FH28E-60S-0.5SH(98) [HRS]
Card Edge Connector, 60 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking;
| 型号： | FH28E-60S-0.5SH(98) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 60 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking PC 连接器 |
| 文件： | 总12页 (文件大小：536K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
FH28 Series
Robust locking structure
Reinforced fitting provide support and prevent
the actuator from disengaging from the connector.
Each terminal is attached to the actuator,
so the actuator is supported along its entire length.
■Features
The FPC positioning mechanism and FPC tabs help to
guide and hold the FPC prior to engaging the actuator
1. Highly reliable connection and robust structure
Multi-polarized connectors, reinforced body structure and
high FPC retention produced by the following features:
Reliable connection created by its unique FPC/FFC
positioning mechanism
Prevents accidental disengagement with the design
of its proprietary structure
2. Simplified operations
The flip lock structure makes it easier to
engage/disengage the actuator and reduces the
required force needed to operate. A clear tactile click
is delivered upon the successful completion of the
mating process.
3. Increased FPC/FFC retention force
Vertical retention force for the FPC/FFC is 2.5 times
stronger than our 0.5 mm pitch connector the FH12 series.
Horizontal retention force for the FPC/FFC is 2 times
stronger than our 0.5 mm pitch connector the FH12 series
*To realize the horizontal retention force values, the use of
the FPC positioning tabs are required. FPC without the
positioning tabs will comply with the specifications rated
on the FH12 series.
Can also be used with straight sided, non-tabbed
FPC/FFC
4. Accepts standard 0.3 mm thick FPC/FFC
It accepts 0.3 mm thick products that are easy to
manufacture and have superb insertion performance.
5. Fully molded structure aids PCB layout
The bottom of this connector is enclosed by a fully
molded structure that protects the contacts and
removes any restrictions from PCB patterning and
design.
6. Supports automatic pick-n-place mounting
Offered in tape and reel packaging that is compatible with
automatic machine mounting. (2,000 pieces per reel)
7. Halogen-free
All materials and substances used to produce this product
comply with Halogen-free standards.*Defined according
to IEC61249-2-21. Br: 900 ppm maximum, Cl: 900 ppm
maximum, Br+Cl: 1,500 ppm maximum
8. Multiple packing options
The standard packaging is 2,000 pieces per reel, but
it is also offered in a 500 piece reel. (The outer
diameter of the reel will be Ø330 mm in this case.)
2013.11w
1
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Product Specifications
Operating Temperature Range
Storage Temperature Range
Rated Current
Rated Voltage
0.5 A (Note 1)
AC 50 Vrms
~
~
-40 +85ç (Note 2)
-10 +50ç (Note 3)
Ratings
Operating Humidity Range
Storage Humidity Range
Relative humidity 90% or less (no condensation shouldbe present) Relative humidity 90% or less (no condensation should be present)
Adaptive FPC/FFC
contact specifications
t= 0.3 0.05 Gold plating
Item
Specification
Conditions
Minimum of 500 Mø
Measured with DC 100 V
1. Insulation Resistance
2. Withstanding Voltage
No flashover or breakdown
AC 150 Vrms is applied for one minute.
Maximum of 50 mø
*including FPC/FFC conductor resistance
Measured at 1mA (DC or 1,000Hz)
3. Contact Resistance
4. Durability
Contact Resistance: Maximum of 50 mø
No damaged, cracked or looseness of parts
20 mating cycles
Frequency: 10 to 55Hz
Single amplitude of 0.75mm for 10 cycles in 3 axial
directions
No electrical discontinuity of 1μs or greater
Contact Resistance: Maximum of 50 mø
No damages, cracks and looseness of parts
5. Vibration Resistance
6. Shock Resistance
No electric discontinuity of 1μs or greater
Contact Resistance: Maximum of 50 mø
No damaged, cracked or looseness of parts
2
Acceleration of 981m/s , 6ms duaration, sine half-wave
waveform 3 cycles in each of the 3 axis
Contact Resistance: Maximum of 50 mø
Insulation Resistance: Minimum of 50 Mø
No damaged, cracked or looseness of parts
7. Humidity Resistance
of Steady State
96 hours at temperature: 40ç and humidity: 90 to 95%
Contact Resistance: Maximum of 50 mø
Insulation Resistance: Minimum of 50 Mø
No damaged, cracked or looseness of parts
Temperature: -40 +15 to +35 +85 +15 to +35
ç
/
/
/
Time: 30 2 to 3 30 2 to 3 minutes
8. Temperature Cycles
/
/
/
5 cycles
Should not have external deformity or loose
parts
Reflow: according to the Recommended Temperature Profile
Hand solder: 350 5ç for 5 seconds
9. Solder Heat
Resistance
(Note 1) When energizing rated current to all contacts, use 70% of rated current.
(Note 2) Includes temperature rise caused by current flow.
(Note 3) The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature
and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage.
■Materials
Component
Materials
LCP
Color/Finish
Gray
Remarks
UL94V-0
Insulator
Black
LCP
Gold plating
Contact
Phosphor bronze
Brass
---------------
---------------
Metal fitting
Pure tin plating
■Product Number Structure
Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in
this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please
make sure to check the latest delivery specifications at the time of product use.
( )
( )
FH 28 D - 50 25 S B - 0.5 SH 05
1
2
3
4
5
6
7
9
10
8
Series Name: FH
Contact arrangement: Single (single row)
1
6
7
Eccentric direction: Blank…Standard type (without eccentricity)
B…Eccentric type (contacts on the opposite side of polarity mark)
Series No.: 28
2
3
None, D: Standard type
E: Long reinforcing fitting type
H: Space-saving type
Contact Pitch: 0.5 mm, 1 mm
8
Standard type: The number of contacts
Eccentric type: Number of contacts in 0.5mm housing
Mounting direction , SH...SMT horizontal mounting type
4
5
9
Specification: (05) …Gold plating, 2,000 pieces per reel
(10) Specification:…Partial gold plating, 2,000 pieces per reel
(07)…Gold plating (for 40 contact only.), 2,000 pieces per reel
(98)…Gold plating, 500 pieces per reel
10
Standard type: Blank
Eccentric type: Actual number of pins
2
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Connector Dimensions
[Standard type] 0.5 mm pitch product
A
0.5
(0.2)
No. of contacts
Contact mark
2
B
6.5
5.7
2
1
1
0.05MAX
0
0.05MAX
0
E
(1.3)
0.1MAX
0.1MAX
0.7
1.2
4.5
C (FPC/FFC insertion dimensions)
D
(2.85)
(3.65)
Notes
1
The coplanarity of the metal fitting and contact is 0.1 MAX.
The contact lead position shows the dimension from the E surface of the case bottom.
2
3
This product is sold in embossed, tape and reel packaging. For details on this product please refer to the “Packaging
Specifications”located on page 9.
4
5
Recesses in part structure may be added to improve molding characteristics.
Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors.
The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors.
■Connector dimension table [Standard type]
Unit: mm
D
HRS No.
A
B
C
Part No.
No. of Contacts
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
10
15
20
28
30
40
45
50
55
60
64
68
74
4.5
9.9
5.57
9.58
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
7
12.4
14.9
18.9
19.9
24.9
27.4
29.9
32.4
34.9
36.9
38.9
41.9
8.07
12.08
14.58
18.58
19.58
24.58
27.08
29.58
32.08
34.58
36.58
38.58
41.58
9.5
10.57
14.57
15.57
20.57
23.07
25.57
28.07
30.57
32.57
34.57
37.57
13.5
14.5
19.5
22
24.5
27.0
29.5
31.5
33.5
36.5
(Note 1) This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either 2,000 or 500
piece reels. Please place orders by full reel quantities.
3
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Connector Dimensions
[Standard type] 1 mm pitch product
(2.7)
A
(3.2)
1
(0.2)
No. of contacts
Contact mark
B
6.5
5.7
2
1
2
1
0.05MAX
0
0.05MAX
0
E
(1.3)
C (FPC/FFC insertion dimensions)
D
0.1MAX
0.1MAX
0.7
1.2
4.5
(2.85)
(3.65)
Notes
1
2
3
The lead flatness of metal fitting and contact is 0.1 MAX.
The contact lead position shows the dimension from the E surface of the case bottom.
This product is sold in embossed, tape and reel packaging. For details on this product please refer to the “Packaging
Specifications” located on page 9.
4
5
Recesses in part structure may be added to improve molding characteristics
Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors.
The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors.
■Connector dimension table [Standard type]
Unit: mm
D
Part No.
HRS No.
No. of Contacts
A
B
C
FH28D-20(10)SB-1SH(**)
FH28D-30(15)SB-1SH(**)
FH28-40(20)SB-1SH(**)
FH28D-50(25)SB-1SH(**)
FH28-60(30)SB-1SH(**)
FH28D-64(32)SB-1SH(**)
FH28D-68(34)SB-1SH(**)
10
15
20
25
30
32
34
9
14.9
19.9
24.9
29.9
34.9
36.9
38.9
10.57
15.57
20.57
25.57
30.57
32.57
34.57
14.58
19.58
24.58
29.58
34.58
36.58
38.58
CL586-1863-0-**
CL586-1860-1-**
CL586-1832-6-**
CL586-1817-2-**
CL586-1818-5-**
CL586-1852-3-**
CL586-1812-9-**
14
19
24
29
31
33
(Note 1) This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either 2,000 or 500
piece reels. Please place orders by full reel quantities.
4
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Connector Dimensions
[Space-saving type]
A
0.5
(0.2)
Contact mark
No. of contacts
B
6
5.7
2
1
0
2
1
0MAX
0MAX
0
E
(1.3)
0.15MAX
0.15MAX
1.2
4.5
0.7
C (FPC/FFC insertion dimensions)
D
(2.85)
(3.15)
Notes
1
2
3
The lead flatness of metal fitting and contact is 0.1 MAX.
The contact lead position shows the dimension from the E surface of the case bottom.
This product is sold in embossed, tape and reel packaging. For details on this product please refer to the “Packaging
Specifications” located on page 9.
4
5
Recesses in part structure may be added to improve molding characteristics
Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors.
The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors.
■Connector dimension table [Space-saving type]
Unit: mm
D
Part No.
HRS No.
No. of Contacts
A
B
C
FH28H-80S-0.5SH(**)
CL586-1805-3-**
80
39.5
44.9
40.57
45.7
(Note 1) This product is sold in embossed, tape and reel packaging. This product is sold in full reel quantities of either 2,000 or 500
piece reels. Please place orders by full reel quantities.
5
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Recommended PCB layout and metal mask dimensions for 0.5 mm
pitch products
Recommended metal mask thickness: t= 0.15
H
J
0.1
0.1
H
J
0.1
0.1
0.5 0.05
0.3 0.03 (land)
0.5 0.05
0.3 0.03 (land)
0.25 0.03 (metal mask)
0.25 0.03 (metal mask)
A
0.05
A
0.05
Standard type (FH28, FH28D)
Space-saving type (FH28H)
■Recommended FPC/FFC dimensions for 0.5 mm pitch products
1
0.5 0.05
0.3 0.03
0.3 0.05
0.5 0.1
A
F
0.05
0.07
0.1
0.5 0.1
G
Notes
1
2
The stiffener needs to be a minimum of 0.188 (7.5 mil) thick.
The W dimension needs to be a minimum of 0.5 mm.
■Recommended PCB layout, metal mask and FPC dimensions for 0.5
mm pitch products
Unit: mm
Part No.
HRS No.
No. of Contacts
F
G
H
J
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
FH28H-80S-0.5SH(**)
CL586-1861-4-**
CL586-1868-3-**
10
15
20
28
30
40
45
50
55
60
64
68
74
80
5.5
7.1
10.6
13.1
15.6
19.6
20.6
25.6
28.1
30.6
33.1
35.6
37.6
39.6
42.6
46.7
7
8
9.6
9.5
10.5
14.5
15.5
20.5
23
12.1
16.1
17.1
22.1
24.6
27.1
29.6
32.1
34.1
36.1
39.1
42.1
12.0
16.0
17.0
22.0
24.5
27.0
29.5
32.0
34.0
36.0
39.0
42.0
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
CL586-1805-3-**
25.5
28.0
30.5
32.5
34.5
37.5
40.5
6
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Recommended PCB layout and metal mask dimensions for 1 mm
pitch products
Recommended metal mask thickness: t= 0.15
H
J
0.1
0.1
0.3 0.03 (land)
0.25 0.03 (metal mask)
1
0.05
1.75 0.1
A
0.05
1.25 0.1
■Recommended FPC/FFC dimensions for 1mm pitch products
1
0.5 0.05
0.3 0.03
0.3 0.05
0.5 0.1
A
F
0.05
0.07
0.1
0.5 0.1
G
Note 1 The stiffener needs to be a minimum of 0.188 (7.5 mil) thick.
Note 2 The W dimension needs to be a minimum of 0.5 mm.
■Recommended PCB layout, metal mask and FPC dimensions for 1
mm pitch products
Unit: mm
Part No.
HRS No.
No. of Contacts
F
G
H
J
FH28D-20(10)SB-1SH(**)
FH28D-30(15)SB-1SH(**)
FH28-40(20)SB-1SH(**)
FH28D-50(25)SB-1SH(**)
FH28-60(30)SB-1SH(**)
FH28D-64(32)SB-1SH(**)
FH28D-68(34)SB-1SH(**)
CL586-1863-0-**
CL586-1860-1-**
10
15
20
25
30
32
34
10.5
15.5
20.5
25.5
30.5
32.5
34.5
12.1
17.1
22.1
27.1
32.1
34.1
36.1
15.6
20.6
25.6
30.6
35.6
37.6
39.6
12
17
22
27
32
34
36
CL586-1832-6-**
CL586-1817-2-**
CL586-1818-5-**
CL586-1852-3-**
CL586-1812-9-**
7
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■
FH28 Series FPC/FFC Material Configuration (Recommended Specifications)
FPC : Flexible Printed Circuit
1. Single-Sided FPC
Layer
Cover lay film
Cover adhesive
Materials
Thickness (μm)
1mil
Polymide
(25)
(25)
Under nickel plating 1~5 μm+gold plating 0.2 μm
3
35
25
25
30
Surface treatment
Copper foil
Cu
Heat stiffener adhesive
Polymide 1mil
Heat stiffener adhesive
1oz
Base adhesive
Base film
Stiffener adhesive
Reinforcing film
Polymide
Total
7mil
175
293
FPC : Flexible Printed Circuit
2. Double-sided FPC
Layer
Cover lay film
Cover adhesive
Surface treatment
Through hole copper
Copper foil
Materials
Thickness (
μ
(25)
(25)
3
m)
Polymide 1mil
Under nickel plating 1~5 μm+ gold plating 0.2 μm
Cu
15
Cu
Heat stiffener adhesive
Polymide 1mil
Heat stiffener adhesive
Cu 1/2oz
Heat stiffener adhesive
Polymide 1mil
Heat stiffener adhesive
1/2oz
18
Base adhesive
Base film
18
25
Base adhesive
Copper foil
18
(18)
25
Cover adhesive
Cover lay film
Stiffener adhesive
Reinforcing film
25
50
Polymide
Total
4mil
100
297
* Remove the copper foil on the back of double-sided FPC to avoid
damage due to FPC bending.
FFC : Flexible Flat Cable
3. FFC
Layer
Materials
Thickness (μm)
12
Polyester film
30
Adhesive
Polyester thermal plasticity
Polyester type
Annealed copper foil (Gold plated with under nickel plating)
35
Adhesive
30
Polyester
12
Adhesive
Polyester type
Polyester type
30
Reinforcing film
188
295
Total
Nominal thickness tolerance is approximately 20μm.
1. These specifications are an example of the material configuration of an FPC/FFC (t= 0.3 0.05) used on the FH28
series.
2. Please contact the FPC/FFC manufacturer for the material configurations of their FPC/FFC.
8
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Packaging Specifications
[Common specifications for FH28 Series]
Embossed Carrier Tape Dimensions (with a maximum tape width of 24 mm)
●
2
0.15 12 0.1
(3)
4 0.1
(0.3)
(7.1)
(8.5)
Standard type (FH28, FH28D)
Embossed Carrier Tape Dimensions (with a minimum tape width of 32 mm)
●
2
0.15
12 0.1
2
0.15
12 0.1
4
0.1
4
0.1
(3)
(3)
(0.3)
(0.3)
(7.1)
(8.5)
1.5+0.1
0
(6.6)
(8)
Unreeling Direction
1.5+0.1
0
Unreeling Direction
Standard type (FH28, FH28D)
Space-saving type (FH28H)
Reel Dimensions
●
(S: Reel inner width)
(T: Reel outer width)
End section
Loaded product section
Leader section (minimum of 400 mm)
Embossed Carrier Tape
containing product
Cover tape
Empty pockets
Empty pockets
(minimum of 10 pockets)
(minimum of 10 pockets)
9
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Packaging specification dimensions [standard type] for 0.5 mm pitch
products
Unit: mm
Part No.
HRS No.
No. of Contacts
K
L
M
N
Q
S
T
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
FH28-45S-0.5SH(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
10
15
20
28
30
40
45
50
55
60
64
68
74
24
24
24
32
32
44
44
44
44
56
56
56
56
----------
----------
----------
28.4
28.4
40.4
40.4
40.4
40.4
52.4
52.4
52.4
52.4
11.5
11.5
11.5
14.2
14.2
20.2
20.2
20.2
20.2
26.2
26.2
26.2
26.2
10.3
12.8
15.3
19.3
20.3
25.3
27.8
30.3
32.8
35.3
37.3
39.3
43.3
5.5
25.4
25.4
25.4
33.4
33.4
33.4
45.4
45.4
45.4
57.4
57.4
57.4
57.4
29.4
29.4
29.4
37.4
37.4
37.4
49.4
49.4
49.4
61.4
61.4
61.4
61.4
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
8
10.5
14.5
15.5
20.5
23
25.5
28.0
30.5
32.5
34.5
42.3
■Packaging specification dimensions [standard type] for 1 mm pitch
products
Unit: mm
Part No.
HRS No.
No. of Contacts
K
L
M
N
Q
S
T
FH28D-20(10)SB-1SH(**)
FH28D-30(15)SB-1SH(**)
FH28-40(20)SB-1SH(**)
FH28D-50(25)SB-1SH(**)
FH28-60(30)SB-1SH(**)
FH28D-64(32)SB-1SH(**)
FH28D-68(34)SB-1SH(**)
10
15
20
25
30
32
34
24
32
44
44
56
56
56
----------
28.4
40.4
40.4
52.4
52.4
52.4
11.5
14.2
20.2
20.2
26.2
26.2
26.2
15.3
20.3
25.3
30.3
35.3
37.3
39.3
10.5
15.5
20.5
25.5
30.5
32.5
34.5
25.4
33.4
45.4
45.4
57.4
57.4
57.4
29.4
37.4
49.4
49.4
61.4
61.4
61.4
CL586-1863-0-**
CL586-1860-1-**
CL586-1832-6-**
CL586-1817-2-**
CL586-1818-5-**
CL586-1852-3-**
CL586-1812-9-**
■Packaging specification dimensions [Space-saving type]
Unit: mm
T
Part No.
HRS No.
No. of Contacts
80
K
L
M
N
Q
R
S
FH28H-80S-0.5SH(**)
56
52.4
26.2
46.3
45.3
40.5
57.4
61.4
CL586-1805-3-**
■Recommended soldering profile
Applicable Conditions
Reflow type : Far red/hot air reflow
250
Reflow furnace atmosphere : Atmosphere
230ç
Soldering
: Cream type
Sn/3.0Ag/0.5Cu
200
150
100
50
200ç
(M705-221CM5-32-10.5 made
by Senju Metal Industry Co.)
: Glass epoxy 55∞150∞1.6 mm
Testing PCB
150ç
(ç)
Land/metal mask dimensions Our recommendation
conditions
This solder profile is based on the conditions provided
above.
Please check the mounting conditions before use,
conditions such as solder paste types, manufacturer,
PCB size and any other soldering materials may alter
the performance of such materials.
(60 sec.)
(60 sec.)
25ç
90 to 120 seconds
Pre-heating time
Soldering Time
0
Start
Time (sec)
10
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Operation Methods of Connector and Precautions
Operation Methods
Precautions for use
1
The actuator on the FH28 series connector is
designed to open to a maximum of 116 degrees, trying
to open it farther than that will lead to damage.
1. FPC/FFC insertion method
1
Rotate the actuator upward to unlock it
The actuator can be easily operated with
the use of a thumb nail or index finger.
116˚
2
Insert the FPC/FFC into the insertion slot
as show below. Improper insertion can
lead to damage and ultimately malfunction.
Positioning part
2
Insert the FPC/FFC with the contact sur-
face facing down. FH28 is a bottom contact
type connector.
Insert FPC/FFC from the diagonally left
side of the connector. Insert the FPC/FFC
at a diagonal angle and lay it into position.
Insert it until the FPC/FFC is securely
hooked on the positioning area. Check to
see if it is retained by pulling lightly on it.
For detail, refer to the next page.
3
Do not pull on the FPC/FFC in an upward
direction, doing this can damage the con-
nector as it is not equipped to handle a
large amount of force in this direction.
3
Rotate the actuator downward.
4
When dealing with a higher contact count (80 posi-
tions), be sure to use two fingers to close the actuator
on both sides. Using one finger might not close it
completely and leave an incomplete connection.
2. Removing the FPC/FFC
5
When inserting FPC/FFC, do not rub it hard on the lower sur-
face of the insertion slot of the connector. Otherwise, the con-
tact hits hard on the FPC/FFC, and may cause the deformation
of the contact or conductor separation etc. of the FPC/FFC.
During the insertion of the FPC/FFC, make sure that
1
Rotate the actuator upward, then angle the
FPC/FFC upward after the actuator has been
released and remove the FPC/FFC straight out.
11
FH28 Series●0.5 mm and 1 mm Pitch, 2.55 mm Height FPC/FFC Connectors
■Cautions when mating FFFC/FPC with positioning tabs
Operation Methods
Precautions for use
PC/FFC must not over lap
2
1. Position for insertion
Do not close the actuator until the FPC/FFC has been
placed into its correct position. If it is sitting on the guides
and the actuator closes onto it, it can cause damage and
alter its performance.
Insert the cable into the gap (
) between the side walls
(
) on both sides of the cable insertion port' and the 'guide
) on both sides of the inner part of the connector'
walls (
putting the tab of the cable on the gap.
Incorrectly placed onto
the left guide
Incorrectly placed onto
the right guide
2. Cautions during insertion/mating
Do not insert the FPC/FFC at an skewed angle (as
shown), this type of action may cause the corner of the
cable to get hooked and deform its contacts.
1
Normal insertion
Skwed insertion
Do not close the actuator with
the cable sitting on either guide.
Insert the cable straight into the connector opening and
hook the cable tab onto the guide.
Pull the cable towards yourself with a slight force after
insertion, and close the actuator after confirming that the
cable tab is completely secured.
If it cannot be pulled to out, the cable can be determined to
be inserted into the correct position.
Recommended mating method
In case you accidentally close the lock with the cable sitting
on the guides, do not move the cable around to make it
seat. Open the actuator immediately and reposition the
cable as explained in “1. Position for insertion” noted
above.
Insert the cable
straight from the
diagonally left
side.
1
Pull the cable lightly to
yourself and check if
the tab is secured.
2
Pulling direction
Close the actuator.
3
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
FH28E-68S-0.5SH(98)
Card Edge Connector, 68 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH28H-80S-0.5SH(05)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH28H-80S-0.5SH(07)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH28H-80S-0.5SH(10)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH28H-80S-0.5SH(51)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH28H-80S-0.5SH(98)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH29B-100S-0.2SHW(99)
Card Edge Connector, 100 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH29B-120S-0.2SHW(99)
Card Edge Connector, 120 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FH29B-34S-0.2SHW(05)
Card Edge Connector, 34 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH29B-34S-0.2SHW(99)
Card Edge Connector, 34 Contact(s), 1 Row(s), Right Angle, 0.008 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator
HRS
FH29B-44S-0.2SHW(99)
Card Edge Connector, 44 Contact(s), 1 Row(s), 0.016 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
©2020 ICPDF网 联系我们和版权申明