AA3022ES-4.5SF [KINGBRIGHT]
Single Color LED, High Efficiency Red, Water Clear, T-1, 3mm, 3 X 2.2 MM, ROHS COMPLIANT, PLASTIC PACKAGE-2;
| 型号： | AA3022ES-4.5SF |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, High Efficiency Red, Water Clear, T-1, 3mm, 3 X 2.2 MM, ROHS COMPLIANT, PLASTIC PACKAGE-2 功效 光电 |
| 文件： | 总6页 (文件大小：247K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.0x2.2mm SINGLE COLOR SURFACE MOUNT
LED LAMP
Part Number: AA3022ES-4.5SF
High Efficiency Red
Features
Description
z 3.0mm x 2.2mm SMT LED, 1.5mm thickness.
z White reflector to maximize reflection of light.
z Ultra-compact type assures space saving.
z High efficiency & low power consumption.
z Package : 1500pcs / reel.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201007048
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201007048
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
AA3022ES-4.5SF
Notes:
High Efficiency Red (GaAsP/GaP)
Water Clear
12
25
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
627
625
45
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
IF=20mA
IF=20mA
15
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2
2.5
10
V
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
75
30
160
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201007048
High Efficiency Red
AA3022ES-4.5SF
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 4 OF 6
ERP: 1201007048
AA3022ES-4.5SF
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201007048
PACKING & LABEL SPECIFICATIONS
AA3022ES-4.5SF
數位簽署者：yal
：cn=yal n,o,
ou= 專用,
emai n@ yalin.com,
c= 無>
in
D
N
i
SPEC
l
=
yal
i
<
yalin
日期 2010.10.06
10:15:02 08'00'
+
SPEC NO: DSAL0969
APPROVED: WYNEC
REV NO: V.1
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201007048
相关型号：
AA3022IT-4.5SF
Single Color LED, High Efficiency Red, Red Transparent, 2.5mm, 3 X 2.20 MM, 1.50 MM HEIGHT, SMT, 2 PIN
KINGBRIGHT
AA3022SGS-4.5SF
Single Color LED, Super Bright Green, Water Clear, T-1, 3mm, 3 X 2.2 MM, ROHS COMPLIANT, PLASTIC PACKAGE-2
KINGBRIGHT
AA3022SGT-4.5SF
Single Color LED, Super Bright Green, Green Transparent, 2.5mm, 3 X 2.20 MM, 1.50 MM HEIGHT, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明