8520DYLF [IDT]
Low Skew Clock Driver, 8520 Series, 16 True Output(s), 0 Inverted Output(s), PQFP48, 7 X 7 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, MS-026BBC, LQFP-48;型号: | 8520DYLF |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | Low Skew Clock Driver, 8520 Series, 16 True Output(s), 0 Inverted Output(s), PQFP48, 7 X 7 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, MS-026BBC, LQFP-48 驱动 逻辑集成电路 |
文件: | 总12页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
GENERAL DESCRIPTION
FEATURES
The ICS8520 is a low skew, high performance • Sixteen differential LVHSTL compatible outputs
ICS
HiPerClockS™
1-to-16 Differential-to-LVHSTL Fanout Buffer and
a member of the HiPerClockS™ family of
High Performance Clock Solutions from ICS.The
ICS8520 has 1 clock input pair. The CLK, nCLK
each with the ability to drive 50Ω to ground
• One differential CLK, nCLK input pair
• CLK, nCLK pair can accept the following differential
input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL
pair can accept most standard differential input levels.
Guaranteed output skew, part-to-part skew and crossover
voltage characteristics make the ICS8520 ideal for inter-
facing to today’s most advanced microprocessor and static
RAMs.
• Maximum output frequency: 500MHz
• Translates single ended input levels to LVHSTL
levels with resistor bias nCLK input
• Output skew: 110ps (maximum)
• Part-to-part skew: 450ps (maximum)
• Propagation delay: 1.6ns (maximum)
• VOH: 1.3V (maximum)
• 40% of VOH ≤ Vcrossover ≤ 60% of VOH
• 3.3V core, 1.8V output operating supply voltages
• 0°C to 70°C ambient operating temperature
• Available in both standard and lead-free RoHS-compliant
packages
BLOCK DIAGRAM
PIN ASSIGNMENT
CLK
nCLK
48 47 46 45 44 43 42 41 40 39 38 37
Q0
Q15
CLK
VDDO
nQ0
Q0
VDDO
Q11
nQ11
Q10
nQ10
GND
Q9
1
36
35
34
33
32
31
30
29
28
27
26
25
nQ0
nQ15
2
Q1
nQ1
Q14
nQ14
3
4
nQ1
Q1
5
Q2
nQ2
Q13
nQ13
6
ICS8520
GND
nQ2
Q2
7
Q3
nQ3
Q12
nQ12
nQ9
Q8
8
9
Q11
nQ11
Q4
nQ4
nQ3
Q3
nQ8
VDDO
VDD
10
11
12
Q10
nQ10
VDDO
Q5
nQ5
13 14 15 16 17 18 19 20 21 22 23 24
Q9
nQ9
Q6
nQ6
Q8
nQ8
Q7
nQ7
48-Lead LQFP
7mm x 7mm x 1.4mm body package
Y Package
TopView
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
1
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 1. PIN DESCRIPTIONS
Number
Name
Type
Description
1, 11, 14, 24,
25, 35, 38, 48
VDDO
Power
Output supply pins.
2, 3
4, 5
Q11, nQ11
Q10, nQ10
GND
Output
Output
Power
Output
Output
Power
Output
Output
Output
Output
Output
Output
Output
Output
Input
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Power supply ground.
6, 19, 30, 43
7, 8
Q9, nQ9
Q8, nQ8
VDD
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Power supply pins.
9, 10
12, 13
15, 16
17, 18
20, 21
22, 23
26, 27
28, 29
31, 32
33, 34
36
Q7, nQ7
Q6, nQ6
Q5, nQ5
Q4, nQ4
Q3, nQ3
Q2, nQ2
Q1, nQ1
Q0, nQ0
CLK
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface level
Differential output pair. LVHSTL interface level
Pulldown Non inverting differential clock input.
37
nCLK
Input
Pullup
Inverting differential clock input.
39, 40
41, 42
44, 45
46, 47
Q15, nQ15
Q14, nQ14
Q13, nQ13
Q12, nQ12
Output
Output
Output
Output
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
Differential output pair. LVHSTL interface levels.
NOTE: Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values.
TABLE 2. PIN CHARACTERISTICS
Symbol
CIN
Parameter
Test Conditions
Minimum Typical
Maximum Units
Input Capacitance
Input Pullup Resistor
4
pF
kΩ
kΩ
RPULLUP
51
51
RPULLDOWN Input Pulldown Resistor
TABLE 3. FUNCTION TABLE
Inputs
Outputs
Input to Output Mode
Polarity
CLK
nCLK
Q0:Q15
nQ0:nQ15
HIGH
LOW
0
1
LOW
HIGH
LOW
HIGH
HIGH
LOW
Differential to Differential
Differential to Differential
Single Ended to Differential
Single Ended to Differential
Single Ended to Differential
Single Ended to Differential
Non Inverting
Non Inverting
Non Inverting
Non Inverting
Inverting
1
0
0
Biased; NOTE 1
HIGH
LOW
1
Biased; NOTE 1
Biased; NOTE 1
Biased; NOTE 1
0
1
LOW
HIGH
Inverting
NOTE 1: Please refer to the Application Information Section, "Wiring the Differential input to accept single ended levels".
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
2
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
ABSOLUTE MAXIMUM RATINGS
SupplyVoltage, V
4.6V
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device.These ratings are stress specifications only.Functional
operation of product at these conditions or any conditions be-
yond those listed in the DC Characteristics or AC Character-
istics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
DD
Inputs, V
-0.5V to VDD + 0.5 V
-0.5V to VDDO + 0.5V
47.9°C/W (0 lfpm)
-65°C to 150°C
I
Outputs, VO
PackageThermal Impedance, θ
JA
StorageTemperature, T
STG
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, VDD = 3.3V 5%, VDDO = 1.8V 0.2V, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum Units
VDD
VDDO
IDD
Positive Supply Voltage
3.135
3.3
3.465
2.0
V
Output Supply Voltage
Power Supply Current
Output Supply Current
1.6
1.8
V
190
10
mA
mA
IDDO
TABLE 4B. DIFFERENTIAL DC CHARACTERISTICS, VDD = 3.3V 5%, VDDO = 1.8V 0.2V, TA = 0°C TO 70°C
Symbol
Parameter
Test Conditions
Minimum
Typical
Maximum Units
CLK
V
IN = VDD = 3.465V
VIN = VDD = 3.465V
IN = 0V, VDD = 3.465V
150
1
µA
µA
µA
µA
V
IIH
Input High Current
nCLK
CLK
V
-1
IIL
Input Low Current
nCLK
VIN = 0V, VDD = 3.465V
-150
0.15
VPP
Peak-to-Peak Input Voltage
1.3
Common Mode Voltage Range;
NOTE 1, 2
VCMR
GND + 0.5
VDD - 0.85
V
NOTE 1: Common mode voltage is defined as VIH.
NOTE 2: For single ended applications, the maximum input voltage for CLK, nCLK is VDD + 0.3V.
TABLE 4C. LVHSTL DC CHARACTERISTICS, VDD = 3.3V 5%, VDDO = 1.8V 0.2V, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum
Units
Output High Voltage;
NOTE 1
VOH
0.9
1.3
V
Output Low Voltage;
NOTE 1
VOL
VOX
0
0.4
V
V
Output Crossover Voltage
40% x (VOH–VOL) + VOL
60% x (VOH–VOL) + VOL
NOTE 1: Outputs terminated with 50Ω to ground.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
3
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 5. AC CHARACTERISTICS, VDD = 3.3V 5%, VDDO = 1.8V 0.2V, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum Typical
Maximum
500
1.6
Units
MHz
ns
fMAX
Output Frequency
tPD
Propagation Delay, Low-to-High; NOTE 1
Output Skew; NOTE 2, 4
1.1
1.3
tsk(o)
tsk(pp)
110
450
900
600
52
ps
Part-to-Part Skew; NOTE 3, 4
ƒ ≤ 400MHz
ƒ ≤ 300MHz
ƒ > 300MHz
ps
200
200
48
ps
tR/tF
Output Rise/Fall Time
ps
ƒ ≤ 133MHz
%
odc
Output Duty Cycle
133MHz < IJ 300MHz
ƒ > 300MHz
46
54
%
42
58
%
NOTE 1: Measured from the differential input crossing point to the differential ouput crossing point.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at the output differential cross points.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages
and with equal load conditions. Using the same type of inputs on each device, the outputs are measured
at the differential cross points.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
4
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
PARAMETER MEASUREMENT INFORMATION
3.3V 5%
1.8V 0.2V
VDD
SCOPE
VDD
Qx
VDDO
nCLK
CLK
VPP
VCMR
Cross Points
HSTL
GND
nQx
GND
0V
3.3V/1.8V OUTPUT LOAD AC TEST CIRCUIT
DIFFERENTIAL INPUT LEVEL
nQx
Qx
Qx
PART 1
nQx
Qy
nQy
PART 2
nQy
Qy
tsk(pp)
tsk(o)
OUTPUT SKEW
PART-TO-PART SKEW
nCLK
CLK
80%
80%
tR
VSWING
20%
Clock
Outputs
nQ0:nQ15
20%
tF
Q0:Q15
tPD
OUTPUT RISE/FALL TIME
PROPAGATION DELAY
nQ0:nQ15
Q0:Q15
tPW
tPERIOD
tPW
odc =
x 100%
tPERIOD
OUTPUT DUTY CYCLE/PULSE WIDTH/PERIOD
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
5
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
APPLICATION INFORMATION
RECOMMENDATIONS FOR UNUSED OUTPUT PINS
OUTPUTS:
LVHSTL OUTPUT
All unused LVHSTL outputs can be left floating.We recommend
that there is no trace attached. Both sides of the differential
output pair should either be left floating or terminated.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
6
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
POWER CONSIDERATIONS
This section provides information on power dissipation and junction temperature for the ICS8520.
Equations and example calculations are also provided.
1. Power Dissipation.
The total power dissipation for the ICS8520 is the sum of the core power plus the power dissipated in the load(s).
The following is the power dissipation for VDD = 3.3V + 5% = 3.465V, which gives worst case results.
NOTE: Please refer to Section 3 for details on calculating power dissipated in the load.
•
•
Power (core)MAX = VDD_MAX * IDD_MAX = 3.465V * 190mA = 658.4mW
Power (outputs)MAX = 32.6mW/Loaded Output pair
If all outputs are loaded, the total power is 16 * 32.6mW = 521.6mW
Total Power_MAX (3.465V, with all outputs switching) = 658.4mW + 521.6mW = 1180mW
2. Junction Temperature.
Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the
device.The maximum recommended junction temperature for HiPerClockSTM devices is 125°C.
The equation for Tj is as follows: Tj = θJA * Pd_total + TA
Tj = JunctionTemperature
θJA = Junction-to-AmbientThermal Resistance
Pd_total =Total Device Power Dissipation (example calculation is in section 1 above)
TA = AmbientTemperature
In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance θJA must be used. Assuming a
moderate air flow of 200 linear feet per minute and a multi-layer board, the appropriate value is 42.1°C/W perTable 6 below.
Therefore, Tj for an ambient temperature of 70°C with all outputs switching is:
70°C + 1.18W * 42.1°C/W = 119.7°C. This is below the limit of 125°C
This calculation is only an example.Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow,
and the type of board (single layer or multi-layer).
TABLE 6. THERMAL RESISTANCE θJA FOR 48-PIN LQFP, FORCED CONVECTION
θJA byVelocity (Linear Feet per Minute)
0
200
55.9°C/W
42.1°C/W
500
50.1°C/W
39.4°C/W
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
67.8°C/W
47.9°C/W
NOTE: Most modern PCB designs use multi-layered boards.The data in the second row pertains to most designs.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
7
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
3. Calculations and Equations.
The purpose of this section is to derive the power dissipated into the load.
LVHSTL output driver circuit and termination are shown in Figure 1.
VDDO
Q1
VOUT
RL
50Ω
FIGURE 1. LVHSTL DRIVER CIRCUIT AND TERMINATION
To calculate worst case power dissipation into the load, use the following equations which assume a 50Ω load.
Pd_H is power dissipation when the output drives high.
Pd_L is the power dissipation when the output drives low.
Pd_H = (V
Pd_L = (V
/R ) * (V
- V
- V
)
)
OH_MIN
L
DDO_MAX
OH_MIN
/R ) * (V
OL_MAX
L
DDO_MAX
OL_MAX
Pd_H = (0.9V/50Ω) * (2V - 0.9V) = 19.8mW
Pd_L = (0.4V/50Ω) * (2V - 0.4V) = 12.8mW
Total Power Dissipation per output pair = Pd_H + Pd_L = 32.6mW
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
8
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
RELIABILITY INFORMATION
TABLE 7. θJAVS. AIR FLOWTABLE FOR 48 LEAD LQFP
θJA byVelocity (Linear Feet per Minute)
0
200
55.9°C/W
42.1°C/W
500
50.1°C/W
39.4°C/W
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
67.8°C/W
47.9°C/W
NOTE: Most modern PCB designs use multi-layered boards.The data in the second row pertains to most designs.
TRANSISTOR COUNT
The transistor count for ICS8520 is: 1563
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
9
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
PACKAGE OUTLINE -Y SUFFIX FOR 48 LEAD LQFP
TABLE 8. PACKAGE DIMENSIONS
JEDEC VARIATION
ALL DIMENSIONS IN MILLIMETERS
BBC
SYMBOL
MINIMUM
NOMINAL
MAXIMUM
N
A
48
--
--
--
1.60
0.15
1.45
0.27
0.20
A1
A2
b
0.05
1.35
0.17
0.09
1.40
0.22
c
--
D
9.00 BASIC
7.00 BASIC
5.50 Ref.
9.00 BASIC
7.00 BASIC
5.50 Ref.
0.50 BASIC
0.60
D1
D2
E
E1
E2
e
L
0.45
0.75
θ
--
0°
7°
ccc
--
--
0.08
Reference Document: JEDEC Publication 95, MS-026
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
10
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 9. ORDERING INFORMATION
Part/Order Number
Marking
Package
Shipping Packaging Temperature
ICS8520DY
ICS8520DYT
ICS8520DYLF
ICS8520DYLFT
ICS8520DY
ICS8520DY
48 Lead LQFP
tray
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
48 Lead LQFP
1000 tape & reel
tray
ICS8520DYLF
ICS8520DYLF
48 Lead "Lead-Free" LQFP
48 Lead "Lead-Free" LQFP
1000 tape & reel
NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries.
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use
or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use
in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are
not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS
product for use in life support devices or critical medical instruments.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
11
ICS8520
LOW SKEW, 1-TO-16
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
REVISION HISTORY SHEET
Description of Change
Rev
Table
Page
Date
1
Features Section - added Lead-Free bullet.
T2
2
3
Pin Characteristics Table - changed CIN from 4pF max. to 4pF typical.
T4A
Power Supply DC Characteristics Table - corrected units of measure for IDDO
from µA to mA.
B
12/14/05
6
Added Recommendations for Unused Output Pins.
T9
11
Ordering Information Table - added Lead-Free part number, marking and note.
8520DY
www.icst.com/products/hiperclocks.html
REV.B DECEMBER 14, 2005
12
相关型号:
8520DYT
Clock Driver, 8520 Series, 16 True Output(s), 0 Inverted Output(s), PQFP48, 7 X 7 MM, 1.40 MM HEIGHT, MS-026BBC, LQFP-48
IDT
85210AY-21
Clock Driver, 85210 Series, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, MS-026BBA, LQFP-32
IDT
85210AY-21T
Clock Driver, 85210 Series, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, MS-026BBA, LQFP-32
IDT
85210AY-31
Low Skew Clock Driver, 85210 Series, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, MS-026BBA, LQFP-32
IDT
85210AY-31LF
Low Skew Clock Driver, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, MS-026, LQFP-32
IDT
85210AY-31T
Low Skew Clock Driver, 85210 Series, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, MS-026BBA, LQFP-32
IDT
85211AMI-01
Clock Driver, 85211 Series, 2 True Output(s), 0 Inverted Output(s), PDSO8, 3.90 X 4.90 MM, 1.37 MM HEIGHT, MS-012, SOIC-8
IDT
85211AMI-01T
Clock Driver, 85211 Series, 2 True Output(s), 0 Inverted Output(s), PDSO8, 3.90 X 4.90 MM, 1.37 MM HEIGHT, MS-012, SOIC-8
IDT
85211AMI-03LF
Clock Driver, 85211 Series, 2 True Output(s), 0 Inverted Output(s), PDSO8, 3.90 X 4.90 MM, 1.37 MM HEIGHT, ROHS COMPLIANT, MS-012, SOIC-8
IDT
©2020 ICPDF网 联系我们和版权申明