L-42WUM/1GYWT [KINGBRIGHT]
T-1 DUAL COLOR LED, YELLOW/GREEN, 3mm, ROHS COMPLIANT PACKAGE-3;型号: | L-42WUM/1GYWT |
厂家: | KINGBRIGHT CORPORATION |
描述: | T-1 DUAL COLOR LED, YELLOW/GREEN, 3mm, ROHS COMPLIANT PACKAGE-3 光电 |
文件: | 总6页 (文件大小:515K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3mm RIGHT ANGLE LED INDICATOR
Part Number: L-42WUM/1GYWT
Green
Yellow
數位簽署者:cuifen
DN:cn=cuifen,o,
ou=SPEC專用,
email=rd02_p40@ cn.
cuifencom,c=<無>
日期 2013.09.27
09:39:06+08'00'
Features
Description
z Pre-trimmed leads for pc mounting.
z Black case enhances contrast ratio.
z Wide viewing angle.
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
z High reliability-life measured in years.
z Housing UL rating:94V-0.
z Housing material: type 66 nylon.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1102005029
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
10
2θ1/2
Green (GaP)
Yellow (GaAsP/GaP)
4
2
L-42WUM/1GYWT
Notes:
White Diffused
100°
6
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
Green
Yellow
565
590
λpeak
Peak Wavelength
nm
m
nm
pF
V
IF=20mA
Green
Yellow
568
588
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
Green
Yellow
30
35
Green
Yellow
5
2
VF=0V;f=1MHz
IF=20mA
Gre
llow
2.2
2.1
2.5
2.5
VF [2]
IR
Forward Voltage
n
ello
10
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
62.5
25
Yellow
Units
mW
mA
mA
V
Power dissipation
75
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
140
140
5
Operating / Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
CHECKED: Allen Liu
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 2 OF 6
ERP: 1102005029
L-42WUM/1GYWT
Green
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1102005029
Yellow
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1102005029
PACKING & LABEL SPECIFICATIONS
L-42WUM/1GYWT
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1102005029
SPEC NO: DSAH5725
APPROVED: WYNEC
REV NO: V.6B
DATE: SEP/26/2013
DRAWN: D.N.Huang
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1102005029
相关型号:
L-43ID
Single Color LED, High Efficiency Red, Diffused Red, T1-1/2, 4mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明