19-21-W1D-ANPHY-3T [EVERLIGHT]
0603 Package Chip LED (0.8 mm Height); 0603封装贴片LED （0.8 mm高度）
| 型号： | 19-21-W1D-ANPHY-3T |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | 0603 Package Chip LED (0.8 mm Height) |
| 文件： | 总11页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.8 mm Height)
19-21/W1D-ANPHY/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-Free.
Descriptions
․The 19-21 SMD LED is much smaller than lead
frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Lens Color
Material
InGaN
Emitted Color
19-21/W1D-ANPHY/3T
Pure White
Yellow Diffused
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 1 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 2 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
5
Unit
Reverse Voltage
VR
V
Forward Current
Operating Temperature
Storage Temperature
Soldering Temperature
Electrostatic Discharge
Power Dissipation
IF
25
-40 ~ +85
-40 ~ +90
260 (for 5 seconds)
150
mA
℃
Topr
Tstg
Tsol
ESD
Pd
℃
℃
V
110
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
100
mA
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
28.5
-----
Typ.
-----
110
Max.
72.0
-----
Unit
mcd
deg
Condition
IF=5mA
VR=5V
Iv
Luminous Intensity
Viewing Angle
2θ1/2
VF
IR
V
Forward Voltage
Reverse Current
2.70
-----
-----
-----
3.15
50
μA
Bin Range Of Luminous Intensity & Forward Voltage
Symbol
Bin Code
Min.
Max.
Unit
mcd
Condition
IF=5mA
N
P
28.5
45.0
2.70
2.85
3.00
45.0
72.0
2.85
3.00
3.15
IV
15
16
17
VF
V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 3 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Chromaticity Coordinates Specifications for Bin Grading
Groups
Bin Code
1
CIE_x
CIE_y
Condition
0.274
0.274
0.294
0.294
0.274
0.274
0.294
0.294
0.294
0.294
0.314
0.314
0.294
0.294
0.314
0.314
0.314
0.314
0.334
0.334
0.314
0.314
0.334
0.334
0.226
0.258
0.286
0.254
0.258
0.291
0.319
0.286
0.254
0.286
0.315
0.282
0.286
0.319
0.347
0.315
0.282
0.315
0.343
0.311
0.315
0.347
0.376
0.343
2
3
4
5
6
A
IF= 5mA
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 4 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
CIE Chromaticity Diagram
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 5 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 6 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 7 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 8 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 9 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 10 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
19-21/W1D-ANPHY/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-191-W01
http://www.everlight.com
Prepared date: 08-06-2004
Rev. 1.0
Page: 11 of 11
Prepared by: Jessica Chang
相关型号：
©2020 ICPDF网 联系我们和版权申明