ODLC-65-A-1050 [MEANWELL]
CONSTANT CURRENT MODE OUTPUT;
| 型号： | ODLC-65-A-1050 |
| 厂家： | 
MEAN WELL ENTERPRISES CO., LTD. |
| 描述： | CONSTANT CURRENT MODE OUTPUT 输出元件 |
| 文件： | 总6页 (文件大小：179K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
65W Constant Current Mode LED Driver
ODLC-65 series
F
M
M
IP67
SELV
Type HL
■ Features
■ Applications
ꢀLED panel lighting
ꢀLED flood lighting
ꢀIndoor LED lighting
ꢀConstant Current mode output
ꢀFlicker free design
ꢀPlastic housing with class II design
ꢀBuilt-in active PFC function
ꢀNo load power consumption<0.5W(Blank-Type)
ꢀIP67 rating for indoor or outdoor installations
ꢀFunction options: 2 in 1 dimming (dim-to-off);
Auxiliary DC output
ꢀ3 years warranty
■ Description
ODLC-65 series is a 65W LED AC/DC driver featuring the constant current mode output with
flicker free design. ODLC-65 operates from 180~295VAC and offers models with different rated
current ranging between 700mA and 1750mA. Thanks to the efficiency up to 88%, with the
fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free
convection. The design of plastic housing and IP67 ingress protection level allows this series
to fit indoor wet applications. ODLC-65 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for lighting system.
■ Model Encoding
-
65
-
1050
ODLC
A
Rated output current(700/1050/1400/1750mA)
Function options
Output wattage
Series name
Type
Blank
Function
2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming and Auxiliary DC output
Note
In Stock
In Stock
A
File Name:ODLC-65-SPEC 2016-10-26
65W Constant Current Mode LED Driver
ODLC-65 series
SPECIFICATION
MODEL
ODLC-65 -700
ODLC-65 -1050
ODLC-65 -1400
ODLC-65 -1750
1050mA
65.1W
46 ~ 62V
82V
1400mA
64.4W
34 ~ 46V
60V
1750mA
63W
700mA
65.1W
RATED CURRENT
RATED POWER
27 ~ 36V
53V
CONSTANT CURRENT REGION Note.2 69 ~ 93V
118V
OPEN CIRCUIT VOLTAGE(max.)
CURRENT RIPPLE
OUTPUT
5% max. @rated current
CURRENT TOLERANCE
SETUP TIME Note.4
7.0%
500ms / 230VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
AUXILIARY DC OUTPUT Note.5
180 ~ 295VAC
254 ~ 417VDC
VOLTAGE RANGE Note.3
FREQUENCY RANGE
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF>0.95/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
POWER FACTOR (Typ.)
THD< 20%(@load≧75%/230VAC,277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION” section)
TOTAL HARMONIC DISTORTION
INPUT
EFFICIENCY (Typ.)
AC CURRENT
86%
0.3A/277VAC
85%
85%
88%
0.4A/230VAC
INRUSH CURRENT (Typ.)
COLD START 30A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
NO LOAD POWER CONSUMPTION
SHORT CIRCUIT
<0.75mA / 277VAC
<0.5W for Blank-Type, <1.2W for A-Type
PROTECTION
ENVIRONMENT
Hiccup mode, re-power on to recovery
Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
WORKING TEMP.
MAX. CASE TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
Tcase=+85℃
20 ~ 90% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
0.03%/℃ (0 ~ 45℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750;CSA C22.2 NO.250.13-12; ENEC EN61347-1 & EN61347-2-13 independent, EN62384,
GB19510.1,GB19510.14; IP67 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
SAFETY &
EMC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
Compliance to EN55015, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3,GB17743,GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
380.7Khrs min. MIL-HDBK-217F (25℃)
121*77*28.5mm(L*W*H)
DIMENSION
OTHERS
NOTE
0.43Kg; 24pcs/ 11.3Kg/ 0.74CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.
4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time or set up failure
5. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-)
are short circuit or when it is no load or short circuit at output(Vo+,Vo-).
6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be
affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
File Name:ODLC-65-SPEC 2016-10-26
65W Constant Current Mode LED Driver
ODLC-65 series
fosc : 70KHz
Block Diagram
AUX+(for A-Type)
AUX-(for A-Type)
RECTIFIERS
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
Vo+
Vo-
I/P
DIM+
DIM-
CURRENT
LIMIT
O.L.P.
DETECTION
CIRCUIT
PWM&PFC
CONTROL
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Should there be any compatibility issues, please contact MEAN WELL.
Constant
Current area
75
(min.)
Hiccup
Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
File Name:ODLC-65-SPEC 2016-10-26
65W Constant Current Mode LED Driver
ODLC-65 series
DIMMING OPERATION
※ 2 in 1 dimming function
AUX-(Green)
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
ACN(Blue)
ACL(Brown)
ꢀOutput constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal.
ꢀDirect connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
◎ Applying additive 0 ~ 10VDC
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
+
+
Vo+
-
-
Vo-
DIM+
+
Additive Voltage
-
DIM-
“DO NOT connect "DIM- to Vo-"
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
◎ Applying additive 10V PWM signal (frequency range 300Hz ~ 3KHz):
+
+
Vo+
-
-
Vo-
DIM+
Additive PWM signal
DIM-
“DO NOT connect "DIM- to Vo-"
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
File Name:ODLC-65-SPEC 2016-10-26
65W Constant Current Mode LED Driver
ODLC-65 series
OUTPUT LOAD vs TEMPERATURE
100
80
100
80
60
40
60
40
20
20
-20
-10
0
15
30
45
75
85
-20
-10
0
5
10
20
30
45
(HORIZONTAL)
(HORIZONTAL)
AMBIENT TEMPERATURE,Ta (℃)
Tcase (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
100
90
80
70
60
50
40
1
0.95
0.9
0.85
0.8
277V
230V
0.75
0.7
180
200
230
260
295
50%
60%
70%
80%
90%
100%
(65W)
INPUT VOLTAGE (V)
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
※ 700mA Model, Tcase at 75℃
EFFICIENCY vs LOAD
ODLC-65 series possess superior working efficiency that up to 88% can
be reached in field applications.
※ 700mA Model, Tcase at 75℃
94
90
86
18
16
14
12
10
8
277VAC
230VAC
277V
82
230V
6
78
4
74
2
0
70
50%
60%
70%
80%
90%
100%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
LOAD
File Name:ODLC-65-SPEC 2016-10-26
65W Constant Current Mode LED Driver
ODLC-65 series
MECHANICAL SPECIFICATION
Case No.ODL-65A
Unit:mm
121
※Blank-Type:
3.5
200 10
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150 10
ACN(Blue)
ACL(Brown)
200 10
2*ψ4.5
3.5
tc
※
: Max. Case Temperature.
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
Vo-(Black)
ACN(Blue)
SVT 18AWG
SVT 18AWG
UL1007 18AWG
Vo+(Red)
UL1007 18AWG
ACL(Brown)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
121
※A-Type:
3.5
200 10
150 10
AUX-(Green)
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150 10
ACN(Blue)
ACL(Brown)
200 10
2*ψ4.5
3.5
※
tc : Max. Case Temperature.
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
ACN(Blue)
SVT 18AWG
SVT 18AWG
AUX-(Green)
UL1007 22AWG
UL1007 22AWG
UL1007 18AWG
UL1007 18AWG
ACL(Brown)
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:ODLC-65-SPEC 2016-10-26
相关型号：
©2020 ICPDF网 联系我们和版权申明