WP7114RWC-A [KINGBRIGHT]
T-1 3/4 (5mm) SOLID STATE LAMP; T-1 3/4 (5毫米)固态灯型号: | WP7114RWC-A |
厂家: | KINGBRIGHT CORPORATION |
描述: | T-1 3/4 (5mm) SOLID STATE LAMP |
文件: | 总7页 (文件大小:300K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T-1 3/4 (5mm) SOLID STATE LAMP
PRELIMINARY SPEC
ATTENTION
Part Number: WP7114RWC/A
WHITE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Description
SENSITIVE
DEVICES
The source color devices are made with InGaN on SiC Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
Features
ꢀ LOW POWER CONSUMPTION.
All devices, equipment and machinery must be electrically
grounded.
ꢀ POPULAR T-1 3/4 DIAMETER PACKAGE.
ꢀ GENERAL PURPOSE LEADS.
ꢀ RELIABLE AND RUGGED.
ꢀ LONG LIFE - SOLID STATE RELIABILITY.
ꢀ AVAILABLE ON TAPE AND REEL.
ꢀ MOISTURE SENSITIVITY LEVEL : LEVEL 1.
ꢀ ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
ꢀ TYP. COLOR TEMPERATURE:6500K.
ꢀ COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO
CIE1931(WHITE).
Applications
ꢀ
ꢀ
ꢀ
ꢀ
Marker lights
Furniture lighting
Outdoor displays
Optical indicators
ꢀ Signal and symbol luminaire
ꢀ OPTICAL EFFICIENCY:6 lm/W(TYP.)
ꢀ COLOR REPRODUCTION INDEX:80.
ꢀ RoHS COMPLIANT.
ꢀ
ꢀ
ꢀ
Marker lights (e.g. steps, exit ways, etc.)
Lighting for special effects (e.g. starry sky)
Substitute for miniature flashlight
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 1 OF 7
CHECKED: Allen Liu
ERP:1101015417
Selection Guide
Note2
Note3
Viewing
luminous Intensity
Iv(mcd) @ 20mA
Φv (mlm)
@ 20mA
Note1
Angle
Part No.
Dice
Lens Type
Typ.
Min.
480
Typ.
2θ1/2
20°
WP7114RWC/A
WHITE (InGaN)
WATER CLEAR
1200
400
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
Symbol
Pt
Value
114
5
Unit
mW
V
Reverse Voltage
VR
Junction temperature
Operating Temperature
Storage Temperature
DC Forward Current
TJ
110
°C
Top
Tstg
IF
-40 To +85
-40 To +100
30
°C
°C
mA
Note4
IFM
100
mA
Peak Forward Current
Thermal resistance
Note5
Rth JA
Rth JS
350
130
°C/W
°C/W
Junction/ambient
Junction/solder point
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad),
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Value
Unit
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.]
Note1
0.33
-
X
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.]
Note1
0.34
-
Y
Forward Voltage IF=20mA [Min.]
Forward Voltage IF=20mA [Typ.]
Forward Voltage IF=20mA [Max.]
2.7
3.3
3.8
0.01
10
Note2
V
VF
Reverse Current (VR=5V)
Reverse Current (VR=5V)
[Typ.]
IR
µA
[Max.]
Temperature coefficient of x
10-3 /°C
10-3 /°C
mV/°C
TC x
TCy
TCV
-0.1
-0.2
-2.5
IF=20mA, -10°C≤ T≤100°C
[Typ.]
Temperature coefficient of y
IF=20mA, -10°C≤ T≤100°C
[Typ.]
Temperature coefficient of VF
IF=20mA, -10°C≤ T≤100°C
[Typ.]
Notes:
1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates.
2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V.
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 2 OF 7
CHECKED: Allen Liu
ERP:1101015417
Brightness codes
Note1
Note2
luminous Intensity
Φv (mlm)
@ 20mA
Iv(mcd) @ 20mA
Code.
Min.
Max.
750
Typ.
200
S
480
T
650
1100
1500
1800
2100
2500
3000
3300
3800
4500
5500
300
U
900
400
V
1200
500
W
1500
600
X
1800
750
Y
2200
900
Z
2500
1000
1200
1400
1600
ZA
2800
ZB
ZC
3300
3800
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the
typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
White
WP7114RWC/A
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 3 OF 7
ERP:1101015417
White
WP7114RWC/A
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 4 OF 7
CHECKED: Allen Liu
ERP:1101015417
Color Codes
WP7114RWC/A
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 5 OF 7
CHECKED: Allen Liu
ERP:1101015417
WP7114RWC/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 6 OF 7
CHECKED: Allen Liu
ERP:1101015417
PACKING & LABEL SPECIFICATIONS
WP7114RWC/A
SPEC NO: DSAG2583
APPROVED: J. Lu
REV NO: V.3
DATE: MAY/22/2006
DRAWN: W.J.ZHU
PAGE: 7 OF 7
CHECKED: Allen Liu
ERP:1101015417
相关型号:
©2020 ICPDF网 联系我们和版权申明