11-22-R6G6C-QSANP-2T [EVERLIGHT]
Chip LED with Bi-Color (Multi-Color); 芯片具有双色LED (多色)型号: | 11-22-R6G6C-QSANP-2T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Chip LED with Bi-Color (Multi-Color) |
文件: | 总11页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Chip LED with Bi-Color (Multi-Color)
11-22/R6G6C-QSANP/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
Descriptions
․The 11-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Lens Color
Type
R6
Material
AlGaInP
Emitted Color
Brilliant Red
Water Clear
G6
AlGaInP
Brilliant Yellow Green
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 1 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Package Outline Dimensions
Red -
+
+
Green -
Polarity 1
0.5
Cathode mark
3.0
2.0
1.8
1.5
1.1
R0.45
For reflow soldering (propose)
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 2 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
5
Unit
V
Reverse Voltage
VR
R6:25
Forward Current
IF
mA
G6:25
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
-40 ~ +90
260
℃
℃
Soldering Temperature
Electrostatic Discharge
Power Dissipation
Tsol
ESD
Pd
℃
V
(for 5 second)
2000
R6:60
mW
G6:60
Peak Forward Current
(Duty 1/10 @1KHz)
R6:60
IFP
mA
G6:60
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
72.0
28.5
Typ.
Max.
285.0
72.0
Unit Condition
Iv
R6
G6
Luminous Intensity*1
Viewing Angle
-----
mcd
deg
nm
2θ1/2
λp
-----
60
-----
R6
G6
632
575
Peak Wavelength
-----
-----
IF=20mA
nm
λd R6
-----
624
-----
20
-----
Dominant Wavelength*2
G6
569.5
577.5
△λ R6
G6
nm
V
Spectrum Radiation
Bandwidth
-----
-----
20
Forward Voltage
Reverse Current
VF
-----
-----
2.0
2.4
10
VR=5V
IR
-----
μA
Notes: 1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 3 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
R6
Bin Range Of Luminous Intensity
Bin
Q
Min
72.0
Max
112.0
180.0
285.0
Unit
mcd
Condition
IF=20mA
R
112.0
180.0
S
Notes: Tolerance of Luminous Intensity ±10%
G6
Bin Range Of Dom. Wavelength
Group
Bin
C16
C17
C18
C19
Min
Max
571.5
573.5
575.5
577.5
Unit
Condition
IF=20mA
569.5
571.5
573.5
575.5
A
nm
Bin Range Of Luminous Intensity
Bin
N
Min
28.5
45.0
Max
Unit
mcd
Condition
IF=20mA
45.0
72.0
P
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 4 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 5 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Typical Electro-Optical Characteristics Curves
G6
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 6 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 7 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 8 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 9 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 10 of 11
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-QSANP/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C02
http://www.everlight.com
Prepared date: 05-Jan-2005
Rev. 1
Page: 11 of 11
Prepared by: Jessica Chang
相关型号:
11-22SURSYGC/S530-A2/TR8
Dual Color LED, Brilliant Red/brilliant Yellow Green, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明