首页 |元器件品牌

FH28H-80S-0.5SH(10) [HRS]

Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE;
FH28H-80S-0.5SH(10)
型号： FH28H-80S-0.5SH(10)
厂家： HRS    HRS
描述：

Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE

PC 连接器
文件： 总11页 (文件大小：822K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
0.5 mm Pitch, 2.55 mm above the board,  
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
FH28 Series  
Secure actuator lock and retention  
Hold in place by metal fittings  
wn  
Hold in place by contacts  
■Overview  
FPC temporary hold protrusion  
Continuing market trends demand higher contact count  
connectors while maintaining high electrical/mechanical  
reliability, exact FPC/FFC positioning and durability.  
■Features  
1. Precise FFC/FPC positionining  
Large angle of the actuator opening and built-in side guides in the  
connector allow straight and exact insertion of the FPC / FFC.  
2. Rotating actuator  
Proven rotating actuator system allows easy ZIF connection,  
confirming it with a definite tactile feel. The contact securely  
holds the actuator in place, providing reliable normal force.  
The unique contact configuration assures that the connector  
will remain dimensionally stable over the device’s life.  
3. Strong FFC / FPC retention force  
Horizontal direction FFC / FPC retention force : Increased  
200% (as compared with FH12 series)(30 pos.)  
Support straight type FPC / FFC  
4. Accepts standard FPC/FFC thickness  
0.3mm thick standard Flexible Printed Circuit (FPC) and  
Flexible Flat cable (FFC) can be used.  
5. Conductive traces on the PCB can run under  
the connector  
No exposed contacts on the bottom of the connector.  
6. Board placement with automatic equipment  
Flat upper surface and tape and reel packaging facilitate  
vacuum pick-up and placement.  
Standard reel packaging contains 2,000 connectors.  
7. Halogen-free *  
*As defined by IEC61249-2-21  
Br-900ppm maximum, Cl-900ppm maximum,  
Cl + Br combined-1,500ppm maximum  
8. Optional 500 piece reel packaging  
Standard packaging is 2,000 pieces per reel; however, 500  
piece reels are possible.  
(Emboss reel external diameter is 330mm.)  
2010.9  
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Product Specifications  
Storage temperature range  
Operating temperature range-40ç to +85ç(Note 2)  
Operating humidity rangeRelative humidity 90% max.  
(No condensation)  
Rated current 0.5A DC(Note.1)  
Rated voltage 50V AC  
-10ç to +50ç (Note 3)  
Storage humidity range  
Relative humidity 90% max  
Rating  
Recommended FPC/FFC  
Item  
Thickness: = 0.3 0.05mm Gold plated contact traces  
Specification  
Conditions  
1.Insulation resistance 500 Mø min  
100 V DC  
2.Withstanding voltage No flashover or insulation breakdown.  
150 V AC /one minute  
1 mA (DC or 1000Hz)  
50 mø max.  
3.Contact resistance  
* Including FPC/FFC conductor resistance  
4.Durability  
Contact resistance: 50 mø max.  
20 cycles  
(insertion/ withdrawal) No damage, cracks, or parts dislocation.  
No electrical discontinuity of 1µs or more.  
Frequency: 10 to 55 Hz, single amplitude of 0.75  
mm, 10 cycles in each of the 3 directions.  
5.Vibration  
6.Shock  
Contact resistance: 50 mø max.  
No damage, cracks, or parts dislocation.  
No electrical discontinuity of 1µs. min.  
Contact resistance: 50 mø max.  
No damage, cracks, or parts dislocation.  
Contact resistance: 50 mø max.  
Insulation resistance: 50 Mø min.  
No damage, cracks, or parts dislocation.  
Contact resistance: 50 mø max.  
Insulation resistance: 50 Mø min.  
No damage, cracks, or parts looseness.  
No deformation of components affecting  
performance.  
Acceleration of 981 m/s2, 6 ms duration, sine half-  
wave waveform, 3 cycles in each of the 3 axis.  
96 hours at temperature of 40ç and humidity of  
90% to 95%.  
7.Humidity  
(Steady state)  
Temperature: -40ç■+15ç to+35ç■+85ç■+15ç to +35ç  
Time: 30■2 to 3■30■2 to 3 (Minutes)  
5 cycles  
Reflow: At the recommended temperature profile  
Manual soldering: 350ç 5ç for 5 seconds  
8.Temperature cycle  
9.Resistance to  
soldering heat  
Note 1: When passing the current through all of the contacts,use 70% of the current rating.  
Note 2: Includes temperature rise caused by current flow.  
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature  
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during  
transportation.  
Note.4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and  
specifications for a specific part number shown.  
■Materials / Finish  
Part  
Material  
LCP  
Finish  
Remarks  
UL94V-0  
Insulator  
Actuator  
Color: Gray  
Color: Black  
Gold plated  
Tin plated  
LCP  
Contacts  
Metal fittings  
Phosphor bronze  
Brass  
-------  
-------  
■Ordering information  
FH 28 D - 50S - 0.5 SH (05)  
1
2
3
4
5
6
7
Termination type : SMT horizontal mounting type  
specifications  
Series name  
Series No.  
Blank,D  
H
: FH  
1
2
3
6
: 28  
7
(05)…Gold plated,2,000 pieces / reel  
(10)…Partial gold plated,2,000 pieces / reel  
(07)…Gold plated(only 40pos.),2,000 pieces / reel  
(98)…Gold plated,500 pieces / reel  
: Standard  
: Space saving type  
Number of positions : 10 to 80  
Contact pitch : 0.5mm  
4
5
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Connector Dimensions  
Standard type  
A
0.5  
(0.2)  
Number of contacts indicator  
Polarizing mark indicator  
B
6.5  
5.7  
2
1
2
1
0.05MAX  
0
0.05MAX  
0
E
(1.3)  
0.1MAX  
0.1MAX  
0.7  
1.2  
4.5  
C(FPC/FFC insertion slot dimension)  
D
(2.85)  
(3.65)  
Notes  
1 The coplanarity of each terminal lead is within 0.1.  
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.  
3 Packaged on tape and reel only. Check packaging specification.  
4 Sight variations in color of the plastic compounds do not affect form, fit or function.  
5 After reflow, the terminal plating may change color, however this does not represent a quality issue.  
Unit: mm  
Part Number  
CL No.  
Number of contacts  
A
B
C
D
FH28-10S-0.5SH(**)  
FH28-15S-0.5SH(**)  
FH28D-20S-0.5SH(**)  
FH28D-28S-0.5SH(**)  
FH28D-30S-0.5SH(**)  
FH28-40S-0.5SH(**)  
FH28-45S-0.5SH(**)  
FH28D-50S-0.5SH(**)  
FH28D-55S-0.5SH(**)  
FH28-60S-0.5SH(**)  
FH28D-64S-0.5SH(**)  
FH28D-68S-0.5SH(**)  
FH28D-74S-0.5SH(**)  
CL586-1861-4-**  
CL586-1868-3-**  
CL586-1823-5-**  
CL586-1835-4-**  
CL586-1827-6-**  
CL586-1803-8-**  
CL586-1848-6-**  
CL586-1808-1-**  
CL586-1821-0-**  
CL586-1811-6-**  
CL586-1813-1-**  
CL586-1819-8-**  
CL586-1828-9-**  
10  
15  
20  
28  
30  
40  
45  
50  
55  
60  
64  
68  
74  
4.5  
9.9  
5.57  
9.58  
7
12.4  
14.9  
18.9  
19.9  
24.9  
27.4  
29.9  
32.4  
34.9  
36.9  
38.9  
41.9  
8.07  
12.08  
14.58  
18.58  
19.58  
24.58  
27.08  
29.58  
32.08  
34.58  
36.58  
38.58  
41.58  
9.5  
10.57  
14.57  
15.57  
20.57  
23.07  
25.57  
28.07  
30.57  
32.57  
34.57  
37.57  
13.5  
14.5  
19.5  
22  
24.5  
27.0  
29.5  
31.5  
33.5  
36.5  
Note 1: Tape and reel packaging.  
Order by number of reels.  
Note 2:  
Note 3:  
Metal fittings protruded type (FH28E) is available.  
Contact Hirose for details.  
**Indicates the specification. For details, please refer to ordering information.  
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
Space saving type  
A
0.5  
(0.2)  
Polarizing mark indicator  
Number of contacts indicator  
B
6
5.7  
2
1
2
1
0.05MAX  
0
0.05MAX  
0
E
(1.3)  
0.1MAX  
0.1MAX  
1.2  
4.5  
0.7  
C(FPC/FFC insertion slot dimension)  
D
(2.85)  
(3.15)  
Notes  
1 The coplanarity of each terminal lead is within 0.1.  
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.  
3 Packaged on tape and reel only. Check packaging specification.  
4 Sight variations in color of the plastic compounds do not affect form, fit or function.  
5 After reflow, the terminal plating may change color, however this does not represent a quality issue.  
Unit: mm  
Part Number  
CL No.  
Number of contacts  
A
B
C
D
FH28H-80S-0.5SH(**)  
586-1805-3-**  
80  
39.5  
44.9  
40.57  
45.7  
Note1: Tape and reel packaging.  
Order by number of reels.  
Note2: **Indicates the specification. For details, please refer to ordering information.  
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Recommended PCB mounting pattern and metal mask dimensions  
Recommended metal mask thickness: 0.15 mm.  
H
J
0.1  
0.1  
H
J
0.1  
0.1  
0.5 0.05  
0.3 0.03(Land)  
0.5 0.05  
0.3 0.03(Land)  
0.25 0.03(Metal mask)  
0.25 0.03(Metal mask)  
A
0.05  
A
0.05  
Standard type(FH28, FH28D)  
Space saving type(FH28H)  
■Recommended FPC/FFC dimensions  
1
0.5 0.05  
0.3 0.03  
0.3 0.05  
0.5 0.1  
A
F
0.05  
0.07  
0.1  
0.5 0.1  
G
Notes  
1 Straight type FPC / FFC does not have the side-protruding retention tabs (cross-hatched areas).  
2 W dimension should be 3.5mm min.  
Unit: mm  
J
Part Number  
CL No.  
Number of contacts  
F
G
H
7
FH28-10S-0.5SH(**)  
FH28-15S-0.5SH(**)  
FH28D-20S-0.5SH(**)  
FH28D-28S-0.5SH(**)  
FH28D-30S-0.5SH(**)  
FH28-40S-0.5SH(**)  
FH28-45S-0.5SH(**)  
FH28D-50S-0.5SH(**)  
FH28D-55S-0.5SH(**)  
FH28-60S-0.5SH(**)  
FH28D-64S-0.5SH(**)  
FH28D-68S-0.5SH(**)  
FH28D-74S-0.5SH(**)  
FH28H-80S-0.5SH(**)  
CL586-1861-4-**  
CL586-1868-3-**  
CL586-1823-5-**  
CL586-1835-4-**  
CL586-1827-6-**  
CL586-1803-8-**  
CL586-1848-6-**  
CL586-1808-1-**  
CL586-1821-0-**  
CL586-1811-6-**  
CL586-1813-1-**  
CL586-1819-8-**  
CL586-1828-9-**  
CL586-1805-3-**  
10  
15  
20  
28  
30  
40  
45  
50  
55  
60  
64  
68  
74  
80  
5.5  
7.1  
10.6  
13.1  
15.6  
19.6  
20.6  
25.6  
28.1  
30.6  
33.1  
35.6  
37.6  
39.6  
42.6  
46.7  
9.5  
8
9.6  
12.0  
16.0  
17.0  
22.0  
24.5  
27.0  
29.5  
32.0  
34.0  
36.0  
39.0  
42.0  
10.5  
14.5  
15.5  
20.5  
23  
12.1  
16.1  
17.1  
22.1  
24.6  
27.1  
29.6  
32.1  
34.1  
36.1  
39.1  
42.1  
25.5  
28.0  
30.5  
32.5  
34.5  
37.5  
40.5  
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■FH28 Series FPC Construction (Recommended Specifications)  
FPC : Flexible Printed Circuit  
1. Using Single-sided FPC  
Material Name  
Material  
Thickness (µm)  
Connecting side  
Covering film layer.  
Cover adhesive  
Polyimide 1 mil thick.  
25  
25  
0.2µm thick gold plated over 1 to 5µm  
Surface treatment  
Copper foil  
3
thick nickel underplating  
Cu  
1oz  
35  
Base adhesive  
Base film  
25  
Polyimide 1 mil thick  
25  
Reinforcement material adhesive Thermosetting adhesive  
30  
Stiffener  
Polyimide 3 mil thick  
Total  
175  
293  
Back side  
FPC : Flexible Printed Circuit  
2. Using Double-sided FPC  
Material Name  
Material  
Thickness (µm)  
Connecting side  
Covering layer film  
Cover adhesive  
Surface treatment  
Through-hole copper  
Copper foil  
Polyimide 1 mil thick  
0.2µm thick gold plated over 1 to 5µm  
thick nickel underplating  
3
15  
18  
18  
25  
18  
18  
25  
25  
50  
100  
297  
Cu  
Cu  
1/2oz  
Base adhesive  
Base film  
Polyimide 1 mil thick  
Base adhesive  
Copper foil  
Cu  
1/2oz  
Cover adhesive  
Covering layer film  
Reinforcement material adhesive  
Stiffener  
Polyimide 1 mil thick  
Thermosetting adhesive  
Polyimide 1 mil thick  
Total  
Back side  
* To prevent release of the lock due to FPC bending, use of the FPC with copper foil on the back side is NOT RECOMMENDED.  
FFC : Flexible Flat Cable  
3. Using FFC  
Material Name  
Material  
Thickness (µm)  
Connecting side  
Polyester film  
12  
30  
Adhesive  
Thermoplastic polyester  
Polyester  
Gold plated annealed copper foil  
Adhesive  
35  
30  
Polyester  
12  
Adhesive  
Polyester  
Polyester  
Total  
30  
Stiffener  
188  
295  
Back side  
4. Precautions  
1. This specification is a recommendation for the construction of the FH28 Series FPC and FFC (t=0.3 0.05).  
2. For details about the construction, please contact the FPC/FFC manufacturers.  
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Packaging specification  
■ Embossed carrier tape dimensions  
2
0.15 12 0.1  
(3)  
4 0.1  
(0.3)  
(7.1)  
(8.5)  
Standard (FH28,FH28D)  
■ Embossed carrier tape dimensions  
2
0.15  
12 0.1  
2
0.15  
12 0.1  
4
0.1  
4
0.1  
(3)  
(3)  
(0.3)  
(0.3)  
(7.1)  
(8.5)  
1.5+0.1  
0
(6.6)  
(8)  
Un-reeling direction  
1.5+0.1  
0
Un-reeling direction  
Standard (FH28,FH28D)  
Space saving type (FH28H)  
(2)  
■Reel Dimensions  
(S:INSIDE)  
(T:OUTSIDE)  
End section  
Mounting section  
Lead section (400mm min.)  
Embossed carrier tape  
Top cover tape  
Blank section  
Blank section  
(10 pockets min.)  
(10 pockets min.)  
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
Standard (FH28,FH28D)  
Unit: mm  
Part Number  
FH28-10S-0.5SH(**)  
FH28-15S-0.5SH(**)  
FH28D-20S-0.5SH(**)  
FH28D-28S-0.5SH(**)  
FH28D-30S-0.5SH(**)  
FH28-40S-0.5SH(**)  
FH28-45S-0.5SH(**)  
FH28D-50S-0.5SH(**)  
FH28D-55S-0.5SH(**)  
FH28-60S-0.5SH(**)  
FH28D-64S-0.5SH(**)  
FH28D-68S-0.5SH(**)  
FH28D-74S-0.5SH(**)  
CL No.  
Number of contacts  
K
L
M
N
Q
S
T
CL586-1861-4-**  
CL586-1868-3-**  
CL586-1823-5-**  
CL586-1835-4-**  
CL586-1827-6-**  
CL586-1803-8-**  
CL586-1848-6-**  
CL586-1808-1-**  
CL586-1821-0-**  
CL586-1811-6-**  
CL586-1813-1-**  
CL586-1819-8-**  
CL586-1828-9-**  
10  
15  
20  
28  
30  
40  
45  
50  
55  
60  
64  
68  
74  
24  
24  
24  
32  
32  
44  
44  
44  
44  
56  
56  
56  
56  
---------- 11.5 10.3 5.5 25.4 29.4  
---------- 11.5 8.8 25.4 29.4  
8
---------- 11.5 15.3 10.5 25.4 29.4  
28.4 14.2 19.3 14.5 33.4 37.4  
28.4 14.2 20.3 15.5 33.4 37.4  
40.4 20.2 25.3 20.5 33.4 37.4  
40.4 20.2 27.8  
23  
45.4 49.4  
40.4 20.2 30.3 25.5 45.4 49.4  
40.4 20.2 32.8 28.0 45.4 49.4  
52.4 26.2 35.3 30.5 57.4 61.4  
52.4 26.2 37.3 32.5 57.4 61.4  
52.4 26.2 39.3 34.5 57.4 61.4  
52.4 26.2 43.3 42.3 57.4 61.4  
Space saving type (FH28H)  
Unit: mm  
Part Number  
CL No.  
Number of contacts  
80  
K
L
M
N
Q
R
S
T
FH28H-80S-0.5SH(**)  
CL586-1805-3-**  
56  
52.4 26.2 46.3 45.3 40.5 57.4 61.4  
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Recommended Temperature Profile  
MAX 250ç  
250  
230ç  
HRS test condition  
Solder method  
:Reflow, IR  
200  
150  
100  
50  
200ç  
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu  
(Senju Metal Industry, Co., Ltd.'s Part  
(ç)  
Number:M705-221CM5-32-10.5)  
150ç  
Test board  
:Glass epoxy  
55mm∞150mm∞1.6mm thick  
Land,Metal mask dimensions : Our recommendations  
The temperature profiles are based on the above conditions.  
25ç  
(60sec.) 90 sec. to 120 sec.  
Preheating  
(60sec.)  
In individual applications the actual temperature may vary,  
depending on solder paste type, volume/thickness and  
board size/thickness. Consult your solder paste and  
equipment manufacturer for specific recommendations.  
Soldering  
0
Start  
60  
120  
Time (Seconds)  
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Operation and Precautions  
Operation  
Precautions  
1
Do not force the actuator to open beyond its fully open  
position. Do not use any type of tool to open the actuator.  
1.FPC/FFC insertion procedure.  
Connector installed on the board.  
1
Lift up the actuator. Use thumb or index finger  
116°  
2
Properly insert the FPC at the positioning part of the connector.  
Locking the FPC while it is partially inserted, may cause lock  
damage, disconnection of the FPC, or continuity fault.  
2
Fully insert the FPC in the connector parallel to  
mounting surface, with the exposed conductive  
traces facing down.  
3
Do not forcefully bend the FFC/FPC upward.  
Consult FFC/FPC manufacturer for the  
recommended bend radiuses.  
3
Rotate down the actuator until firmly closed. It is  
critical that the inserted FPC/FFC is not moved and  
remains fully inserted.  
4
For connectors with multiple contacts, such as 80  
pos. rotate down the actuator pushing at both ends.  
2.FPC/FFC removal  
Fully open the actuator.  
Carefully withdraw the FPC/FFC exercising caution  
not to deform or damage it.  
5
Application of excessive force to the inserted FPC/FFC may cause damage to  
connector and may affect the reliability of electrical connection.  
If specific application requires continuous or repeated pull or bend of the inserted  
FPC/FFC, assure that the forces are NOT transmitted directly to the connector.  
10  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
FH28 Series■0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Precautions (mating/un-mating FPC with the retention tabs)  
Operation  
Precautions  
2
Avoid “ride on”  
1.How to insert  
Avoid insertion so the cables ride on any guide. Be  
sure NOT to close the actuator as the cables ride  
on any guide. It may cause conduction failure.  
Insert the cable into the interspace between the  
mold walls ( ) at both ends of entrance where  
the connector is inserted and the guide walls (  
at both ends of interior connector so the cable tabs  
are properly located.  
)
Ride on a left guide  
Ride on a right guide  
Correct insertion  
2.Precautions when mating /un-mating  
1
Avoid insertion in diagonal direction.  
Do not insert the cable in diagonal direction.  
A part of the connector may touches the contacts  
resulting in deformation of the contacts.  
Do not close the actuator  
as the cables ride on.  
Insert the cable straight into the connector and  
hook the cable tabs with the guide.  
After insertion, slightly pull the cables to make sure  
the cable tabs are firmly secured. No removal of the  
cable means correct insertion.  
In the event it is locked as the cables ride on a  
guide, absolutely avoid moving the cable. In this  
case, open the actuator and re-insert the cable as  
instructed in “1.How to insert”.  
Insert the cable  
straight and obliquely  
from above.  
1
Do not move the cables back and forth and around as the  
cables ride on the guide when the actuator is closed.  
Slightly pull the cable  
to make sure the tabs  
are firmly secured.  
2
3 Close the actuator.  
11  

相关型号：

FH28H-80S-0.5SH(11)

 Card Edge Connector
HRS

FH28H-80S-0.5SH(51)

 Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS

FH28H-80S-0.5SH(98)

 Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS

FH29B-100S-0.2SHW(99)

 Card Edge Connector, 100 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS

FH29B-120S-0.2SHW(99)

 Card Edge Connector, 120 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS

FH29B-34S-0.2SHW(05)

 Card Edge Connector, 34 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS

FH29B-34S-0.2SHW(99)

 Card Edge Connector, 34 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS

FH29B-44S-0.2SHW(99)

 Card Edge Connector, 44 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS

FH29B-50S-0.2SHW(99)

 Card Edge Connector, 50 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS

FH29B-60S-0.2SHW(05)

 Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS

FH29B-70S-0.2SHW(99)

 Card Edge Connector, 70 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS

FH29B-90S-0.2SHW(99)

 Card Edge Connector, 90 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
©2020 ICPDF网 联系我们和版权申明