ODLC-45-500 [MEANWELL]
CONSTANT CURRENT MODE OUTPUT;
| 型号： | ODLC-45-500 |
| 厂家： | 
MEAN WELL ENTERPRISES CO., LTD. |
| 描述： | CONSTANT CURRENT MODE OUTPUT 输出元件 |
| 文件： | 总6页 (文件大小：187K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
45W Constant Current Mode LED Driver
ODLC-45 series
F
M
M
IP67
SELV
Type HL
■ Features
■ Applications
ꢀLED panel lighting
ꢀLED flood lighting
ꢀIndoor LED lighting
ꢀConstant Current mode output
ꢀFlicker free design
ꢀPlastic housing with class II design
ꢀBuilt-in active PFC function
ꢀNo load power consumption<0.5W(Blank-Type)
ꢀIP67 rating for indoor or outdoor installations
ꢀFunction options: 2 in 1 dimming (dim-to-off);
Auxiliary DC output
ꢀ3 years warranty
■ Description
ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with
flicker free design.ODLC-45 operates from 90~295VAC and offers models with different rated
current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the
fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free
convection. The design of plastic housing and IP67 ingress protection level allows this series
to fit indoor wet applications. ODLC-45 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for lighting system.
■ Model Encoding
-
45
- 350
A
ODLC
Rated output current(350/500/700/1050/1400mA)
Function options
Rated wattage
Series name
Type
Blank
A
Function
2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming, Auxiliary DC output
Note
In Stock
In Stock
File Name:ODLC-45-SPEC 2016-10-26
45W Constant Current Mode LED Driver
ODLC-45 series
SPECIFICATION
MODEL
ODLC-45 -500
ODLC-45 -1050
ODLC-45 -350
ODLC-45 -700
ODLC-45 -1400
RATED CURRENT
500mA
45W
1050mA
45.15W
350mA
700mA
44.8W
1400mA
44.8W
RATED POWER
33.25W
57 ~ 95V
54 ~ 90V
115V
26 ~ 43V
63V
CONSTANT CURRENT REGION Note.2
OPEN CIRCUIT VOLTAGE(max.)
CURRENT RIPPLE
38 ~ 64V
84V
19 ~ 32V
50V
118V
OUTPUT
5% max. @rated current
CURRENT TOLERANCE
SETUP TIME Note.4
7.0%
500ms / 230VAC 1200ms/115VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
AUXILIARY DC OUTPUT Note.5
90 ~ 295VAC
127 ~ 417VDC
VOLTAGE RANGE Note.3
FREQUENCY RANGE
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
POWER FACTOR (Typ.)
THD< 20%(@load≧60%/230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION” section)
TOTAL HARMONIC DISTORTION
INPUT
85%
0.6A/115VAC 0.4A/230VAC
84%
EFFICIENCY (Typ.)
AC CURRENT
86%
85%
0.3A/277VAC
83%
INRUSH CURRENT (Typ.)
COLD START 30A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
<0.5W for Blank-Type
NO LOAD POWER CONSUMPTION
PROTECTION
ENVIRONMENT
Hiccup mode, recovers automatically after fault condition is removed
Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Tcase=+85℃
SHORT CIRCUIT
WORKING TEMP.
MAX. CASE TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
20 ~ 90% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
0.03%/℃ (0 ~ 40℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750(type”HL”),CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;
IP67 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
SAFETY &
EMC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
408.8Khrs min. MIL-HDBK-217F (25℃)
111*77*28.5mm(L*W*H)
DIMENSION
OTHERS
NOTE
0.42Kg; 24pcs/ 11Kg/ 0.72CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De-rating may be needed under low input voltages. Pleaserefer to STATIC CHARACTERISTIC sections for details .
4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.
5. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming inputerminals(DIM+,DIM-)
are short circuit or when it is no load or short circuit at output(Vo+,Vo-).
6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be
affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
File Name:ODLC-45-SPEC 2016-10-26
45W Constant Current Mode LED Driver
ODLC-45 series
Block Diagram
fosc : 70KHz
AUX+(for A-Type)
AUX-(for A-Type)
RECTIFIERS
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
Vo+
Vo-
I/P
DIM+
DIM-
CURRENT
LIMIT
O.L.P.
DETECTION
CIRCUIT
PWM&PFC
CONTROL
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Should there be any compatibility issues, please contact MEAN WELL.
Constant
Current area
60
(min.)
Hiccup
Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
File Name:ODLC-45-SPEC 2016-10-26
45W Constant Current Mode LED Driver
ODLC-45 series
DIMMING OPERATION
※ 2 in 1 dimming function
AUX-(Green)
AUX+(Yellow)
V0-(Black)
V0+(Red)
DIM-(Gray)
DIM+(Purple)
ACN(Blue)
ACL(Brown)
ꢀOutput constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal.
ꢀDirect connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
◎ Applying additive 0 ~ 10VDC
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
+
+
+V
-
-
-V
DIM+
+
Additive Voltage
-
DIM-
“DO NOT connect "DIM- to Vo-"
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
◎ Applying additive 10V PWM signal (frequency range 300Hz ~ 3KHz):
+
+
+V
-
-
-V
DIM+
Additive PWM signal
DIM-
“DO NOT connect "DIM- to Vo-"
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
File Name:ODLC-45-SPEC 2016-10-26
45W Constant Current Mode LED Driver
ODLC-45 series
OUTPUT LOAD vs TEMPERATURE
90~295VAC for 350mA Model,200~295VAC for others
90~295VAC for 350mA Model,200~295VAC for others
100
80
100
80
90~200VAC for models other
than 350mA Model
90~200VAC for models other
than 350mA Model
60
40
60
40
20
20
(HORIZONTAL)
(HORIZONTAL)
-20
-10
0
10
20
30
40
50
-20
-10
0
15
30
45
60
85
CASE TEMPERATURE (℃)
AMBIENT TEMPERATURE,Ta (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
100
1
0.95
0.9
for 350mA Model
90
80
for others
70
60
50
40
277V
230V
115V
0.85
0.8
0.75
0.7
90
295
135
180 200
50%
60%
70%
80%
90%
100%
INPUT VOLTAGE (V)
(45W)
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
EFFICIENCY vs LOAD
ODLC-45 series possess superior working efficiency that up to 86% can
be reached in field applications.
※ 350mA Model,Tcase at 75℃
※ 350mA Model,Tcase at 75℃
16
14
12
10
8
90
88
86
84
277V
230V
115V
277V
230V
115V
82
80
78
76
6
4
2
0
50%
60%
70%
80%
90%
100%
50%
60%
70%
80%
90%
100%
LOAD
LOAD
File Name:ODLC-45-SPEC 2016-10-26
45W Constant Current Mode LED Driver
ODLC-45 series
MECHANICAL SPECIFICATION
Case No.ODLC-45A
Unit:mm
111
※Blank-Type:
3.5
200 10
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150 10
ACN(Blue)
ACL(Brown)
200 10
2*ψ4.5
3.5
tc
ꢀ
: Max. Case Temperature
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
Vo-(Black)
ACN(Blue)
SVT 18AWG
SVT 18AWG
UL1007 18AWG
Vo+(Red)
UL1007 18AWG
ACL(Brown)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
※A-Type:
111
3.5
200 10
150 10
AUX-(Green)
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150 10
ACN(Blue)
ACL(Brown)
200 10
2*ψ4.5
tc
3.5
ꢀ
: Max. Case Temperature
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
AUX-(Green)
UL1007 22AWG
UL1007 22AWG
UL1007 18AWG
UL1007 18AWG
ACN(Blue)
SVT 18AWG
SVT 18AWG
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
ACL(Brown)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:ODLC-45-SPEC 2016-10-26
相关型号：
©2020 ICPDF网 联系我们和版权申明