19-21-W1D-ANPHY [EVERLIGHT]

White Chip LED; 白光LED芯片


型号：	19-21-W1D-ANPHY
厂家：	EVERLIGHT ELECTRONICS CO., LTD
描述：	White Chip LED 白光LED芯片
文件：	总11页 (文件大小：149K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet

0603 Package White Chip LED

19-21/W1D-ANPHY/3T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-Free.

Descriptions

․The 19-21 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No.

Lens Color

Material

InGaN

Emitted Color

19-21/W1D-ANPHY/3T

Pure White

Yellow Diffused

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 1 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Package Outline Dimensions

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 2 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Absolute Maximum Ratings (Ta=25℃)

Parameter

Symbol

Rating

Unit

Reverse Voltage

Forward Current

Operating Temperature

Storage Temperature

Soldering Temperature

Electrostatic Discharge

Power Dissipation

-40 ~ +85

-40 ~ +90

260 (for 5 seconds)

150

℃

Topr

Tstg

Tsol

ESD

℃

110

Peak Forward Current

(Duty 1/10 @1KHz)

I^FP

100

Electro-Optical Characteristics (Ta=25℃)

Parameter

Symbol

Min.

28.5

-----

Typ.

-----

110

Max.

72.0

-----

Unit

mcd

deg

Condition

IF=5mA

VR=5V

Luminous Intensity

Viewing Angle

2θ1/2

Forward Voltage

Reverse Current

2.70

-----

3.15

μA

Bin Range Of Luminous Intensity & Forward Voltage

Symbol

Bin Code

Min.

Max.

Unit

mcd

Condition

IF=5mA

28.5

45.0

2.70

2.85

3.00

45.0

72.0

2.85

3.00

3.15

IF=5mA

Notes:

1.Tolerance of Luminous Intensity ±15%

2.Tolerance of Forward Voltage ±0.1V

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 3 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Chromaticity Coordinates Specifications for Bin Grading

IF= 5mA

CIE_y

Groups

Bin Code

CIE_x

0.274

0.294

0.274

0.294

0.314

0.294

0.314

0.334

0.314

0.334

0.226

0.258

0.286

0.254

0.258

0.291

0.319

0.286

0.254

0.286

0.315

0.282

0.286

0.319

0.347

0.315

0.282

0.315

0.343

0.311

0.315

0.347

0.376

0.343

Notes:

1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).

2.The products are sensitive to static electricity and care must be fully taken when

handling products.

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 4 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

CIE Chromaticity Diagram

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 5 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Typical Electro-Optical Characteristics Curves

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 6 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Label explanation

CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 7 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Moisture Resistant Packaging

Aluminum moistue-proof bag

Label

Desiccant

Label

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 8 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

Test

Hours/Cycles

Sample

Size

No.

Items

Test Condition

Ac/Re

0/1

Temp. : 260℃±5℃

Reflow Soldering

22 PCS.

6 Min.

Min. 5sec.

H : +100℃ 15min

300 Cycles

Temperature Cycle

Thermal Shock

22 PCS.

0/1

∫ 5 min

L : -40℃ 15min

H : +100℃ 5min

22 PCS.

0/1

∫ 10 sec

L : -10℃ 5min

High Temperature

Storage

Low Temperature

Storage

1000 Hrs.

Temp. : 100℃

Temp. : -40℃

22 PCS.

0/1

DC Operating Life

IF = 20 mA

1000 Hrs.

High Temperature /

High Humidity

85℃/ 85%RH

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 9 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 10 of 11

Prepared by: Jessica Chang

EVERLIGHT ELECTRONICS CO.,LTD.

19-21/W1D-ANPHY/3T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No. : DSE-191-W0

http://www.everlight.com

Prepared date: 03-25-2004

Rev. 1.0

Page: 11 of 11

Prepared by: Jessica Chang

相关型号：