Channel Temperature (Tch)
Thermal Resistance (Rth)
9V
The XP1065-QJ provides less than 2.5% EVM at 27 dBm
output power with 802.16 OFDM signal and peak to
average power ratio of 9.17 dB.The input and output of the
device are pre-matched facilitating a simplified output
matching approach.The quiescent current is controlled
using a negative voltage.
1000 mA
8W
25 dBm
-60 to +150 ºC
200 ºC
The high dynamic range of this device makes it ideal as a
final or driver stage for WiMAX equipment in the 2.3-2.7
GHz bands.
20 ºC/W
Operating Backside Temperature (Tb) -40 ºC to (see note 1)
Operation outside any of these limits can cause permanent damage.
(1) Caclulate maximum operating temperature Tmax using the
following formula:Tmax=200-(Pdiss [W] x 20) [C].
Electrical Characteristics (AmbientTemperatureT=25 oC,Vcc=8V)1
Description
Parameter
Units
GHz
mA
Min.
Typ.
2.5
Max.
Operating Frequency
f
2.3
2.7
(2)
Quiescent Current
Idq
Gps
-
-
600
-
-
Power Gain @ Pout = 27dBm
dB
17.0
(3)
Output Power @ EVM = 2.5%
Pout
ACPR
P1dB
OIP3
Vgg
dBm
dBc
dBm
dBm
V
-
-
-
-
-
-
27
-45
34.5
46
-
-
-
-
-
-
(4)
Adjacent Channel Power Ratio @Pout = 27dBm
Power @ 1dB Compression Point
(5)
Output Third order intercept Point @ 24dBm/tone
Gate Voltage
Noise Figure
-0.8
5
NF
dB
(1) Data measrued in a Mimix matched connectorized fixture.
(2) Quiescent current depends on Vgg
(3) Using an 802.16d OFDM signal format with PAR = 9dB
(4) Using 3 GPP WCDMA signal, PAR = 9.17dB
(5) 100KHz spacing
Page 1 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
2.3-2.7 GHz HFET
3W Linear Power Amplifier
May 2008 - Rev 15-May-08
P1065-QJ
Typical Performance
EVM Vs Output Power Vs Frequency
ACPR Vs Output Power Vs Frequency
OFDM 802.16d, 64QAM, PAR =9 dB
WCDMA, 3GPP, PAR =9.17 dB
-35.00
-40.00
-45.00
-50.00
-55.00
-60.00
-65.00
4.5
4
8v 520mA 2.3GHz
3.5
2.3GHz, 8v 520mA
2.5GHz, 8v 520mA
2.8GHz, 8v 520mA
8v 520mA 2.5GHz
3
8v 520mA 2.8GHz
2.5
2
1.5
1
0.5
0
17 18 19 20 21 22 23 24 25 26 27 28 29
15
17
19
21
23
25
27
29
Output Power (dBm)
Ouput Power (dBm)
Gain Vs Output Power Vs Frequency
S parameters Vdd = 8V, Iq = 500 mA
17.5
20
15
10
5
17.0
16.5
16.0
S11
S21
S22
0
-5
2.3GHz, 8v 520mA
2.5GHz, 8v 520mA
2.7GHz, 8v 520mA
15.5
15.0
14.5
14.0
-10
-15
-20
1.5
1.7
1.9
2.1
2.3
2.5
2.7
2.9
3.1
3.3
Frequency (GHz)
23 24 25 26 27 28 29 30 31 32 33 34 35
Ouput Power (dBm)
P1dB Vs Frequency
Vd = 8V, Idd = 520 mA
36.0
35.5
35.0
34.5
34.0
33.5
33.0
2.25
2.3
2.35
2.4
2.45
2.5
2.55
2.6
2.65
2.7
2.75
Frequency (GHz)
Page 2 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
2.3-2.7 GHz HFET
3W Linear Power Amplifier
May 2008 - Rev 15-May-08
P1065-QJ
App Note [1] Biasing - The XP1065-QJ requires power supply sequencing. Negative voltage supply (Vgg) needs to be turned on first and
then positive voltage can be applied to the drain (Vdd).When turning off the device, the positive supply (Vdd) should be turned off first and
then negative voltage (Vgg) can be removed.
The gate voltage is adjusted in order to set the drain current to the desired level.The gate voltage required to achieve a certain current can
vary over temperature and from one device to another due to pinch-off voltage variation. Constant drain current can be achieved by
Implementing an active bias circuit which allows for temperature compensation and eliminates the effect of pinch-off voltage variation.
Typical cost of such applications is $0.15.
Physical Dimensions:
Page 3 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
2.3-2.7 GHz HFET
3W Linear Power Amplifier
May 2008 - Rev 15-May-08
P1065-QJ
Pin Assignment:
Functional Block Diagram:
RFout
RFout
Pin #
Description
4
RF IN
14
15
16
17
RF OUT 4
RF OUT 3
RF OUT 2
RF OUT 1
N/C
RFin
RFout
RFout
2, 3, 5, 6, 7, 8, 9, 10, 11, 12
13, 18, 19, 20, 21, 22, 23, 24
Page 4 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
2.3-2.7 GHz HFET
3W Linear Power Amplifier
May 2008 - Rev 15-May-08
P1065-QJ
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
- Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Description
XP1065-QJ-0G00
XP1065-QJ-0G0T
XP1065-QJ-EV1
Matte Tin plated RoHs compliant 6X6 QFN surface mount package in bulk
Matte Tin Plated RoHs compliant 6X6 QFN surface mount package in tape and reel
Evaluation Board with SMA connectors for WiMAX 2.5 GHz
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 5 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号:
XP1065-QJ-0G0T
Narrow Band Medium Power Amplifier, 2300MHz Min, 2700MHz Max, 6 X 6 MM, ROHS COMPLIANT, QFN-24
MIMIX
XP1066-SD-0G00
Narrow Band Medium Power Amplifier, 1800MHz Min, 2200MHz Max, ROHS COMPLIANT, SOIC-8
MIMIX
XP1066-SD-0G0T
Narrow Band Medium Power Amplifier, 1800MHz Min, 2200MHz Max, ROHS COMPLIANT, SOIC-8
MIMIX
XP1071-BD-000V
Wide Band High Power Amplifier, 14500MHz Min, 17000MHz Max, ROHS COMPLIANT, DIE
MIMIX
©2020 ICPDF网 联系我们和版权申明