XP1066-SD-0G0T [MIMIX]
Narrow Band Medium Power Amplifier, 1800MHz Min, 2200MHz Max, ROHS COMPLIANT, SOIC-8;
| 型号： | XP1066-SD-0G0T |
| 厂家： | 
MIMIX BROADBAND |
| 描述： | Narrow Band Medium Power Amplifier, 1800MHz Min, 2200MHz Max, ROHS COMPLIANT, SOIC-8 |
| 文件： | 总7页 (文件大小：239K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Features
30.5 dBm P1dB
Active Bias Circuit
11.5 dB Gain
5V Single Positive Supply
RoHS Compliant SOIC-8
General Description
The XP1066-SD is a high linearity power amplifier capable of 30.5
dBm of compressed 1-dB power and up to 46 dBm of OIP3.This
device has an integrated active bias circuit and can be externally
optimized to achieve 11.5 dB of gain. The XP1066-SD is housed in
an RoHS compliant SOIC-8 power package and has low thermal
resistance. All devices are 100% RF and DC tested.The XP1066-SD
is specifically designed to be used as a driver amplifier for wireless
infrastructure equipment.
Absolute Maximum Ratings
Typical Parameters
Supply Voltage
+6.0 V
Parameter
Typ Typ Typ Units
1950 2140 2200 MHz
RF Input Power
+20 dBm
-55 ºC to +125 ºC
150 ºC
Frequency Range
Gain
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Current
11.5 11.5 11.5
-7.0 -13.3 -15.0
dB
dB
Input Retrun Loss
Output Return Loss
Output IP3
-40 ºC to +85ºC
900 mA
-10.5 -6.0
-5.0
dB
42.0 42.0 42.0
30.7 30.1 29.5
dBm
dBm
Power Dissipation (PDC)
Thermal Resistance
5W
Output P1dB
9 ºC/W
Output Power @ ACPR
-45dBc, IS-95
Operation of this device above any of these parameters may cause damage.
22.5 23.5 23.0
dBm
dBm
Output Power @ ACPR
-45dBc, WCDMA
22.5 22.5 21.5
Typical performance in Mimix evaluation board
Electrical Characteristics (T = 25ºC)
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Condition
Units
MHz
dB
dB
dB
Min.
1800
10.0
Typ.
2140
11.5
-10
-8
Max.
2200
Externally Matched
Externally Matched
Externally Matched
dBm
dB
+46
6
Noise Figure
Output P1dB
dBm
mA
V
29.0
30.5
420
5.0
Operating Current Range
Supply Voltage
500
Notes:
1.T = 25ºC, 50 Ohm system.
2. OIP3 is measured with two tones at output power of 15 dBm/tone separated by 1 MHz.
Page 1 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Evaluation Board Schematic
Evaluation Board Component Layout
ComponentValues
Manufactur
Ref Designator
Value
3.9 pF
10 pF
Description
er
C1
0402 3.9pF COG High Q
0402 10pF COG High Q
0402 100pF COG
Murata
Murata
Murata
Murata
AVX
C2
R2
C3
100 pF
10 nF
C4
C3
C2
C7
C6
C4, C5, C6
0603 10nF X7R 50V
C5
C7
100 uF
20 pF
100 uF Tantalum Capacitor
0402 20 pF Hi Q capacitor
1.6 pF 0402 Hi Q capacitor
1.8 pF 0402 Hi Q capacitor
C9, C10
Murata
Murata
Murata
VENKEL
R1
C10
C8
1.6 pF
1.8 pF
R4
C9
R5
C1
C8
C11
C10
R1
100 Ohm 0402 100 ohm resistor
Zero ohm link
C11
R2, R2, R3, R4, R5
Page 2 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Typical Performance
Measured in Mimix evalutaion board
XP1066-SD: Sparameters: 5V, 450mA
XP1066-SD: Gain: 5V, 450mA
15
10
5
15
14
13
12
11
10
9
S11
S22
S21
S21
0
8
7
-5
6
5
-10
-15
-20
4
3
2
1
0
0
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
Frequency (GHz)
2
2.2 2.4 2.6 2.8
3
1.8
1.85
1.9
1.95
2
2.05
2.1
2.15
2.2
Frequency (GHz)
XP1066-SD: Return Loss: 5V, 450mA
XP1066-SD: ACPR: 5V, 450mA, IS-95 9CH FWD
-40
-45
-50
-55
-60
-65
-70
25
20
15
10
5
2.06 GHz
2.14 GHz
2.2 GHz
S11
S22
0
-5
-10
-15
-20
1.8
1.85
1.9
1.95
2
2.05
2.1
2.15
2.2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Frequency (GHz)
Pout (dBm)
XP1066-SD: ACPR: 5V, 450mA, 3GPP WCDMA
XP1066-SD: Current: 5V, IS-95 9CH FWD
-40
-45
-50
-55
-60
-65
-70
0.46
0.45
0.44
0.43
0.42
2.06 GHz
2.14 GHz
2.22 GHz
2.06 GHz
2.14 GHz
2.22 GHz
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Pout (dBm)
Pout (dBm)
Page 3 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Functional Block Diagram
Pin Out Detail
Pin
1
Function Description
Vref
N/C
RFin
N/C
Vbias
Vref
Reference voltage
3
RFin
RF Input
RFout
6, 7
8
RFout
Vbias
N/C
RF output
Bias circuit voltage
Not connected
RFout
2,4,5
N/C
Backside slug is collector GND
Land Pattern
It is recommended that all N/C pins be
grounded and sufficient number of
plated thru vias be added under the
ground plane to insure RF stability and
good thermal grounding.
Page 4 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Physical Dimensions
Page 5 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
MTTF
These numbers were calculated based on accelerated life test information received from the fabrication foundry and measured
thermal resistance.
XP1066-SD Vcc=5.0 V, Icc=450 mA
1.0E+09
1.0E+08
1.0E+07
1.0E+06
60
70
80
90
100
110
Backplate Temperature (deg C)
XP1066-SD Vcc=5.0 V, Icc=450 mA
140
120
100
80
60
40
20
0
40
50
60
70
80
90
100
110
Backplate Temperature (deg C)
Page 6 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1800-2200 MHz
1W, High Linearity InGaP HBT Amplifier
August 2008 - Rev 15-Aug-08
XP1066-SD
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage.Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained.Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow)“Pb Free”processes.
Ordering Information
Part Number for Ordering
XP1066-SD-0G00
Description
Matte Tin plated RoHS compliant SOIC-8 surface mount package in bulk quantity
XP1066-SD-0G0T
Matte Tin plated RoHS compliant SOIC-8 surface mount package in tape and reel
XP1066-SD-EV1
XP1066-SD Evaluation Board
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 7 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号：
XP1071-BD-000V
Wide Band High Power Amplifier, 14500MHz Min, 17000MHz Max, ROHS COMPLIANT, DIE
MIMIX
XP1076-SD-0G00
Wide Band Medium Power Amplifier, 700MHz Min, 2300MHz Max, ROHS COMPLIANT, SOIC-8
MIMIX
©2020 ICPDF网 联系我们和版权申明