AA3021YS [KINGBRIGHT]
Single Color LED, Yellow, Water Clear, T-1, 2.5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2;型号: | AA3021YS |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, Yellow, Water Clear, T-1, 2.5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2 光电 |
文件: | 总6页 (文件大小:275K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.0x2.0mm SURFACE MOUNT LED LAMP
數位簽署者:yalin
DN:cn=yalin,o,
ou=SPEC 專用,
email=yalin@ yalin.
com,c=<無>
yal
in
日期 2011.12.06
07:55:45+08'00'
Part Number: AA3021YS
Yellow
Features
Description
z 3.0mm x 2.0mm, 1.3mm high, only minimum space
required.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
z Suitable for compact optoelectronic applications.
z Low power consumption.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201007016
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201007016
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
AA3021YS
Notes:
Yellow (GaAsP/GaP)
Water Clear
8
15
125°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Typ.
590
588
35
Max.
Units
Test Conditions
IF=20mA
nm
nm
nm
pF
V
IF=20mA
IF=20mA
20
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
75
30
140
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
CHECKED: Allen Liu
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 3 OF 6
ERP: 1201007016
Yellow
AA3021YS
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
CHECKED: Allen Liu
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 4 OF 6
ERP: 1201007016
AA3021YS
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201007016
PACKING & LABEL SPECIFICATIONS
AA3021YS
SPEC NO: DSAL0968
APPROVED: WYNEC
REV NO: V.3B
DATE: DEC/04/2011
DRAWN: D.M.Su
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201007016
相关型号:
AA3022ES-4.5SF
Single Color LED, High Efficiency Red, Water Clear, T-1, 3mm, 3 X 2.2 MM, ROHS COMPLIANT, PLASTIC PACKAGE-2
KINGBRIGHT
AA3022IT-4.5SF
Single Color LED, High Efficiency Red, Red Transparent, 2.5mm, 3 X 2.20 MM, 1.50 MM HEIGHT, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明