首页 |元器件品牌

HRF-SW1001 [HONEYWELL]

SPDT Absorptive RF Switch; SPDT吸收射频开关
HRF-SW1001
型号： HRF-SW1001
厂家： Honeywell    Honeywell
描述：

SPDT Absorptive RF Switch
SPDT吸收射频开关

开关 射频开关 光电二极管
文件： 总6页 (文件大小：64K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
HRF-SW1001  
SPDT Absorptive RF Switch  
Features  
•
•
•
•
•
•
•
•
High Isolation Of > 40 dB @ 2 GHz  
Low Insertion Loss Of 1.1dB @ 2 GHz  
DC To 4GHz Operating Frequency  
Integrated CMOS Control Logic  
Integrated ESD Protection on Digital I/O  
Single Positive Supply Voltage  
Ultra Small LPCCTM Packaging  
Impedance matched for 75 Ohm systems  
Product Description  
The Honeywell HRF-SW1001 is a high performance  
single pole double throw (SPDT) absorptive RF switch  
that is ideal for use in wireless basestation and handset  
applications that require minimum power and minimum  
insertion loss.  
HRF-SW1001 in LPCCTM Package  
The HRF-SW1001 is manufactured with Honeywell's  
patented Silicon On Insulator (SOI) CMOS technology,  
which provides the performance of GaAs with the  
economy and integration capabilities of conventional  
CMOS technology.  
RF Electrical Specifications @ + 25oC  
Results @ Vdd=5.0 =/- 10%, Vss = 0 unless otherwise stated, Z0=75 ohms  
Parameter  
Insertion Loss  
Test Condition  
Frequency  
DC – 0.5 GHz  
2.0 GHz  
Minimum  
Typical  
Maximum  
Units  
dB  
dB  
0.9  
1.1  
1.4  
1.5  
1.7  
1.9  
3.0 GHz  
dB  
Isolation  
DC – 0.5 GHz  
2.0 GHz  
3.0 GHz  
DC – 0.5 GHz  
2.0 GHz  
50  
40  
35  
53.5  
42.5  
39.0  
1.1:1  
1.2:1  
1.2:1  
dB  
dB  
dB  
Ratio  
Ratio  
Ratio  
VSWR*  
3.0 GHz  
1.3:1  
1dB Compression  
Input IP3  
Input Power  
Vss=Gnd  
Vss= -3  
1.0 GHz  
1.0 GHz  
21  
29  
dBm  
dBm  
Two-Tone Inputs Up To + 5 dBm  
Vss=Gnd  
2.0 GHz  
2.0 GHz  
35  
35  
10  
20  
10  
dBm  
dBm  
nS  
nS  
mV  
Vss= -3  
Trise, Tfall*  
Ton, Toff  
Transients  
10% To 90%  
50% Cntl To 90%/10%Rf  
In-Band  
*By design  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 1  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1001  
DC Electrical Specifications @ + 25oC  
Parameter  
Single VDD Supply Voltage  
Minimum  
3.3*  
Typical  
Maximum  
5.5  
Units  
V
5.0  
CMOS Logic Level (0)  
0
0.8  
V
CMOS Logic Level (1)  
VDD – 0.8  
VDD  
V
Input Leakage Current  
10  
uA  
* Performance curves are for Vdd = +5.0 +/- 10%  
Absolute Maximum Ratings1  
Parameter  
Absolute Maximum  
Units  
VDD  
+6.0  
V
Vin Digital Logic 0  
Vss - 0.6  
Vdd + 0.6  
> 35  
V
V
Vin Digital Logic 1  
Maximum Input Power  
ESD Voltage  
dBm  
400  
V
Operating Temperature Range  
Storage Temperature Range  
+85  
Degrees C  
Degrees C  
+125  
(Note 1) Operation beyond any of these parameters may cause permanent damage.  
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1001 is immune to latch-up.  
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be  
taken to ensure that the Absolute Maximum Ratings are not exceeded.  
Package Outline Drawing  
Bottom View, 12 Pin 3X3 mm LPCCTM Package  
ASAT LPCC Marketing Outline Dwg. # GMJ00004  
For more information see http://www.asat.com  
3 mm  
3 mm  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 2  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1001  
Truth Table  
Switch Control  
RF Output 1  
RF INPUT  
- - -  
RF Output 2  
- - -  
0
1
RF INPUT  
"0" = CMOS Low, "1” = CMOS High  
Pin Configuration  
Pin  
1
2
3
4
Function  
GROUND  
RF OUT 2  
GROUND  
Pin  
7
8
Function  
GROUND  
RF OUT 1  
GROUND  
GROUND  
RF IN  
9
VDD  
10  
11  
12  
5
6
SWITCH CONTROL  
VSS  
GROUND  
Evaluation Circuit Board Connections  
RF  
HRF-  
Evaluation  
Top  
RF  
RF  
Honeywell HRF-SW1000  
VSS  
Ground  
VDD  
Open  
SW  
Control  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 3  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1001  
Performance Curves  
Insertion Loss  
Insertion Loss versus Frequency  
0
-1  
The Insertion Loss curve shows the worst  
case loss versus frequency at Vdd = +5.0 +/-  
10%, Ta = 25C, Z0 = 75 Ohms  
-2  
-3  
-4  
-5  
-6  
-7  
-8  
-9  
-10  
0
1
2
3
4
Frequency  
Isolation  
Isolation versus Frequency  
-20.00  
-30.00  
-40.00  
-50.00  
-60.00  
-70.00  
-80.00  
-90.00  
-100.00  
The Isolation curve shows the typical isolation  
of an “off” state output to the insertion path.  
0
0.5  
1
1.5  
2
2.5  
3
Frequency (GHz)  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 4  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1001  
Return Loss  
Input / Output Return Losses versus Frequency  
0.00  
-5.00  
-10.00  
-15.00  
-20.00  
-25.00  
-30.00  
-35.00  
-40.00  
-45.00  
-50.00  
The return loss curve shows the input  
return loss S11, the output return loss in  
the insertion path S22, and the output  
return loss in the isolation state S33.  
0
0.5  
1
1.5  
2
2.5  
3
Frequency (GHz)  
Evaluation Circuit Board  
Honeywell's evaluation board provides  
an easy to use method of evaluating the  
RF performance of our switch. Simply  
connect power, DC and RF signals to  
be measuring switch performance in  
less than 10 minutes.  
HRF-SW1001 Evaluation Board  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 5  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1001  
Evaluation Circuit Board Layout Design Details  
Item  
Description  
PCB  
Impedance Matched Multi-Layer FR4  
Switch  
HRF-SW1001 RF Switch  
Chip Capacitor  
RF Connector  
DC Pin  
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V  
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector  
Mil-Max Model 800-10-064-10-001 Header Pins  
Ordering Information  
Ordering Number  
HRF-SW1001-B  
HRF-SW1001-TR  
Product  
Delivered In Chip Tubes  
Delivered On Tape And Reel2  
Engineering Evaluation Board  
HRF-SW1001-E  
(Note 2) Contact Honeywell for details  
LPCCTM is a registered Trademark of ASAT Ltd.  
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume  
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any  
license under its patent rights nor the rights of others.  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 1001W  
Published June 2002 Page 6  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  

相关型号：

HRF-SW1001-B

 SPDT Absorptive RF Switch
HONEYWELL

HRF-SW1001-E

 SPDT Absorptive RF Switch
HONEYWELL

HRF-SW1001-TR

 SPDT Absorptive RF Switch
HONEYWELL

HRF-SW1020-B

 SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.3dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-20
HONEYWELL

HRF-SW1020-FL-TR

 SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, HALOGEN FREE AND ROHS COMPLIANT, ULTRA SMALL, VQFN-20
HONEYWELL

HRF-SW1020-GR-T

 SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL

HRF-SW1020-GR-TR

 SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL

HRF-SW1021

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-E

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-T

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-TR

 SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20
HONEYWELL

HRF-SW1022-B

 SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20
HONEYWELL
©2020 ICPDF网 联系我们和版权申明