AA3021ZGS [KINGBRIGHT]
Single Color LED, Green, Water Clear, 2.7mm, ROHS COMPLIANT, PLASTIC PACKAGE-2;
| 型号： | AA3021ZGS |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, Green, Water Clear, 2.7mm, ROHS COMPLIANT, PLASTIC PACKAGE-2 光电 |
| 文件： | 总6页 (文件大小：354K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.0 x 2.0 mm Surface Mount LED Lamp
Part Number: AA3021ZGS
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 3.0 mm x 2.0 mm, 1.3 mm high, only minimum space required
z Suitable for compact optoelectronic applications
z Low power consumption
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z Package: 2000 pcs / reel
z Moisture sensitivity level: 3
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z RoHS compliant
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201006664
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201006664
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
AA3021ZGS
Notes:
Green (InGaN)
Water Clear
400
800
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Typ.
515
525
30
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Green
IF=20mA
Green
IF=20mA
Green
45
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Green
3.3
4.1
50
V
Reverse Current
Green
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
102.5
25
Units
mW
mA
Power dissipation
DC Forward Current
Peak Forward Current [1]
150
mA
Electrostatic Discharge Threshold (HBM)
450
5
V
V
Reverse Voltage
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201006664
Green
AA3021ZGS
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201006664
AA3021ZGS
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201006664
PACKING & LABEL SPECIFICATIONS
AA3021ZGS
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAL0018
APPROVED: Wynec
REV NO: V.5B
DATE: MAR/18/2017
DRAWN: W.Q.Zhong
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201006664
相关型号：
AA3022ES-4.5SF
Single Color LED, High Efficiency Red, Water Clear, T-1, 3mm, 3 X 2.2 MM, ROHS COMPLIANT, PLASTIC PACKAGE-2
KINGBRIGHT
AA3022IT-4.5SF
Single Color LED, High Efficiency Red, Red Transparent, 2.5mm, 3 X 2.20 MM, 1.50 MM HEIGHT, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明