L-42WUM/1EYW [KINGBRIGHT]
T-1 DUAL COLOR LED, HIGH EFFICIENCY RED/YELLOW, 3mm, ROHS COMPLIANT PACKAGE-3;
| 型号： | L-42WUM/1EYW |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | T-1 DUAL COLOR LED, HIGH EFFICIENCY RED/YELLOW, 3mm, ROHS COMPLIANT PACKAGE-3 功效 光电 |
| 文件： | 总3页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3mm RIGHT ANGLE LED INDICATOR
P/N: L-42WUM/1EYW
HIGH EFFICIENCY RED
YELLOW
Features
Description
ꢀPRE-TRIMMED LEADS FOR PC MOUNTING.
ꢀI.C.COMPATIBLE.
The High Efficiency Red source color devices are made
With Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode.
ꢀBLACK CASE ENHANCES CONTRAST RATIO.
ꢀWIDE VIEWING ANGLE.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
ꢀHIGH RELIABILITY-LIFE MEASURED IN YEARS.
ꢀUL RATING:94V-0.
ꢀHOUSING MATERIAL:TYPE 66 NYLON.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAE7190
APPROVED: J. Lu
REV NO: V.4
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
mPart No.
Dice
Lens Type
Min.
Typ.
13
2θ1/2
HIGH EFFICIENCY RED (GaAsP/GaP)
YELLOW (GaAsP/GaP)
4
L-42WUM/1EYW
Note:
WHITE DIFFUSED
100°
2.6
6
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
High Efficiency Red
Yellow
627
590
Peak Wavelength
nm
IF=20mA
λpeak
High Efficiency Red
Yellow
625
588
Dominant Wavelength
Spectral Line Half-width
Capacitance
nm
nm
pF
V
IF=20mA
IF=20mA
λD
∆λ1/2
C
High Efficiency Red
Yellow
45
35
High Efficiency Red
Yellow
15
20
VF=0V;f=1MHz
IF=20mA
High Efficiency Red
Yellow
2.0
2.1
2.5
2.5
VF
Forward Voltage
High Efficiency Red
Yellow
10
10
IR
Reverse Current
uA
VR= 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Yellow
Units
mW
mA
mA
V
Power dissipation
105
30
105
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
160
140
5
Operating/storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAE7190
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 2 OF 3
High Efficiency Red / Yellow
L-42WUM/1EYW
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAE7190
APPROVED: J. Lu
REV NO: V.4
DATE: NOV/17/2005
DRAWN: W.J.ZHU
PAGE: 3 OF 3
CHECKED: Allen Liu
相关型号：
L-43ID
Single Color LED, High Efficiency Red, Diffused Red, T1-1/2, 4mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明