L-42WUM/1EGW [KINGBRIGHT]
T-1 DUAL COLOR LED, HIGH EFFICIENCY RED/GREEN, 3mm, ROHS COMPLIANT PACKAGE-3;型号: | L-42WUM/1EGW |
厂家: | KINGBRIGHT CORPORATION |
描述: | T-1 DUAL COLOR LED, HIGH EFFICIENCY RED/GREEN, 3mm, ROHS COMPLIANT PACKAGE-3 功效 光电 |
文件: | 总3页 (文件大小:84K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3mm RIGHT ANGLE LED INDICATOR
P/N: L-42WUM/1EGW
HIGH EFFICIENCY RED
GREEN
Features
Description
ꢀPRE-TRIMMED LEADS FOR PC MOUNTING.
ꢀI.C.COMPATIBLE.
The High Efficiency Red source color devices are
made With Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode.
ꢀBLACK CASE ENHANCES CONTRAST RATIO.
ꢀWIDE VIEWING ANGLE.
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
ꢀHIGH RELIABILITY-LIFE MEASURED IN YEARS.
ꢀUL RATING:94V-0.
ꢀHOUSING MATERIAL:TYPE 66 NYLON.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAC8919
APPROVED: J. Lu
REV NO: V.6
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
13
2θ1/2
HIGH EFFICIENCY RED (GaAsP/GaP)
GREEN (GaP)
4
4
L-42WUM/1EGW
Note:
WHITE DIFFUSED
100°
13
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
High Efficiency Red
Green
627
565
Peak Wavelength
nm
nm
nm
pF
V
IF=20mA
λpeak
High Efficiency Red
Green
625
568
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
λD
∆λ1/2
C
High Efficiency Red
Green
45
30
High Efficiency Red
Green
15
15
VF=0V;f=1MHz
IF=20mA
High Efficiency Red
Green
2.0
2.2
2.5
2.5
VF
Forward Voltage
High Efficiency Red
Green
10
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Green
Units
mW
mA
Power dissipation
DC Forward Current
105
30
105
25
Peak Forward Current [1]
Reverse Voltage
160
5
140
5
mA
V
Operating/storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAC8919
APPROVED: J. Lu
REV NO: V.6
CHECKED: Allen Liu
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 2 OF 3
High Efficiency Red / Green
L-42WUM/1EGW
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAC8919
APPROVED: J. Lu
REV NO: V.6
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 3 OF 3
CHECKED: Allen Liu
相关型号:
L-42WUM/1EYW
T-1 DUAL COLOR LED, HIGH EFFICIENCY RED/YELLOW, 3mm, ROHS COMPLIANT PACKAGE-3
KINGBRIGHT
L-43ID
Single Color LED, High Efficiency Red, Diffused Red, T1-1/2, 4mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明