F1G64 [ITF]
SAW Bandpass Filter F1G64; SAW带通滤波器F1G64型号: | F1G64 |
厂家: | INTEGRATED TECHNOLOGY FUTURE |
描述: | SAW Bandpass Filter F1G64 |
文件: | 总7页 (文件大小:157K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAW Bandpass Filter F1G64
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF Bandpass Filter
High attenuation
balanced-single operation ( balance 200Ω / single 50Ω )
Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm )
RoHS Compliant
Package Dimensions
3.00± 0.15
8
8
1
2
3
7
6
5
7
6
1
2
I
1G64
5
3
4
4
0.75
0.60
Pin Configurations
7
Input ( + )
Input ( - )
Output
Dimensions shown are nominal in millimeters
5
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
1, 3, 4, 6, 8
Ground
Maximum Ratings
Parameter
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-40
-50
-
25
25
-
85
95
10
℃
Power Handling Capability
dBm
Electrostatics Sensitive Device (ESD)
Part No.
Rev. Date
Rev.
F1G64
2012-08-30
NCNH01-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
1/7
SAW Bandpass Filter F1G64
Specifications
Fc = 1680.0 MHz
Minimum
Typical
1680.0
3.1
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
Insertion Loss (1650~1710 MHz)
Amplitude Ripple (1650~1710 MHz)
VSWR (1650~1710 MHz)
5.0
2.0
2.5
1.0
dBp-p
1.8
Relative Attenuation
0.3 ~ 1580.0 MHz
42
42
60
49
-
-
dB
1800.0 ~ 3000.0 MHz
Input/Output Impedance
Balance 200 / Single 50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
Part No.
Rev. Date
Rev.
F1G64
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH01-AS01
2/7
SAW Bandpass Filter F1G64
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
L1 = 8nH
C1 = 0.5pF
Marking Configuration
1)
I 2)
1G64 3)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
Part No.
Rev. Date
Rev.
F1G64
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH01-AS01
3/7
SAW Bandpass Filter F1G64
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F1G64
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH01-AS01
4/7
SAW Bandpass Filter F1G64
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
F1G64
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH01-AS01
5/7
SAW Bandpass Filter F1G64
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~ 15 degree
Carrier tape
Part No.
Rev. Date
Rev.
F1G64
2012-08-30
NCNH01-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
6/7
SAW Bandpass Filter F1G64
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
F1G64
2012-08-30
NCNH01-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明