F1G5C [ITF]
SAW Bandpass Filter F1G5C; SAW带通滤波器F1G5C型号: | F1G5C |
厂家: | INTEGRATED TECHNOLOGY FUTURE |
描述: | SAW Bandpass Filter F1G5C |
文件: | 总7页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAW Bandpass Filter F1G5C
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
GPS applications
Usable bandwidth of 2 MHz
No impedance matching require for operation at 50 Ω
SMD Package 2.0 mm × 1.6 mm× 0.75 mm
Single-ended Operation
RoHS Compliant
Package Dimensions
3
2
3
2
4
4
1
g
1
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
1
3
Input
Output
2, 4
Case ground
Maximum Ratings
Parameters
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-40
-40
-
25
25
-
85
85
10
℃
Power Handling Capability
dBm
Electrostatics Sensitive Device (ESD)
Part No.
F1G5C
2011-07-27
NCMG01-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Rev. Date
Rev.
1/7
SAW Bandpass Filter F1G5C
Specifications
Fc = 1575.42 MHz
Terminating source impedance : 50Ω
Terminating load impedance
: 50Ω
Minimum
Typical
1575.42
1.2
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
Insertion Loss (Fo +/- 1 MHz)
Amplitude Ripple (Fo +/- 1 MHz)
VSWR (Fo +/- 1 MHz)
1.6
1.0
2.0
0.1
dBp-p
1.2
Relative Attenuation
D.C. ~ 1000 MHz
1500 MHz
20.0
33.0
30.0
25.0
34.0
38.0
39.0
32.0
-
-
-
-
dB
1625 ~ 1635 MHz
1800 ~ 3000 MHz
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
Part No.
Rev. Date
Rev.
F1G5C
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2011-07-27
NCMG01-AS01
2/7
SAW Bandpass Filter F1G5C
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
Output
50
50
Ω
Ω
Marking Configuration
2)
g1)
1) Marking Number
2) Year / Month Code
Part No.
Rev. Date
Rev.
F1G5C
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2011-07-27
NCMG01-AS01
3/7
SAW Bandpass Filter F1G5C
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F1G5C
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2011-07-27
NCMG01-AS01
4/7
SAW Bandpass Filter F1G5C
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
F1G5C
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2011-07-27
NCMG01-AS01
5/7
SAW Bandpass Filter F1G5C
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~ 15 degree
Carrier tape
Part No.
Rev. Date
Rev.
F1G5C
2011-07-27
NCMG01-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
6/7
SAW Bandpass Filter F1G5C
Carrier Tape Dimensions [unit : mm]
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
F1G5C
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2011-07-27
NCMG01-AS01
7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明