WP7113YT_15 [KINGBRIGHT]

T-1 3/4 (5mm) SOLID STATE LAMP;
WP7113YT_15
型号: WP7113YT_15
厂家: KINGBRIGHT CORPORATION    KINGBRIGHT CORPORATION
描述:

T-1 3/4 (5mm) SOLID STATE LAMP

文件: 总6页 (文件大小:320K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
T-1 3/4 (5mm) SOLID STATE LAMP  
Part Number: WP7113SYCK/J3  
Super Bright Yellow  
Features  
Description  
z Low power consumption.  
z Popular T-1 3/4 diameter package.  
z General purpose leads.  
z Reliable and rugged.  
The Super Bright Yellow device is based on light emitting  
diode chip made from AlGaInP.  
z Long life - solid state reliability.  
z Available on tape and reel.  
z RoHS compliant.  
Package Dimensions  
Notes:  
1. All dimensions are in millimeters (inches).  
2. Tolerance is ±0.25(0.01") unless otherwise noted.  
3. Lead spacing is measured where the leads emerge from the package.  
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 1 OF 6  
CHECKED: Allen Liu  
ERP: 1101032228  
Selection Guide  
Iv (mcd) [2]  
@ 20mA  
Viewing  
Angle [1]  
Part No.  
Dice  
Lens Type  
Min.  
Typ.  
2θ1/2  
WP7113SYCK/J3  
Notes:  
Super Bright Yellow (AlGaInP)  
Water Clear  
4000  
6000  
20°  
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.  
2. Luminous intensity/ luminous Flux: +/-15%.  
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.  
Electrical / Optical Characteristics at TA=25°C  
Symbol  
λpeak  
λD [1]  
Δλ1/2  
C
Parameter  
Peak Wavelength  
Dominant Wavelength  
Spectral Line Half-width  
Capacitance  
Device  
Typ.  
590  
590  
20  
Max.  
Units  
Test Conditions  
IF=20mA  
Super Bright Yellow  
Super Bright Yellow  
Super Bright Yellow  
Super Bright Yellow  
Super Bright Yellow  
Super Bright Yellow  
nm  
nm  
nm  
pF  
V
IF=20mA  
IF=20mA  
45  
VF=0V;f=1MHz  
IF=20mA  
VF [2]  
IR  
Forward Voltage  
2
2.5  
10  
Reverse Current  
uA  
VR = 5V  
Notes:  
1. Wavelength: +/-1nm.  
2. Forward Voltage: +/-0.1V.  
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.  
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or  
premature failure.  
Absolute Maximum Ratings at TA=25°C  
Parameter  
Super Bright Yellow  
Units  
mW  
mA  
mA  
V
Power dissipation  
75  
30  
140  
5
DC Forward Current  
Peak Forward Current [1]  
Reverse Voltage  
Operating/Storage Temperature  
Lead Solder Temperature [2]  
Lead Solder Temperature [3]  
-40°C To +85°C  
260°C For 3 Seconds  
260°C For 5 Seconds  
Notes:  
1. 1/10 Duty Cycle, 0.1ms Pulse Width.  
2. 2mm below package base.  
3. 5mm below package base.  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
CHECKED: Allen Liu  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 2 OF 6  
ERP: 1101032228  
Super Bright Yellow  
WP7113SYCK/J3  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 3 OF 6  
CHECKED: Allen Liu  
ERP: 1101032228  
PACKING & LABEL SPECIFICATIONS  
WP7113SYCK/J3  
Terms and conditions for the usage of this document  
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.  
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without  
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.  
3. When using the products referenced in this document, please make sure the product is being operated within the environmental  
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible  
for any subsequent issues.  
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has  
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with  
Kingbright representative for further assistance.  
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.  
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 4 OF 6  
CHECKED: Allen Liu  
ERP: 1101032228  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 5 OF 6  
CHECKED: Allen Liu  
ERP: 1101032228  
SPEC NO: DSAN0372  
APPROVED: WYNEC  
REV NO: V.2B  
DATE: JAN/21/2015  
DRAWN: P.Cheng  
PAGE: 6 OF 6  
CHECKED: Allen Liu  
ERP: 1101032228  

相关型号:

WP7113ZGC

T-1 3/4 (5mm) SOLID STATE LAMP
KINGBRIGHT

WP7113ZGC-AMT

暂无描述
KINGBRIGHT

WP7113ZGC/G

Single Color LED, Green, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT

WP7114PWC/J

Visible LED
KINGBRIGHT

WP7114RWC-A

T-1 3/4 (5mm) SOLID STATE LAMP
KINGBRIGHT

WP7114RWC-Z

T-1 3/4 (5mm) SOLID STATE LAMP
KINGBRIGHT

WP7114RWC/A

T-1 3/4 (5mm) SOLID STATE LAMP
KINGBRIGHT

WP7114RWC/J

Single Color LED, White, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT

WP7114RWC/Z

T-1 3/4 (5mm) SOLID STATE LAMP
KINGBRIGHT

WP7143SGC

T-1 3/4 (5mm) ROUND LED LAMP
KINGBRIGHT

WP7143SRC-D

T-1 3/4 (5mm) ROUND LED LAMP
KINGBRIGHT

WP7143SRC/D

T-1 3/4 (5mm) ROUND LED LAMP
KINGBRIGHT