F1G73 [ITF]
SAW Bandpass Filter; SAW带通滤波器
| 型号： | F1G73 |
| 厂家： | 
INTEGRATED TECHNOLOGY FUTURE |
| 描述： | SAW Bandpass Filter |
| 文件： | 总7页 (文件大小：274K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Bandpass Filter F1G73
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF bandpass filter for GSM
Usable Bandwidth 45MHz
No matching single-ended operation
Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
RoHS Compliant
Package Dimension
1
2
6
5
4
6
5
4
1
2
3
I
1G73
3
Pin Configurations
Dimensions shown are nominal in millimeters
2
5
Input
Output
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-30
-40
-
25
-
85
95
13
℃
Power Handling Capability
dBm
-
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
Part No.
F1G73
2009-08-17
NC9009-AS01
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Rev. Date
Rev.
1/7
SAW Bandpass Filter F1G73
Specifications
Fo = 1732.5 MHz
Minimum
Typical
1732.5
2.5
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
Insertion Loss (In Fc ± 22.5 MHz)
Amplitude Ripple (In Fc ± 22.5 MHz)
VSWR (In Fc ± 22.5 MHz)
3.5
2.0
2.5
1.0
dB
1.6
Relative Attenuation
dB
1500.0MHz ~ 1670.0MHz
1795.0MHz ~ 2000.0MHz
25
25
37
40
-
-
Input/Output Impedance
50
Ohm
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
F1G73
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-08-17
NC9009-AS01
2/7
SAW Bandpass Filter F1G73
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
Output
50
50
Ω
Ω
Marking Configuration
1)
I2)
1G733)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
F1G73
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-08-17
NC9009-AS01
3/7
SAW Bandpass Filter F1G73
Typical Performance ( at +25℃ )
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
F1G73
2009-08-17
NC9009-AS01
4/7
SAW Bandpass Filter F1G73
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
F1G73
2009-08-17
NC9009-AS01
5/7
SAW Bandpass Filter F1G73
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~15 degree
Carrier tape
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
F1G73
2009-08-17
NC9009-AS01
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
6/7
SAW Bandpass Filter F1G73
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
F1G73
2009-08-17
NC9009-AS01
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
7/7
相关型号：
©2020 ICPDF网 联系我们和版权申明