FH28H-80S-0.5SH(07) [HRS]
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE;型号: | FH28H-80S-0.5SH(07) |
厂家: | HRS |
描述: | Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE PC 连接器 |
文件: | 总11页 (文件大小:822K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.5 mm Pitch, 2.55 mm above the board,
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH28 Series
Secure actuator lock and retention
Hold in place by metal fittings
wn
Hold in place by contacts
■Overview
FPC temporary hold protrusion
Continuing market trends demand higher contact count
connectors while maintaining high electrical/mechanical
reliability, exact FPC/FFC positioning and durability.
■Features
1. Precise FFC/FPC positionining
Large angle of the actuator opening and built-in side guides in the
connector allow straight and exact insertion of the FPC / FFC.
2. Rotating actuator
Proven rotating actuator system allows easy ZIF connection,
confirming it with a definite tactile feel. The contact securely
holds the actuator in place, providing reliable normal force.
The unique contact configuration assures that the connector
will remain dimensionally stable over the device’s life.
3. Strong FFC / FPC retention force
Horizontal direction FFC / FPC retention force : Increased
200% (as compared with FH12 series)(30 pos.)
Support straight type FPC / FFC
4. Accepts standard FPC/FFC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat cable (FFC) can be used.
5. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
6. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 2,000 connectors.
7. Halogen-free *
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
8. Optional 500 piece reel packaging
Standard packaging is 2,000 pieces per reel; however, 500
piece reels are possible.
(Emboss reel external diameter is 330mm.)
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Storage temperature range
Operating temperature range-40ç to +85ç(Note 2)
Operating humidity rangeRelative humidity 90% max.
(No condensation)
Rated current 0.5A DC(Note.1)
Rated voltage 50V AC
-10ç to +50ç (Note 3)
Storage humidity range
Relative humidity 90% max
Rating
Recommended FPC/FFC
Item
Thickness: = 0.3 0.05mm Gold plated contact traces
Specification
Conditions
1.Insulation resistance 500 Mø min
100 V DC
2.Withstanding voltage No flashover or insulation breakdown.
150 V AC /one minute
1 mA (DC or 1000Hz)
50 mø max.
3.Contact resistance
* Including FPC/FFC conductor resistance
4.Durability
Contact resistance: 50 mø max.
20 cycles
(insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs or more.
Frequency: 10 to 55 Hz, single amplitude of 0.75
mm, 10 cycles in each of the 3 directions.
5.Vibration
6.Shock
Contact resistance: 50 mø max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs. min.
Contact resistance: 50 mø max.
No damage, cracks, or parts dislocation.
Contact resistance: 50 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation.
Contact resistance: 50 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts looseness.
No deformation of components affecting
performance.
Acceleration of 981 m/s2, 6 ms duration, sine half-
wave waveform, 3 cycles in each of the 3 axis.
96 hours at temperature of 40ç and humidity of
90% to 95%.
7.Humidity
(Steady state)
Temperature: -40ç■+15ç to+35ç■+85ç■+15ç to +35ç
Time: 30■2 to 3■30■2 to 3 (Minutes)
5 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350ç 5ç for 5 seconds
8.Temperature cycle
9.Resistance to
soldering heat
Note 1: When passing the current through all of the contacts,use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
Note.4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials / Finish
Part
Material
LCP
Finish
Remarks
UL94V-0
Insulator
Actuator
Color: Gray
Color: Black
Gold plated
Tin plated
LCP
Contacts
Metal fittings
Phosphor bronze
Brass
-------
-------
■Ordering information
FH 28 D - 50S - 0.5 SH (05)
1
2
3
4
5
6
7
Termination type : SMT horizontal mounting type
specifications
Series name
Series No.
Blank,D
H
: FH
1
2
3
6
: 28
7
(05)…Gold plated,2,000 pieces / reel
(10)…Partial gold plated,2,000 pieces / reel
(07)…Gold plated(only 40pos.),2,000 pieces / reel
(98)…Gold plated,500 pieces / reel
: Standard
: Space saving type
Number of positions : 10 to 80
Contact pitch : 0.5mm
4
5
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
Standard type
A
0.5
(0.2)
Number of contacts indicator
Polarizing mark indicator
B
6.5
5.7
2
1
2
1
0.05MAX
0
0.05MAX
0
E
(1.3)
0.1MAX
0.1MAX
0.7
1.2
4.5
C(FPC/FFC insertion slot dimension)
D
(2.85)
(3.65)
Notes
1 The coplanarity of each terminal lead is within 0.1.
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
3 Packaged on tape and reel only. Check packaging specification.
4 Sight variations in color of the plastic compounds do not affect form, fit or function.
5 After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
D
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
10
15
20
28
30
40
45
50
55
60
64
68
74
4.5
9.9
5.57
9.58
7
12.4
14.9
18.9
19.9
24.9
27.4
29.9
32.4
34.9
36.9
38.9
41.9
8.07
12.08
14.58
18.58
19.58
24.58
27.08
29.58
32.08
34.58
36.58
38.58
41.58
9.5
10.57
14.57
15.57
20.57
23.07
25.57
28.07
30.57
32.57
34.57
37.57
13.5
14.5
19.5
22
24.5
27.0
29.5
31.5
33.5
36.5
Note 1: Tape and reel packaging.
Order by number of reels.
Note 2:
Note 3:
Metal fittings protruded type (FH28E) is available.
Contact Hirose for details.
**Indicates the specification. For details, please refer to ordering information.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Space saving type
A
0.5
(0.2)
Polarizing mark indicator
Number of contacts indicator
B
6
5.7
2
1
2
1
0.05MAX
0
0.05MAX
0
E
(1.3)
0.1MAX
0.1MAX
1.2
4.5
0.7
C(FPC/FFC insertion slot dimension)
D
(2.85)
(3.15)
Notes
1 The coplanarity of each terminal lead is within 0.1.
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
3 Packaged on tape and reel only. Check packaging specification.
4 Sight variations in color of the plastic compounds do not affect form, fit or function.
5 After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
D
FH28H-80S-0.5SH(**)
586-1805-3-**
80
39.5
44.9
40.57
45.7
Note1: Tape and reel packaging.
Order by number of reels.
Note2: **Indicates the specification. For details, please refer to ordering information.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness: 0.15 mm.
H
J
0.1
0.1
H
J
0.1
0.1
0.5 0.05
0.3 0.03(Land)
0.5 0.05
0.3 0.03(Land)
0.25 0.03(Metal mask)
0.25 0.03(Metal mask)
A
0.05
A
0.05
Standard type(FH28, FH28D)
Space saving type(FH28H)
■Recommended FPC/FFC dimensions
1
0.5 0.05
0.3 0.03
0.3 0.05
0.5 0.1
A
F
0.05
0.07
0.1
0.5 0.1
G
Notes
1 Straight type FPC / FFC does not have the side-protruding retention tabs (cross-hatched areas).
2 W dimension should be 3.5mm min.
Unit: mm
J
Part Number
CL No.
Number of contacts
F
G
H
7
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
FH28H-80S-0.5SH(**)
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
CL586-1805-3-**
10
15
20
28
30
40
45
50
55
60
64
68
74
80
5.5
7.1
10.6
13.1
15.6
19.6
20.6
25.6
28.1
30.6
33.1
35.6
37.6
39.6
42.6
46.7
9.5
8
9.6
12.0
16.0
17.0
22.0
24.5
27.0
29.5
32.0
34.0
36.0
39.0
42.0
10.5
14.5
15.5
20.5
23
12.1
16.1
17.1
22.1
24.6
27.1
29.6
32.1
34.1
36.1
39.1
42.1
25.5
28.0
30.5
32.5
34.5
37.5
40.5
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■FH28 Series FPC Construction (Recommended Specifications)
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Material Name
Material
Thickness (µm)
Connecting side
Covering film layer.
Cover adhesive
Polyimide 1 mil thick.
25
25
0.2µm thick gold plated over 1 to 5µm
Surface treatment
Copper foil
3
thick nickel underplating
Cu
1oz
35
Base adhesive
Base film
25
Polyimide 1 mil thick
25
Reinforcement material adhesive Thermosetting adhesive
30
Stiffener
Polyimide 3 mil thick
Total
175
293
Back side
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Material Name
Material
Thickness (µm)
Connecting side
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
Polyimide 1 mil thick
0.2µm thick gold plated over 1 to 5µm
thick nickel underplating
3
15
18
18
25
18
18
25
25
50
100
297
Cu
Cu
1/2oz
Base adhesive
Base film
Polyimide 1 mil thick
Base adhesive
Copper foil
Cu
1/2oz
Cover adhesive
Covering layer film
Reinforcement material adhesive
Stiffener
Polyimide 1 mil thick
Thermosetting adhesive
Polyimide 1 mil thick
Total
Back side
* To prevent release of the lock due to FPC bending, use of the FPC with copper foil on the back side is NOT RECOMMENDED.
FFC : Flexible Flat Cable
3. Using FFC
Material Name
Material
Thickness (µm)
Connecting side
Polyester film
12
30
Adhesive
Thermoplastic polyester
Polyester
Gold plated annealed copper foil
Adhesive
35
30
Polyester
12
Adhesive
Polyester
Polyester
Total
30
Stiffener
188
295
Back side
4. Precautions
1. This specification is a recommendation for the construction of the FH28 Series FPC and FFC (t=0.3 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Packaging specification
■ Embossed carrier tape dimensions
2
0.15 12 0.1
(3)
4 0.1
(0.3)
(7.1)
(8.5)
Standard (FH28,FH28D)
■ Embossed carrier tape dimensions
2
0.15
12 0.1
2
0.15
12 0.1
4
0.1
4
0.1
(3)
(3)
(0.3)
(0.3)
(7.1)
(8.5)
1.5+0.1
0
(6.6)
(8)
Un-reeling direction
1.5+0.1
0
Un-reeling direction
Standard (FH28,FH28D)
Space saving type (FH28H)
(2)
■Reel Dimensions
(S:INSIDE)
(T:OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
Embossed carrier tape
Top cover tape
Blank section
Blank section
(10 pockets min.)
(10 pockets min.)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Standard (FH28,FH28D)
Unit: mm
Part Number
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
CL No.
Number of contacts
K
L
M
N
Q
S
T
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
10
15
20
28
30
40
45
50
55
60
64
68
74
24
24
24
32
32
44
44
44
44
56
56
56
56
---------- 11.5 10.3 5.5 25.4 29.4
---------- 11.5 8.8 25.4 29.4
8
---------- 11.5 15.3 10.5 25.4 29.4
28.4 14.2 19.3 14.5 33.4 37.4
28.4 14.2 20.3 15.5 33.4 37.4
40.4 20.2 25.3 20.5 33.4 37.4
40.4 20.2 27.8
23
45.4 49.4
40.4 20.2 30.3 25.5 45.4 49.4
40.4 20.2 32.8 28.0 45.4 49.4
52.4 26.2 35.3 30.5 57.4 61.4
52.4 26.2 37.3 32.5 57.4 61.4
52.4 26.2 39.3 34.5 57.4 61.4
52.4 26.2 43.3 42.3 57.4 61.4
Space saving type (FH28H)
Unit: mm
Part Number
CL No.
Number of contacts
80
K
L
M
N
Q
R
S
T
FH28H-80S-0.5SH(**)
CL586-1805-3-**
56
52.4 26.2 46.3 45.3 40.5 57.4 61.4
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended Temperature Profile
MAX 250ç
250
230ç
HRS test condition
Solder method
:Reflow, IR
200
150
100
50
200ç
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s Part
(ç)
Number:M705-221CM5-32-10.5)
150ç
Test board
:Glass epoxy
55mm∞150mm∞1.6mm thick
Land,Metal mask dimensions : Our recommendations
The temperature profiles are based on the above conditions.
25ç
(60sec.) 90 sec. to 120 sec.
Preheating
(60sec.)
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
Soldering
0
Start
60
120
Time (Seconds)
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Operation and Precautions
Operation
Precautions
1
Do not force the actuator to open beyond its fully open
position. Do not use any type of tool to open the actuator.
1.FPC/FFC insertion procedure.
Connector installed on the board.
1
Lift up the actuator. Use thumb or index finger
116°
2
Properly insert the FPC at the positioning part of the connector.
Locking the FPC while it is partially inserted, may cause lock
damage, disconnection of the FPC, or continuity fault.
2
Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
3
Do not forcefully bend the FFC/FPC upward.
Consult FFC/FPC manufacturer for the
recommended bend radiuses.
3
Rotate down the actuator until firmly closed. It is
critical that the inserted FPC/FFC is not moved and
remains fully inserted.
4
For connectors with multiple contacts, such as 80
pos. rotate down the actuator pushing at both ends.
2.FPC/FFC removal
Fully open the actuator.
Carefully withdraw the FPC/FFC exercising caution
not to deform or damage it.
5
Application of excessive force to the inserted FPC/FFC may cause damage to
connector and may affect the reliability of electrical connection.
If specific application requires continuous or repeated pull or bend of the inserted
FPC/FFC, assure that the forces are NOT transmitted directly to the connector.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Precautions (mating/un-mating FPC with the retention tabs)
Operation
Precautions
2
Avoid “ride on”
1.How to insert
Avoid insertion so the cables ride on any guide. Be
sure NOT to close the actuator as the cables ride
on any guide. It may cause conduction failure.
Insert the cable into the interspace between the
mold walls ( ) at both ends of entrance where
the connector is inserted and the guide walls (
at both ends of interior connector so the cable tabs
are properly located.
)
Ride on a left guide
Ride on a right guide
Correct insertion
2.Precautions when mating /un-mating
1
Avoid insertion in diagonal direction.
Do not insert the cable in diagonal direction.
A part of the connector may touches the contacts
resulting in deformation of the contacts.
Do not close the actuator
as the cables ride on.
Insert the cable straight into the connector and
hook the cable tabs with the guide.
After insertion, slightly pull the cables to make sure
the cable tabs are firmly secured. No removal of the
cable means correct insertion.
In the event it is locked as the cables ride on a
guide, absolutely avoid moving the cable. In this
case, open the actuator and re-insert the cable as
instructed in “1.How to insert”.
Insert the cable
straight and obliquely
from above.
1
Do not move the cables back and forth and around as the
cables ride on the guide when the actuator is closed.
Slightly pull the cable
to make sure the tabs
are firmly secured.
2
3 Close the actuator.
11
相关型号:
FH28H-80S-0.5SH(10)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH28H-80S-0.5SH(51)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH28H-80S-0.5SH(98)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH29B-100S-0.2SHW(99)
Card Edge Connector, 100 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29B-120S-0.2SHW(99)
Card Edge Connector, 120 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FH29B-34S-0.2SHW(05)
Card Edge Connector, 34 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH29B-34S-0.2SHW(99)
Card Edge Connector, 34 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
FH29B-44S-0.2SHW(99)
Card Edge Connector, 44 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29B-50S-0.2SHW(99)
Card Edge Connector, 50 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29B-60S-0.2SHW(05)
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH29B-70S-0.2SHW(99)
Card Edge Connector, 70 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
©2020 ICPDF网 联系我们和版权申明