HRF-SW1020-FL-TR [HONEYWELL]
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, HALOGEN FREE AND ROHS COMPLIANT, ULTRA SMALL, VQFN-20;型号: | HRF-SW1020-FL-TR |
厂家: | Honeywell |
描述: | SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, HALOGEN FREE AND ROHS COMPLIANT, ULTRA SMALL, VQFN-20 射频 微波 |
文件: | 总5页 (文件大小:232K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HRF-SW1020
SP4T Absorptive RF Switch DC To 2.5 GHz Operation
The Honeywell HRF-SW1020 is a high performance single pole four throw (SP4T)
absorptive RF switch ideal for use in wireless basestation and handset applications
that require minimum power and minimum insertion loss.
The HRF-SW1020 is manufactured with Honeywell's patented Silicon On Insulator
(SOI) CMOS technology, which provides the performance of GaAs with the
economy and integration capabilities of conventional CMOS technology. These
switches are DC coupled to improve lower operating frequency, frequency response
and reduce the number of DC bias points required.
FEATURES
HRF-SW1020 in VQFN Package
Typical High Isolation Of > 40 dB @ 2 GHz
Typical Low Insertion Loss Of 1.7dB @ 1 GHz
Integrated CMOS Control Logic
DC-coupled, bi-directional RF Path
Single Positive Supply Voltage
Ultra Small VQFN Packaging
Impedance matched for 50 Ohm systems
Lead-free, RoHS compliant and halogen-free
RF ELECTRICAL SPECIFICATIONS @ + 25oC
Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohms
Contact Honeywell for relative performance at other supply configurations
Parameter
Test Condition
Frequency
Minimum
Typical
Maximum
Units
1.0 GHz
2.0 GHz
2.5 GHz
1.6
1.7
1.8
1.9
2.2
2.3
dB
dB
dB
Insertion Loss
1.0 GHz
2.0 GHz
2.5 GHz
45
33
30
54
41
39
dB
dB
dB
Isolation
Return Loss
Input P1dB
-15
-20
dB
VSS= Gnd
VSS = -5V
1.0 GHz
1.0 GHz
17
27
dBm
dBm
Two-Tone Inputs, up to + 5 dBm
VSS = Gnd
Input IP3
2.0 GHz
2.0 GHz
35
36
dBm
dBm
VSS = -5V
Trise, Tfall
Ton, Toff
10% To 90%
50% Cntl To 90% / 10% RF
10
20
ns
ns
HRF-SW1020
DC ELECTRICAL SPECIFICATIONS @ + 25°C
Parameter
Minimum
3.31
Typical
5.0
Maximum
Units
V
VDD
VSS
IDD
5.5
-5.0
V
<5
35
0.8
VDD
10
uA
V
CMOS Logic Level (0)
CMOS Logic Level (1)
Input Leakage Current
0
VDD – 0.8
V
uA
Note 1 - Performance curves are for VDD = +5.0 +/- 10%
ABSOLUTE MAXIMUM RATINGS1
Parameter
Absolute Maximum
Units
VDD
VSS
+6.0
-5.5
-0.6
V
V
Vin Digital Logic 0
V
Vin Digital Logic 1
Vdd + 0.6
> 35
V
Input Power
ESD Voltage2
dBm
V
400
Moisture Sensitivity Level
Operating Temperature Range
Storage Temperature Range
Level 3 @ 260°C
-40 to +85
-65 to +125
°C
°C
Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.
Note 2 - Although the HRF-SW1020 contains ESD protection circuitry on all digital inputs, precautions should be taken to
ensure that the Absolute Maximum Ratings are not exceeded.
Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1020 is immune to latch-up.
TRUTH TABLE
C1
C0
RF Output 1
RF Output 2
RF Output 3
RF Output 4
0
0
1
1
0
1
0
1
RFINPUT
RFINPUT
RFINPUT
RFINPUT
"0" = CMOS Low, "1” = CMOS High
PIN CONFIGURATIONS
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
4
5
GROUND
RFOUTPUT4
GROUND
VDD
6
7
8
9
10
RFOUTPUT3
GROUND
GROUND
GROUND
RFOUTPUT2
11
12
13
14
15
C1
C0
GROUND
RFOUTPUT1
GROUND
16
17
18
19
20
GROUND
GROUND
RFINPUT
GROUND
VSS
GROUND
Note: Bottom ground plate must be grounded for proper RF performance.
2
www.honeywell.com/microwave
HRF-SW1020
PERFORMANCE CURVES
Insertion Loss
Typical SW1020 Insertion Loss
0
-0.5
-1
-1.5
-2
-2.5
-3
-3.5
-4
0
0.5
1
1.5
2
2.5
Frequency (GHz)
Isolation
Typical SW1020 Isolation
-20
-30
-40
-50
-60
-70
-80
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
www.honeywell.com/microwave
3
HRF-SW1020
PACKAGE OUTLINE DRAWING
Notes
1. Pin 1 identifier can be a combination or a dot and/or chamfer. A chamfer is on the bottom ground plane.
2. Dimensions are in millimeters.
HALOGEN-FREE MATERIAL SET
The –FL switches have a halogen-free material set that can withstand a maximum soldering temperature of 260OC.
LEAD FINISH
The package leads are Nickel Palladium with a Gold and Silver flash (NiPdAu+Ag). The configuration being manufactured
and delivered today is lead-free and RoHS compliant. Plating thicknesses are listed below in microns (um).
Ni = 0.254 um min Pd = 0.00254 um min Au+Ag = 0.00508 um min Au Composition = 30% min to 70% max
LEAD FREE QFN SURFACE MOUNT APPLICATION
Please see Application Note AN310a for assembly process recommendations. The maximum soldering temperature of
o
the - FL is 260 C. Application Notes can be found at our website: www.honeywell.com/microwave
CIRCUIT APPLICATION INFORMATION
These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input
and output without a DC ground reference provided as part of the circuit. See Application Note AN311.
4
www.honeywell.com/microwave
HRF-SW1020
EVALUATION CIRCUIT BOARD
Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply
connect power; DC and RF signals to be measuring switch performance in less than 10 minutes.
Gnd
C1
C0
RF Input
VSS
VDD
Gnd
HRF-SW1020-A
HRF-SW1020
Evaluation Board
Top View
RF Out4
RF Out1
HRF-SW1020 Evaluation Board
RF Out3
RF Out2
EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS
Item
Description
PCB
Impedance Matched Multi-Layer FR4
HRF-SW1020 RF Switch
Switch
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
ORDERING INFORMATION
Ordering Number
Delivery Method
Units Per Shipment
HRF-SW1020-FL-TR
HRF-SW1020- E
Tape & Reel
Evaluation Board
2500 Units per Reel
One Board Per Box
The new –FL switches replace and are electrically equivalent with the –GR switches. The –GR switches are obsolete.
FIND OUT MORE
For more information on Honeywell’s Microwave Products visit us online at www.honeywellmicrowave.com or contact
us at 800-323-8295 (763-954-2474 internationally).
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Honeywell
12001 Highway 55
Plymouth, MN 55441
Tel: 800-323-8295
www.honeywellmicrowave.com
Form #1020W
May 2012
©2012 Honeywell International Inc.
相关型号:
HRF-SW1020-GR-T
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL
HRF-SW1020-GR-TR
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL
HRF-SW1021-TR
SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20
HONEYWELL
HRF-SW1030-B
SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-24
HONEYWELL
©2020 ICPDF网 联系我们和版权申明