FH29B-60S-0.2SHW(05) [HRS]
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT;
| 型号： | FH29B-60S-0.2SHW(05) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT PC 连接器 |
| 文件： | 总13页 (文件大小：385K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
FH29B Series
Space saving (80 pos. shown)
ꢀ
4.55mm
ꢀFeatures
Can be mounted over conductive traces.
ꢀ
1. Low profile, small PCB mounting area, weight
reduction
Protruding only 1.2mm above the board connector
occupies 40% less area than comparable type having
contacts spaced on 0.3mm centers.
Creative design, coupled with high manufacturing
capabilities resulted in extremely low weight on the
connector.
No exposed contacts on the bottom of the connector
Operation
2. Easy solderability on the PC board
The soldering leads are on 0.4mm pitch, exiting on front
and back of the connector.
ꢀ
Actuator
Actuator open
1
2
3. FPC temporary hold and verification of correct
insertion
1
Insert FPC
The connector has built-in FPC hold protrusions allowing
the tactile feel of the correct FPC insertion and holding it
in position before closing of the actuator.
4. Uses standard 0.2mm thick FPC
FPC notch
Proven Flip Lock actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
2
FPC
5. One-finger operation of the actuator
Proven (in several other Hirose’s connectors) Flip-Lock
rotating actuator assures reliable mechanical and
electrical connection with FPC, confirming it with a
definite tactile feel.
6. Conductive traces on the PCB can run
under the connector
Close the actuator
FPC connected
3
4
No exposed contacts on the bottom of the connector.
7. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows the use of vacuum nozzles.
3
Standard reel contains 5,000 connectors.
3
ꢀApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectiors.
4
2008.4
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀProduct Specifications
Operating temperature range -55ç to +85ç (Note 2)
Rated current 0.25 A DC(Note 1)
Rated voltage 40 V AC/DC
Storage temperature range -10ç to +50ç(Note 3)
Rating
Operating humidity range
Relative humidity 90% max.
(No condensation)
Storage humidity range
Relative humidity 90% max.
+
Recommended FPC
Thickness: = 0.2 /- 0.03mm gold plated
Item
Specification
500 M ohms min.
Conditions
1.Insulation resistance
2.Withstanding voltage
100 V DC
No flashover or insulation breakdown.
120 V AC / 1 minute
100 m ohms max.
* Including FPC conductor resistance
3.Contact resistance
1 mA
4.Durability
(insertion/ withdrawal)
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
20 cycles
No electrical discontinuity of longer.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
10 cycles in each of the 3 directions.
5.Vibration
6.Shock
No electrical discontinuity of longer.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
7.Humidity
(Steady state)
96 hours at 40ç and humidity of 90% to 95%.
+
+
+
+
+
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
Temperature: -55ç/ 15ç to 35ç/ 85ç/ 15ç to 35ç
Time: 30 /2 to 3 /30 /2 to 3 (Minutes)
5 cycles
8.Temperature cycle
9.Resistance to
soldering heat
Reflow: At the recommended temperature profile
No deformation of components affecting performance.
+
Manual soldering: 350ç /-10ç for 5 seconds
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
---------------
Insulator
Actuator
Contacts
Color: Beige
PA
Color: Dark brown
Gold flash plated
Phosphor bronze
ꢀOrdering information
FH29B - 80S - 0.2 SHW (05)
1
2
3
4
5
Series name: FH29B
Terminal type
1
2
4
5
SHW: SMT horizontal mounting type
No. of contacts
Number of contacts: 34,40,44,50,60,70,
80,90,100,120
Plating specifications
(05): Gold flash plated
Contact pitch: 0.2 mm
3
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀConnector Dimension
A
B
A
Xn
0.15 A
0.4
(0.15)
∆
A**
Xn
0.15 A
0.4
(0.15)
B
(C:FPC insertion slot dimension)
B
B
(3.6)
(0.4)
0.25
0.3
(1.42)
(1.44)
0.25
0.79
1
1
0.45
4.55
Notes
1
2
3
The coplanarity of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
The form of the actuator is as depicted by the broken line in connectors having 92 or more contacts.
Unit: mm
RoHS
A
Part Number
CL No.
Number of Contacts
B
C
n
580-0312-2-05
580-0313-5-05
580-0314-8-05
580-0315-0-05
580-0316-3-05
580-0317-6-05
580-0318-9-05
580-0319-1-05
580-0320-0-05
580-0321-3-05
34
40
8.62
6.4
7.24
8.44
9.24
17
20
22
25
30
35
40
45
50
60
FH29B- 34S-0.2SHW(05)
FH29B- 40S-0.2SHW(05)
FH29B- 44S-0.2SHW(05)
FH29B- 50S-0.2SHW(05)
FH29B- 60S-0.2SHW(05)
FH29B- 70S-0.2SHW(05)
FH29B- 80S-0.2SHW(05)
FH29B- 90S-0.2SHW(05)
FH29B-100S-0.2SHW(05)
FH29B-120S-0.2SHW(05)
9.82
7.6
44
10.62
11.82
13.82
15.82
17.82
19.82
21.82
25.82
8.4
50
9.6
10.44
12.44
14.44
16.44
18.44
20.44
24.44
60
11.6
13.6
15.6
17.6
19.6
23.6
YES
70
80
90
100
120
Tape and packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BRecommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness: 0.12mm
ꢀ
(A)
B
C
0.4
∞n
0.04 C
0.22 0.02(LAND PATTERN)
0.2 0.01(METAL MASꢀ)
∞n
0.04 C
0.4
0.22 0.02(LAND PATTERN)
0.2 0.01(METAL MASꢀ)
B
Note: The Recommended Land Dimensions Diagram is an example. The dimensions may differ depending on the mounting conditions
(including the cream solder, board size, and temperature profile); therefore, use of the connectors should follow a thorough check
of the mounting conditions.
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
n
580-0312-2-05
580-0313-5-05
580-0314-8-05
580-0315-0-05
580-0316-3-05
580-0317-6-05
580-0318-9-05
580-0319-1-05
580-0320-0-05
580-0321-3-05
34
40
8.62
17
20
22
25
30
35
40
45
50
60
FH29B- 34S-0.2SHW(05)
FH29B- 40S-0.2SHW(05)
FH29B- 44S-0.2SHW(05)
FH29B- 50S-0.2SHW(05)
FH29B- 60S-0.2SHW(05)
FH29B- 70S-0.2SHW(05)
FH29B- 80S-0.2SHW(05)
FH29B- 90S-0.2SHW(05)
FH29B-100S-0.2SHW(05)
FH29B-120S-0.2SHW(05)
6.4
9.82
7.6
44
10.62
11.82
13.82
15.82
17.82
19.82
21.82
25.82
8.4
50
9.6
60
11.6
13.6
15.6
17.6
19.6
23.6
70
80
90
100
120
Tape and packaging (5,000 pieces/reel).
Order by number of reels.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BPackaing Specifications
Embossed Carrier Tape Dimensions
Tape width up to 24mm
ꢀ
(2)
2
0.15
4
0.1
8 0.1
(0.3)
(5.65)
2
Tape width 32mm and over
ꢀ
0.15
8
0.1
4
0.1
(2)
C
L
(0.3)
1.5+0.15
0
(5.65)
(1.52)
Flat surface, for placement with automatic equipment
Unreeling direction
Unit: mm
J
H
Part Number
CL No.
Number of Contacts
D
E
F
G
580-0312-2-05
580-0313-5-05
580-0314-8-05
580-0315-0-05
580-0316-3-05
580-0317-6-05
580-0318-9-05
580-0319-1-05
580-0320-0-05
580-0321-3-05
34
40
9.62
7.5 -----------
11.5 -----------
11.5 -----------
11.5 -----------
11.5 -----------
11.5 -----------
24
24
24
24
24
24
32
44
44
44
25.4
25.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
FH29B- 34S-0.2SHW(05)
FH29B- 40S-0.2SHW(05)
FH29B- 44S-0.2SHW(05)
FH29B- 50S-0.2SHW(05)
FH29B- 60S-0.2SHW(05)
FH29B- 70S-0.2SHW(05)
FH29B- 80S-0.2SHW(05)
FH29B- 90S-0.2SHW(05)
FH29B-100S-0.2SHW(05)
FH29B-120S-0.2SHW(05)
10.82
11.62
12.82
14.82
16.82
18.82
20.82
22.82
26.82
44
50
60
70
80
14.2
20.2
20.2
20.2
28.4
40.4
40.4
40.4
90
100
120
Reel Dimensions
ꢀ
Lead section (400mm min.)
Mounting section
End section
(H:INSIDE)
Blank section
Blank section
Top cover tape
Embossed carrier tape
(J:OUTSIDE)
(10 pockets min.)
(10 pockets min.)
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BFPC Recommended Dimensions Diagram
ꢀ
0.05
0.2 0.03
L
0.05
0.03
B
0.4 0.07
0.4 0.07
0.4 0.03
A
B
Covering
layer
M
0.05
(ꢀ)
(0.1)
(0.1)
0.27 0.03
0.27 0.03
0.13 0.03
Positioning tab
0.17 0.03
(0.07)
For checking FPC
disengagement shift
1
To prevent pattern cutting, when 4.7 mm or more of reinforecement film cannot be secured, make the overlap amount
0.5 mm or greater.
Unit: mm
M
Part Number
CL No.
Number of Contacts
ꢀ
L
8.06
FH29B- 34S-0.2SHW(05)
FH29B- 40S-0.2SHW(05)
FH29B- 44S-0.2SHW(05)
FH29B- 50S-0.2SHW(05)
FH29B- 60S-0.2SHW(05)
FH29B- 70S-0.2SHW(05)
FH29B- 80S-0.2SHW(05)
FH29B- 90S-0.2SHW(05)
FH29B-100S-0.2SHW(05)
FH29B-120S-0.2SHW(05)
580-0312-2-05
580-0313-5-05
580-0314-8-05
580-0315-0-05
580-0316-3-05
580-0317-6-05
580-0318-9-05
580-0319-1-05
580-0320-0-05
580-0321-3-05
34
40
7.2
6.87
9.26
8.4
8.07
10.06
11.26
13.26
15.26
17.26
19.26
21.26
25.26
44
9.2
8.87
50
10.4
12.4
14.4
16.4
18.4
20.4
24.4
10.07
12.07
14.07
16.07
18.07
20.07
24.07
60
70
80
90
100
120
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BFPC Construction (Recommended Specifications)
Using Double-sided FPC
Thickness(µm)
Material Name
Material
Polyimide
3-Layer CCL 2-Layer CCL
Contact area
Contact area
Covering layer film
Cover adhesive
25.0
30.0
3.5
12.5
25.0
3.5
Surface treatment
Pattern copper plating
Pattern copper foil
Base adhesive
Nickel base gold plated
13.0
18.0
10.0
25.0
10.0
18.0
13.0
25.0
12.5
30.0
25.0
203.0
13.0
12.0
---------
25.0
---------
Base film
Polyimide
Base adhesive
Pattern copper foil
Pattern copper plating
Cover adhesive
12.0
13.0
20.0
12.5
30.0
75.0
216.0
Covering layer film
Reinforecement material adhesive
Stiffener
Polyimide
Total
Through hole
Note: Recommended FPC thickness: 0.2 0.03mm
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BRecommended Temperature Profile
Using Lead-free Solder Paste
ꢀ
HRS test condition
MAX 250ç
Solder method
: Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2)
250
200
150
100
50
Environment
: Room air
230ç
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
200ç
(Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5)
Test board
Land dimensions : 0.22mm∞0.85mm, 0.22mm∞1.25mm
Metal mask : 0.20∞0.85∞0.12mm thick
: Glass epoxy 25mm∞45mm∞0.8mm thick
150ç
(ç)
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may vary, depending
on solder paste type, volume/thickness and board size/thickness.
Consult your solder paste and equipment manufacturer for specific
recommendations.
25ç
(60sec.) 90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
0
Start
Time (Seconds)
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
BOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
FPC temporary hold protrusion
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2. FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
135°
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
These connectors are of a miniature and thin design and must be handled with care.
Please check the following matters and use accordingly.
Precautions When Board Mounting
SAmount of board flexing
The amount of board flexing should be kept to a minimum.
The degree of flatness of these connectors is 0.1 mm or less; however, a large amount of flexing may give
rise to solder faults.
* Various factors can contribute to flexing and we ask that you conduct a check beforehand.
SConnector Load
Do not apply an external force of 0.5 N or greater to the connector before mounting. Doing so could damage
the connector. Before mounting, do not insert FPC and do not operate the connector.
S Board Load
Be careful that a load is not applied to the board during an assembly process such as when dividing boards
into a number of smaller ones, or when fastening boards with screws.
Doing so may damage the connector.
Connector
100
Board
F
Connector
Board
F
100
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting or coupling FPC.
SActuator Operation
1
Be careful not to apply excessive force when opening the actuator from the initial condition (prior to FPC
insertion). Also note that the deep insertion of a fingernail, finger, or something else could misshape the
contacts as indicated the diagrams below.
Example 1
Example 2
2 As illustrated in the diagram below, the actuator rotates centered on an axis of rotation and the actuator
should be operated so that it rotates.
Axis of
rotation
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
3 The actuator is designed so that it does not open
more than 135 degrees. Do not apply force to make it
move back further. (Refer to the diagrams below.)
Excessive force will cause the lock lever to bend or
break. (Force should be 1 N or less.)
4 When operating the actuator, do so from
the center portion.
As illustrated in the diagrams below, do not
take the actuator with your fingers and lift it
or pick it.
5
Doing so may cause damage. (Do not
perform any operations other than the
rotation operation previously described in
2
Step .)
S Contact Orientation
This connector is a bottom-contact connector and the FPC conductor exposed surface is inserted facing
downward.
S FPC Insertion
1 There is an FPC positioning tab that requires the FPC to be inserted at an angle of about 10° with
respect to the board surface and perpendicular to the connector, and the FPC should be inserted firmly
all the way to the back.
Diagonal insertion of the FPC will result in a short-circuit fault due to a shift of the pitch, and the corner
of the FPC may catch on the contacts and cause the contacts to become misshapen.
FPC temporary hold protrusion
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
SFPC Insertionw
2
Do not insert the FPC on an angle from above.
As illustrated in the diagram below, when the FPC has been inserted on an angle during the FPC
insertion procedure, the FPC will bend and the pattern may break, or the FPC may not be inserted
sufficiently which will cause a conduction fault.
*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space
at the time of board layout. Also note that insertion will be difficult when the FPC is too short and we ask
that due consideration be given to a suitable parts layout.
*Please contact the FPC manufacturer for information about the FPC bending qualities and breakage.
SChecking the Locked Condition
When locking, check that the actuator is level with the board surface as illustrated in the diagram below.
Note that when the actuator is oriented in the vicinity of 0 degrees, measures should be taken so that an
excessive load is not applied. Such a load may cause contact misshaping. (Force should be 1 N or less.)
Precautions When Routing the FPC After FPC Coupling
SFPC Load
Be careful not to apply a load to the FPC after FPC mounting. Doing so may release the lock of the
connector or cause FPC disconnection or damage. Especially if a load is applied to the FPC in a
continuous manner, measures should be taken to anchor the FPC.
Also, with regard to routing the FPC, take measures not to abruptly bend the FPC in the vicinity of the
insertion area.
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH29B Seriesꢀ0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
Precautions When Removing the FPC
SWhen releasing the actuator, release it in the vicinity of the center portion.
When the lock is closed with the FPC inserted, rotating the actuator from the tip could result in actuator
damage.
STo pull out the FPC, first release the actuator, then pull out the FPC.
There is an FPC positioning tab that requires the FPC to be pulled out at an angle of about 10° with
respect to the board surface.
Pulling out the FPC level with the board (at about 0˚), or applying a load of 5 N or greater to the connector
(FPC positioning cutout), introduces the possibility that the connector (FPC positioning cutout) will be
damaged.
135°
FPC temporary hold protrusion
Other Precautions
SHand Soldering Precautions
When hand soldering for repair or at other times, pay attention to the following matters.
1
2
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Be careful not to apply excessive heat or touch the soldering iron anywhere other than the connector
leads. Doing so will cause the connector to become misshapen or melt.
3
Do not supply excessive solder (flux).
Supplying excessive solder (flux) to the contacts will cause the flux to adhere to the contacts or the
rotating portion of the actuator. This will cause a contact fault or trouble with the rotation operation of the
actuator. Also note that application of excessive solder to the reinforcement fittings will give rise to
breakdown of the rotation operation of the lock lever and will cause connector damage.
13
相关型号：
FH29B-70S-0.2SHW(99)
Card Edge Connector, 70 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
FH29B-90S-0.2SHW(99)
Card Edge Connector, 90 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
FH29BJ-70S-0.2SHW(99)
Card Edge Connector, 70 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29BJ-90S-0.2SHW(99)
Card Edge Connector, 90 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FH29BW-22S-0.2SHW(05)
Card Edge Connector, 22 Contact(s), 2 Row(s), Female, Right Angle, 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH29BW-22S-0.2SHW(99)
Card Edge Connector, 22 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29BW-24S-0.2SHW(05)
Card Edge Connector, 24 Contact(s), 2 Row(s), Female, Right Angle, 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH29BW-24S-0.2SHW(99)
Card Edge Connector, 24 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
©2020 ICPDF网 联系我们和版权申明