19-21-S2C-AQ1R2B-3T [EVERLIGHT]
0603 Package Chip LED (0.8mm Height); 0603封装贴片LED（ 0.8毫米高）
| 型号： | 19-21-S2C-AQ1R2B-3T |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | 0603 Package Chip LED (0.8mm Height) |
| 文件： | 总10页 (文件大小：184K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.8mm Height)
19-21/S2C-AQ1R2B/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 19-21 SMD Taping is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Lens Color
Material
Emitted Color
19-21/S2C-AQ1R2B/3T
AlGaInP
Brilliant Orange
Water Clear
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 1 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Package Outline Dimensions
-
+
Note: The tolerances unless mentioned are ±0.1, unit = mm.
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 2 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
Unit
5
V
Forward Current
IF
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
Power Dissipation
IFP
60
mA
Pd
60
mW
V
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
ESD
Topr
Tstg
2000
-40 ~ +85
-40 ~ +90
℃
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Viewing Angle
mcd
deg
nm
Iv
2θ1/2
λp
72.0
----
-----
100
611
180
----
----
Peak Wavelength
Dominant
----
IF=20mA
600.5
----
----
17
612.5
----
λd
nm
Wavelength
Spectrum Radiation
Bandwidth
△λ
VF
nm
V
Forward Voltage
Reverse Current
1.75
----
-----
----
2.35
10
VR=5V
IR
μA
Notes:
1.Tolerance of Luminous Intensity: ±10%
2.Tolerance of Dominant Wavelength: ±1nm
3.Tolerance of Forward Voltage: ±0.1V
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 3 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Bin Range Of Dom. Wavelength
Groups
Bin
D8
Min
Max
603.5
606.5
609.5
612.5
Unit
Condition
600.5
603.5
606.5
609.5
D9
A
nm
IF=20mA
D10
D11
Bin Range Of Luminous Intensity
Bin
Q1
Q2
R1
R2
Min
72.0
90.0
112
140
Max
Unit
mcd
Condition
IF=20mA
90.0
112
140
180
Bin Range Of Forward Voltage
Groups
Bin
0
Min
1.75
1.95
2.15
Max
Unit
V
Condition
IF=20mA
1.95
2.15
2.35
B
1
2
Notes:
1.Tolerance of Luminous Intensity: ±10%
2.Tolerance of Dominant Wavelength: ±1nm
3.Tolerance of Forward Voltage: ±0.1V
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 4 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 5 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 6 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned are ±0.1, unit = mm.
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 7 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Hours/Cycles
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
Low Temperature
Storage
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%R.H.
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 8 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 9 of 10
Prepared by: Zhang Cheng
EVERLIGHT ELECTRONICS CO., LTD.
19-21/S2C-AQ1R2B/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : SZDSE-191-S07
http://www.everlight.com
Prepared date:18-Apr.-2006
Rev.1
Page: 10 of 10
Prepared by: Zhang Cheng
相关型号：
©2020 ICPDF网 联系我们和版权申明