ODLV-45-60 [MEANWELL]
45W PWM Output LED Driver;
| 型号： | ODLV-45-60 |
| 厂家： | 
MEAN WELL ENTERPRISES CO., LTD. |
| 描述： | 45W PWM Output LED Driver |
| 文件： | 总6页 (文件大小：646K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
45W PWM Output LED Driver
ODLV-45 series
F
M
M
SELV
IP67
TypeꢀHL
■ Features
‧ConstantꢀVoltageꢀPWMꢀstyleꢀoutput
ꢀꢀꢀꢀwithꢀfrequencyꢀ1KHz
■ Applicationsꢀ
‧LEDꢀstripꢀlighting
‧IndoorꢀLEDꢀlighting
‧LEDꢀdecorativeꢀlighting
‧LEDꢀarchitectureꢀlighting
‧PlasticꢀhousingꢀwithꢀclassꢀIIꢀdesign
‧Built-inꢀactiveꢀPFCꢀfunction
‧Noꢀloadꢀpowerꢀconsumption<0.5W(Blank-Type)
‧IP67ꢀratingꢀforꢀindoorꢀorꢀoutdoorꢀinstallations
‧Functionꢀoptions:ꢀ2ꢀinꢀ1ꢀdimmingꢀ(dim-to-off);
ꢀꢀꢀꢀAuxiliaryꢀDCꢀoutput
‧3ꢀyearsꢀwarranty
■ Descriptionꢀ
ODLV-45ꢀseriesꢀisꢀaꢀ45WꢀAC/DCꢀLEDꢀdriverꢀfeaturingꢀtheꢀconstantꢀvoltageꢀmodeꢀPWMꢀstyleꢀoutput
design.ꢀODLV-45ꢀoperatesꢀfromꢀ90~295VACꢀandꢀoffersꢀmodelsꢀwithꢀdifferentꢀratedꢀvoltageꢀranging
betweenꢀ12Vꢀandꢀ60V.ꢀThanksꢀtoꢀtheꢀhighꢀefficiencyꢀupꢀtoꢀ90%,ꢀwithꢀtheꢀfanlessꢀdesign,ꢀtheꢀentire
seriesꢀisꢀableꢀtoꢀoperateꢀforꢀ-20℃~+85℃ꢀcaseꢀtemperatureꢀunderꢀfreeꢀairꢀconvection.ꢀTheꢀdesignꢀofꢀ
plasticꢀhousingꢀandꢀIP67ꢀingressꢀprotectionꢀlevelꢀallowsꢀthisꢀseriesꢀtoꢀfitꢀindoorꢀwetꢀapplications.ꢀ
ODLV-45ꢀisꢀequippedꢀwithꢀvariousꢀfunctionꢀoptions,ꢀsuchꢀasꢀdimmingꢀmethodologies,ꢀsoꢀasꢀtoꢀprovideꢀ
theꢀdesignꢀflexibilityꢀforꢀLEDꢀlightingꢀsystem.
■ ModelꢀEncoding
45
- 12
A
ODLV -
Ratedꢀoutputꢀvoltage(12/24/36/48/60V)
Functionꢀoptions
Ratedꢀwattage
Seriesꢀname
Type
Blank
A
Function
Note
InꢀStock
InꢀStock
2ꢀinꢀ1ꢀdimmingꢀ(0~10VDCꢀandꢀ10VꢀPWM)
2ꢀinꢀ1ꢀdimmingꢀandꢀAuxiliaryꢀDCꢀoutput
File Name:ODLV-45-SPEC 2017-07-21
45W PWM Output LED Driver
ODLV-45 series
SPECIFICATION
MODEL
ODLV-45 -12
ODLV-45 -24
ODLV-45 -36
36V
ODLV-45 -48
ODLV-45 -60
DC VOLTAGE
12V
24V
48V
60V
1.25A
3.0A
1.88A
45.12W
0.94A
45.12W
0.75A
45W
RATED CURRENT
RATED POWER
45W
36W
0~100%
±10%
DIMMING RANGE
OUTPUT
VOLTAGE TOLERANCE
PWM FREQUENCY (Typ.)
SETUP TIME Note.3
AUXILIARY DC OUTPUT Note.4
1KHz(±20%)
500ms / 230VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
1200ms/115VAC
90 ~ 295VAC 127 ~ 417VDC
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
VOLTAGE RANGE Note.2
FREQUENCY RANGE
POWER FACTOR (Typ.)
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧60%/115VAC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION” section)
INPUT
TOTAL HARMONIC DISTORTION
88%
90%
EFFICIENCY (Typ.)
84%
88%
86%
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
0.6A / 115VAC
0.4A / 230VAC
0.3A / 277VAC
COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
LEAKAGE CURRENT
<0.5W for Blank-Type, <1.2W for A-Type
NO LOAD POWER CONSUMPTION
Shut down O/P voltage, re-power on to recovery
SHORT CIRCUIT
105 ~ 115%
PROTECTION
ENVIRONMENT
OVER CURRENT
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP.
Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
Tcase=+85℃
20 ~ 90% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750(type"HL"),CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;
IP67 approved
I/P-O/P:3.75KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
SAFETY &
EMC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
388.02K hrs min. MIL-HDBK-217F (25℃)
111*77*28.5mm (L*W*H)
0.42Kg;24pcs/11Kg/ 0.72CUFT
OTHERS DIMENSION
PACKING
1.ꢀAllꢀparametersꢀNOTꢀspeciallyꢀmentionedꢀareꢀmeasuredꢀatꢀ230VACꢀinput,ꢀratedꢀcurrentꢀandꢀ25℃ꢀofꢀambientꢀtemperature.
2.ꢀDe-ratingꢀmayꢀbeꢀneededꢀunderꢀlowꢀinputꢀvoltages.ꢀPleaseꢀreferꢀtoꢀ“STATICꢀCHARACTERISTIC”ꢀsectionsꢀforꢀdetails.
3.ꢀLengthꢀofꢀsetꢀupꢀtimeꢀisꢀmeasuredꢀatꢀcoldꢀfirstꢀstart.ꢀTurningꢀON/OFFꢀtheꢀdriverꢀmayꢀleadꢀtoꢀincreaseꢀofꢀtheꢀsetꢀupꢀtime.
4.ꢀThereꢀisꢀnoꢀdesignꢀofꢀshortꢀcircuitꢀprotectionꢀforꢀtheꢀAuxiliaryꢀDCꢀoutput;ꢀthisꢀfunctionꢀcanꢀnotꢀbeꢀusedꢀwhenꢀdimmingꢀinputꢀterminals(DIM+,DIM-)ꢀ
ꢀꢀꢀꢀareꢀshortꢀcircuitꢀorꢀwhenꢀitꢀisꢀnoꢀloadꢀorꢀshortꢀcircuitꢀatꢀoutput(Vo+,Vo-).
NOTE
5.ꢀTheꢀdriverꢀisꢀconsideredꢀasꢀaꢀcomponentꢀthatꢀwillꢀbeꢀoperatedꢀinꢀcombinationꢀwithꢀfinalꢀequipment.ꢀSinceꢀEMCꢀperformanceꢀwillꢀbeꢀ
ꢀꢀꢀꢀaffectedꢀbyꢀtheꢀcompleteꢀinstallation,ꢀtheꢀfinalꢀequipmentꢀmanufacturersꢀmustꢀre-qualifyꢀEMCꢀDirectiveꢀonꢀtheꢀcompleteꢀinstallationꢀagain.
File Name:ODLV-45-SPEC 2017-07-21
45W PWM Output LED Driver
ODLV-45 series
DIMMING OPERATION
AUX-(Green)
AUX+(Yellow)
V -(Black)
V00+(Red)
DIM-(Gray)
DIM+(Purple)
ACN(Blue)
ACL(Brown)
※ Dimming principle for PWM style output
‧Dimming is achieved by varying the duty cycle of the output current.
ON
Output DC current
TON
T
Duty cycle(%) =
×100%
Output PWM frequency : 1KHz(±20%)
OFF
Io=0A
TON
T
※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
+
+
Vo+
-
-
Vo-
DIM+
+
Additive Voltage
-
DIM-
“DO NOT connect "DIM- to Vo-”
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):
+
+
Vo+
-
-
Vo-
DIM+
Additive PWM signal
DIM-
“DO NOT connect "DIM- to Vo-”
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%.
2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.
File Name:ODLV-45-SPEC 2017-07-21
45W PWM Output LED Driver
ODLV-45 series
OUTPUT LOAD vs TEMPERATURE
100
100
80
70
60
80
70
60
40
20
40
20
(HORIZONTAL)
(HORIZONTAL)
-20
-10
0
10
20
30
40
50
-20
-10
0
15
30
45
60
85
Tcase (℃)
AMBIENT TEMPERATURE,Ta (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
100
90
for 12V model
1.00
80
0.95
0.90
0.85
0.80
0.75
for others
70
277(45W)
230(45W)
115(36W)
60
50
40
90
100
295
135
180 200 230
50%
60%
70%
80%
90%
100%
INPUT VOLTAGE (V)
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
※ 60V Model,Tcase at 75℃
EFFICIENCY vs LOAD
ODLV-45 series possess superior working efficiency that up to 90% can
be reached in field applications.
ꢀ 60V Model,Tcase at 75ꢀ
91%
90%
89%
19.00%
17.00%
15.00%
13.00%
11.00%
9.00%
277(45W)
230(45W)
115(36W)
277(45W)
230(45W)
115(36W)
88%
87%
86%
85%
7.00%
5.00%
50%
60%
70%
80%
90%
100%
50%
60%
70%
80%
90%
100%
LOAD
LOAD
File Name:ODLV-45-SPEC 2017-07-21
45W PWM Output LED Driver
ODLV-45 series
BLOCK DIAGRAM
fosc : 70~150KHz
AUX+(for A-Type)
AUX-(for A-Type)
RECTIFIERS
RECTIFIERS
EMI FILTER
&
POWER
SWITCHING
Vo+
Vo-
I/P
&
RECTIFIERS
FILTER
CURRENT
LIMIT
DIM+
DIM-
O.L.P.
DETECTION
CIRCUIT
PWM&PFC
CONTROL
DRIVING METHODS OF LED MODULE
※ This series work in Constant Voltage mode to drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Should there be any compatibility issues, please contact MEAN WELL.
(B)
(A)
Constant
Constant
Current area
Voltage area
50
(min.)
(C)
Hiccup
Protection
100
50
Io(%)
Typical output current normalized by rated current (%)
File Name:ODLV-45-SPEC 2017-07-21
45W PWM Output LED Driver
ODLV-45 series
MECHANICAL SPECIFICATION
Case No.ODL-45A
Unit:mm
111
※Blank-Type:
3.5
200±10
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150±10
ACN(Blue)
ACL(Brown)
200±10
2*ψ4.5
3.5
tc
‧
: Max. Case Temperature
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
Vo-(Black)
ACN(Blue)
SVT 18AWG
SVT 18AWG
UL1007 18AWG
UL1007 18AWG
Vo+(Red)
ACL(Brown)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
111
※A-Type:
3.5
200±10
150±10
AUX-(Green)
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)
30
tc
150±10
ACN(Blue)
ACL(Brown)
200±10
2*ψ4.5
tc
3.5
‧
: Max. Case Temperature
AC wire No. Assignment(AC IN)
DC wire No. Assignment(DC OUT)
AUX-(Green)
UL1007 22AWG
UL1007 22AWG
UL1007 18AWG
UL1007 18AWG
ACN(Blue)
SVT 18AWG
SVT 18AWG
AUX+(Yellow)
Vo-(Black)
Vo+(Red)
ACL(Brown)
DIM-(Gray) UL1007 22AWG
DIM+(Purple)
UL1007 22AWG
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:ODLV-45-SPEC 2017-07-21
相关型号：
©2020 ICPDF网 联系我们和版权申明