WP7114PWC/J [KINGBRIGHT]
Visible LED;
| 型号： | WP7114PWC/J |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Visible LED |
| 文件： | 总4页 (文件大小：97K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
T-1 3/4 (5mm) SOLID STATE LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
WP7114PWC/J
WHITE
SENSITIVE
DEVICES
PRELIMINARY SPEC
Features
Description
ꢀLOW POWER CONSUMPTION.
ꢀPOPULAR T-1 3/4 DIAMETER PACKAGE.
ꢀGENERAL PURPOSE LEADS.
ꢀRELIABLE AND RUGGED.
The source color devices are made with InGaN on
SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
ꢀLONG LIFE - SOLID STATE RELIABILITY.
ꢀAVAILABLE ON TAPE AND REEL.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF4764
APPROVED: J. Lu
REV NO: V.1
DATE: JUN/16/2005
DRAWN: H.Q.YUAN
PAGE: 1 OF 4
CHECKED: Allen Liu
ERP:1101015920
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
20°
WP7114PWC/J
Note:
WHITE (InGaN)
WATER CLEAR
2800
5000
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
4.0
Units
Test Conditions
IF=20mA
VF
IR
X
Forward Voltage
Reverse Current
White
White
3.2
V
10
uA
VR = 5V
0.33
0.34
110
Chromaticity Coordinates
Capacitance
White
White
Y
C
pF
VF=0V;f=1MHz
Absolute Maximum Ratings at TA=25°C
Parameter
White
Units
mW
mA
mA
V
Power dissipation
120
30
Forward Current
Peak Forward Current [1]
Reverse Voltage
100
5
Operating / Storage Temperature
Lead Solder Temperature[2]
Lead Solder Temperature[3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF4764
APPROVED: J. Lu
REV NO: V.1
CHECKED: Allen Liu
DATE: JUN/16/2005
DRAWN: H.Q.YUAN
PAGE: 2 OF 4
ERP:1101015920
White
WP7114PWC/J
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or chromaticity),
the typical accuracy of the sorting process is as follows:
1. Chromaticity Coordinates X, Y: +/-0.02
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF4764
APPROVED: J. Lu
REV NO: V.1
DATE: JUN/16/2005
DRAWN: H.Q.YUAN
PAGE: 3 OF 4
CHECKED: Allen Liu
ERP:1101015920
PACKING & LABEL SPECIFICATIONS
WP7114PWC/J
SPEC NO: DSAF4764
APPROVED: J. Lu
REV NO: V.1
CHECKED: Allen Liu
DATE: JUN/16/2005
DRAWN: H.Q.YUAN
PAGE: 4 OF 4
ERP:1101015920
相关型号：
©2020 ICPDF网 联系我们和版权申明